FCC ID HSW-CCT900
900 MHz Series Transceiver
by Murata Electronics North America
Grantee Code: HSW Product Code: CCT900
Latest application date: 2016-04-01
FCC ID Device Details
| FCC ID | HSW-CCT900 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | HSW |
| Product Code | CCT900 |
| Applicant Business | Murata Electronics North America 🇺🇸 |
| Related Domains |  murata.com |
| Equipment Class | 900 MHz Series Transceiver |
| Test Firm | TUV SUD America, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 903-927.079 MHz | Class II permissive change or modification of presently authorized equipment | 2016-04-01 |
| 903-927.079 MHz | Original Equipment | 2016-02-23 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2016-08-21 | PDF 1.8 MB |
| Internal Photos | Internal Photos | 2016-08-21 | PDF 647.2 KB |
| External Photos | External Photos | 2016-08-21 | PDF 2.7 MB |
| External Photos | External Photos | 2016-04-01 | PDF 221.4 KB |
| Label Information | ID Label/Location Info | 2016-04-01 | PDF 273.2 KB |
| Label Information | ID Label/Location Info | 2016-02-23 | PDF 164.5 KB |
| Test Setup Photos | Test Setup Photos | 2016-08-21 | PDF 2.8 MB |
| Test Report | Test Report | 2016-02-23 | PDF 1.3 MB |
| Agency Agreement | Cover Letter(s) | 2016-04-01 | PDF 10.4 KB |
| FCC Cover Letter | Cover Letter(s) | 2016-04-01 | PDF 71 KB |
| Confidentiality Request | Cover Letter(s) | 2016-02-23 | PDF 15.5 KB |
| FCC Cover Letter | Cover Letter(s) | 2016-02-23 | PDF 58.6 KB |
| Modular Approval Letter | Cover Letter(s) | 2016-02-23 | PDF 14.9 KB |
| SAR Report | RF Exposure Info | 2016-04-01 | PDF 2.1 MB |
| RF Exposure | RF Exposure Info | 2016-02-23 | PDF 91.8 KB |
| Block Diagram Metadata only | Block Diagram | PDF 66.8 KB | |
| Schematics Metadata only | Schematics | PDF 167.5 KB | |
| Theory of Operation Metadata only | Operational Description | PDF 87.7 KB |
Application Information
| Application ID | QFaoXr0HWmIyenwM9veWsw== |
|---|---|
| Final Action Date | 2016-04-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0024753089 |
| Model | CCT900 |
| Frequency Range | 903-927.079 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 900 MHz Series Transceiver |
| Responsible Party | Mark Tucker, Director of Hardware Engineering, mtucker@murata.com , 678 684-2009 |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc. |
| Test Firm | Sam Wismer, TUV SUD America, Inc., swismer@tuvam.com  , 678-341-5924 |
| TCB Email | jwoods@acstestlab.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power listed is average conducted. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons when using an antenna gain < / = 8 dBi and 30 cm when using an 8 dBi < antenna gain < / = 12 dBi as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Device must operate with a source-based, time-averaged duty cycle not to exceed 5.08% controlled via software or firmware. Class 2 Change to address RF Exposure in portable body-worn hosts as described in this filing. The highest reported SAR for body-worn accessory exposure conditions is <0.10 W/kg, |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| QFaoXr0HWmIyenwM9veWsw== | 2016-04-01 | Class II permissive change or modification of presently authorized equipment |
| FHkBA9PhLT6CRD3sD1QggA== | 2016-02-23 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 903-927.079 MHz | 0.1900000 | 15C |
Grants
TCB Grant - Application QFaoXr0HWmIyenwM9veWsw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 04/01/2016 Application Dated: 04/01/2016 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-CCT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | 900 MHz Series Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.0 - 927.079 | 0.19 |
| Modular Approval. Power listed is average conducted. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons when using an antenna gain < / = 8 dBi and 30 cm when using an 8 dBi < antenna gain < / = 12 dBi as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Device must operate with a source-based, time-averaged duty cycle not to exceed 5.08% controlled via software or firmware. Class 2 Change to address RF Exposure in portable body-worn hosts as described in this filing. The highest reported SAR for body-worn accessory exposure conditions is <0.10 W/kg, |
EAS Grant - Application QFaoXr0HWmIyenwM9veWsw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 04/01/2016 Application Dated: 04/01/2016 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-CCT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | 900 MHz Series Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.0 - 927.079 | 0.19 |
| Modular Approval. Power listed is average conducted. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons when using an antenna gain < / = 8 dBi and 30 cm when using an 8 dBi < antenna gain < / = 12 dBi as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Device must operate with a source-based, time-averaged duty cycle not to exceed 5.08% controlled via software or firmware. Class 2 Change to address RF Exposure in portable body-worn hosts as described in this filing. The highest reported SAR for body-worn accessory exposure conditions is <0.10 W/kg, |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 02/23/2016 Application Dated: 02/23/2016 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-CCT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | 900 MHz Series Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.0 - 927.079 | 0.19 |
| Modular Approval. Power listed is average conducted. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons when using an antenna gain < / = 8 dBi and 30 cm when using an 8 dBi < antenna gain < / = 12 dBi as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Device must operate with a source-based, time-averaged duty cycle not to exceed 5.08% controlled via software or firmware. |
EAS Grant - Application FHkBA9PhLT6CRD3sD1QggA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 02/23/2016 Application Dated: 02/23/2016 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-CCT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | 900 MHz Series Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.0 - 927.079 | 0.19 |
| Modular Approval. Power listed is average conducted. The transmitter must be installed to provide a separation distance of at least 20 cm from all persons when using an antenna gain < / = 8 dBi and 30 cm when using an 8 dBi < antenna gain < / = 12 dBi as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Device must operate with a source-based, time-averaged duty cycle not to exceed 5.08% controlled via software or firmware. |
| Mail To: |