FCC ID HSW-934
Frequency Hopping RF Modem
by Murata Electronics North America
Grantee Code: HSW Product Code: 934
Latest application date: 2011-12-15
FCC ID Device Details
| FCC ID | HSW-934 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | HSW |
| Product Code | 934 |
| Applicant Business | Murata Electronics North America 🇺🇸 |
| Related Domains |  murata.com |
| Equipment Class | Frequency Hopping RF Modem |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.573-926.654 MHz | Class II permissive change or modification of presently authorized equipment | 2011-12-15 |
| 902.573-926.654 MHz | Class II permissive change or modification of presently authorized equipment | 2011-04-20 |
| 902.573-926.654 MHz | Original Equipment | 2007-08-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2011-12-15 | PDF 173.3 KB |
| manual | Users Manual | 2011-04-20 | PDF 77.5 KB |
| User Manual Rev 091907 | Users Manual | 2007-08-24 | PDF 80.5 KB |
| Users Manual | Users Manual | 2007-08-24 | PDF 76.2 KB |
| Internal Photos | Internal Photos | 2007-08-24 | PDF 1 MB |
| antenna photos | External Photos | 2011-04-20 | PDF 494.5 KB |
| External Photos | External Photos | 2007-08-24 | PDF 995.3 KB |
| Label and Location | ID Label/Location Info | 2007-08-24 | PDF 151.3 KB |
| Test Setup Photos | Test Setup Photos | 2011-12-15 | PDF 1.2 MB |
| test setup photos | Test Setup Photos | 2011-04-20 | PDF 2.7 MB |
| Test Setup Photos | Test Setup Photos | 2007-08-24 | PDF 1.4 MB |
| Test Report | Test Report | 2011-12-15 | PDF 60.2 KB |
| test report | Test Report | 2011-04-20 | PDF 406.9 KB |
| Test Report 1 | Test Report | 2007-08-24 | PDF 2.4 MB |
| Test Report 2 | Test Report | 2007-08-24 | PDF 1.4 MB |
| Test Report Corrected Pages | Test Report | 2007-08-24 | PDF 469.1 KB |
| Agency Agreement | Cover Letter(s) | 2011-12-15 | PDF 26.7 KB |
| Antenna Data Sheet | Cover Letter(s) | 2011-12-15 | PDF 769.6 KB |
| FCC Cover Letter | Cover Letter(s) | 2011-12-15 | PDF 17.2 KB |
| cover letter | Cover Letter(s) | 2011-04-20 | PDF 29.2 KB |
| Agency | Cover Letter(s) | 2007-08-24 | PDF 33.1 KB |
| Confidentiality Letter | Cover Letter(s) | 2007-08-24 | PDF 51 KB |
| FHSS Letter | Cover Letter(s) | 2007-08-24 | PDF 17.6 KB |
| Grant Change Letter 091907 | Cover Letter(s) | 2007-08-24 | PDF 16.8 KB |
| Modular Approval Letter | Cover Letter(s) | 2007-08-24 | PDF 17.4 KB |
| RF Exposure | RF Exposure Info | 2011-12-15 | PDF 34.3 KB |
| RF exposure | RF Exposure Info | 2011-04-20 | PDF 12.5 KB |
| RF Exposure Info | RF Exposure Info | 2007-08-24 | PDF 38.6 KB |
| RF Exposure MPE Rev 091907 | RF Exposure Info | 2007-08-24 | PDF 34.3 KB |
Application Information
| Application ID | pFd2mnEIFcPpJmGip3JsAA== |
|---|---|
| Final Action Date | 2011-12-15 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0024753089 |
| Model | -934 |
| Frequency Range | 902.573-926.654 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Frequency Hopping RF Modem |
| Responsible Party | Mark Tucker, Director of Hardware Engineering, mtucker@murata.com , 678 684-2009 |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc., swismer@acstestlab.com  , 770 831-8048 |
| Test Firm | Randy Abernathy, Advanced Compliance Solutions, Inc., rabernathy@acstestlab.com , 770-831-8048 |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval Power Output listed is conducted. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. For portable operation this device must transmit with a source-based time-averaging duty factor not exceeding 7.4%. For mobile operation the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Class II Change to add new antenna type as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| pFd2mnEIFcPpJmGip3JsAA== | 2011-12-15 | Class II permissive change or modification of presently authorized equipment |
| UJrYMCNSJMXB19PVDInHRw== | 2011-04-20 | Class II permissive change or modification of presently authorized equipment |
| 00wCqM78jPGkPBj1HQe+hA== | 2007-08-24 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.573-926.654 MHz | 0.2400000 | 15C |
Grants
TCB Grant - Application UJrYMCNSJMXB19PVDInHRw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/20/2011 Application Dated: 04/20/2011 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-934 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Frequency Hopping RF Modem |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.57342 - 926.654 | 0.24 |
| This permissive change application adds two new antennas as documented in the filing. Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. For portable operation this device must transmit with a source-based time-averaging duty factor not exceeding 7.4%. For mobile operation the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
EAS Grant - Application UJrYMCNSJMXB19PVDInHRw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 04/20/2011 Application Dated: 04/20/2011 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-934 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Frequency Hopping RF Modem |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.57342 - 926.654 | 0.24 |
| This permissive change application adds two new antennas as documented in the filing. Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. For portable operation this device must transmit with a source-based time-averaging duty factor not exceeding 7.4%. For mobile operation the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 12/15/2011 Application Dated: 12/15/2011 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-934 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Frequency Hopping RF Modem |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.57342 - 926.654 | 0.24 |
| Modular Approval Power Output listed is conducted. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. For portable operation this device must transmit with a source-based time-averaging duty factor not exceeding 7.4%. For mobile operation the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Class II Change to add new antenna type as described in this filing. |
EAS Grant - Application pFd2mnEIFcPpJmGip3JsAA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 12/15/2011 Application Dated: 12/15/2011 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-934 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Frequency Hopping RF Modem |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.57342 - 926.654 | 0.24 |
| Modular Approval Power Output listed is conducted. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. For portable operation this device must transmit with a source-based time-averaging duty factor not exceeding 7.4%. For mobile operation the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Class II Change to add new antenna type as described in this filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 | Date of Grant: 08/24/2007 Application Dated: 08/22/2007 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-934 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Frequency Hopping RF Modem |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.57342 - 926.654 | 0.24 |
| Modular Approval Power Output listed is conducted. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. For portable operation this device must transmit with a source-based time-averaging duty factor not exceeding 7.4%. For mobile operation the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. |
EAS Grant - Application 00wCqM78jPGkPBj1HQe+hA==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States | Date of Grant: 08/24/2007 Application Dated: 08/22/2007 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-934 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Frequency Hopping RF Modem |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.57342 - 926.654 | 0.24 |
| Modular Approval Power Output listed is conducted. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. For portable operation this device must transmit with a source-based time-averaging duty factor not exceeding 7.4%. For mobile operation the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
|
| Mail To: |
| EA750121 |