FCC ID HSW-DNT2400P
2.4GHz Transceiver Module
by Murata Electronics North America
Grantee Code: HSW Product Code: DNT2400P
Latest application date: 2016-10-26
FCC ID Device Details
| FCC ID | HSW-DNT2400P |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | HSW |
| Product Code | DNT2400P |
| Applicant Business | Murata Electronics North America 🇺🇸 |
| Related Domains |  murata.com |
| Equipment Class | 2.4GHz Transceiver Module |
| Test Firm | TUV SUD America, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2409.33-2467.11 MHz | Class II permissive change or modification of presently authorized equipment | 2016-10-26 |
| 2409.33-2467.11 MHz | Original Equipment | 2011-04-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual 1 of 2 | Users Manual | 2016-10-26 | PDF 3.8 MB |
| Manual 2 of 2 | Users Manual | 2016-10-26 | PDF 4.2 MB |
| Manual | Users Manual | 2011-04-14 | PDF 1.9 MB |
| Internal Photos | Internal Photos | 2016-10-26 | PDF 250.7 KB |
| Internal Photos | Internal Photos | 2011-04-14 | PDF 1.4 MB |
| External Photos | External Photos | 2016-10-26 | PDF 222.8 KB |
| External Photos | External Photos | 2011-04-14 | PDF 656.3 KB |
| Label Information | ID Label/Location Info | 2011-04-14 | PDF 657.9 KB |
| Test Setup Photos | Test Setup Photos | 2016-10-26 | PDF 855.1 KB |
| Test Setup Photos | Test Setup Photos | 2011-04-14 | PDF 1.2 MB |
| Test Report | Test Report | 2016-10-26 | PDF 526.1 KB |
| Test Report | Test Report | 2011-04-14 | PDF 860.2 KB |
| Agency Agreement | Cover Letter(s) | 2016-10-26 | PDF 10.4 KB |
| Confidentiality Request | Cover Letter(s) | 2016-10-26 | PDF 13 KB |
| FCC Cover Letter | Cover Letter(s) | 2016-10-26 | PDF 56.1 KB |
| Agency Agreement | Cover Letter(s) | 2011-04-14 | PDF 25.5 KB |
| Confidentiality Request | Cover Letter(s) | 2011-04-14 | PDF 17.7 KB |
| FCC Cover Letter | Cover Letter(s) | 2011-04-14 | PDF 17.4 KB |
| Modular Approval Letter | Cover Letter(s) | 2011-04-14 | PDF 30.5 KB |
| RF Exposure | RF Exposure Info | 2016-10-26 | PDF 124.8 KB |
| RF Exposure | RF Exposure Info | 2011-04-14 | PDF 59.9 KB |
| Block Diagram Metadata only | Block Diagram | PDF 104.8 KB | |
| Schematics Metadata only | Schematics | PDF 142.1 KB | |
| Theory of Operation Metadata only | Operational Description | PDF 83.5 KB |
Application Information
| Application ID | yDEAUc6AIIz6qRGST9ZBFw== |
|---|---|
| Final Action Date | 2016-10-26 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0024753089 |
| Model | DNT2400P |
| Frequency Range | 2409.33-2467.11 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 2.4GHz Transceiver Module |
| Responsible Party | Mark Tucker, Director of Hardware Engineering, mtucker@murata.com , 678 684-2009 |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc. |
| Test Firm | Sam Wismer, TUV SUD America, Inc., swismer@tuvam.com  , 678-341-5924 |
| TCB Email | jwoods@acstestlab.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 28.8%, controlled by firmware and software. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Mobile products operating with this module are required to provide a minimum separation distance of at least 20 cm between the antenna and all persons during normal operation. Portable products operating with this module are limited to a source-based time-averaged duty cycle not to exceed 15.2% and an antenna gain of less than 3.47 dBi as described in this filing. A separate approval is required for all other portable configurations with respect to 2.1093 and different antenna configurations. Class II Change as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| yDEAUc6AIIz6qRGST9ZBFw== | 2016-10-26 | Class II permissive change or modification of presently authorized equipment |
| 6f6LVmoq/Dmw4ZeLKH+zXg== | 2011-04-14 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2409.33-2467.11 MHz | 0.0580000 | 15C |
Grants
TCB Grant - Application yDEAUc6AIIz6qRGST9ZBFw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 10/26/2016 Application Dated: 10/26/2016 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT2400P |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2.4GHz Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2409.33 - 2467.11 | 0.058 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 28.8%, controlled by firmware and software. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Mobile products operating with this module are required to provide a minimum separation distance of at least 20 cm between the antenna and all persons during normal operation. Portable products operating with this module are limited to a source-based time-averaged duty cycle not to exceed 15.2% and an antenna gain of less than 3.47 dBi as described in this filing. A separate approval is required for all other portable configurations with respect to 2.1093 and different antenna configurations. Class II Change as described in this filing. |
EAS Grant - Application yDEAUc6AIIz6qRGST9ZBFw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 10/26/2016 Application Dated: 10/26/2016 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT2400P |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2.4GHz Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2409.33 - 2467.11 | 0.058 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 28.8%, controlled by firmware and software. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Mobile products operating with this module are required to provide a minimum separation distance of at least 20 cm between the antenna and all persons during normal operation. Portable products operating with this module are limited to a source-based time-averaged duty cycle not to exceed 15.2% and an antenna gain of less than 3.47 dBi as described in this filing. A separate approval is required for all other portable configurations with respect to 2.1093 and different antenna configurations. Class II Change as described in this filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 04/14/2011 Application Dated: 04/14/2011 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT2400P |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2.4GHz Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2409.33 - 2467.11 | 0.058 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 28.8%, controlled by firmware and software. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Mobile products operating with this module are required to provide a minimum separation distance of at least 20 cm between the antenna and all persons during normal operation. Portable products operating with this module are limited to a source-based time-averaged duty cycle not to exceed 15.2% and an antenna gain of less than 3.47 dBi as described in this filing. A separate approval is required for all other portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application 6f6LVmoq/Dmw4ZeLKH+zXg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 04/14/2011 Application Dated: 04/14/2011 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT2400P |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2.4GHz Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2409.33 - 2467.11 | 0.058 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 28.8%, controlled by firmware and software. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Mobile products operating with this module are required to provide a minimum separation distance of at least 20 cm between the antenna and all persons during normal operation. Portable products operating with this module are limited to a source-based time-averaged duty cycle not to exceed 15.2% and an antenna gain of less than 3.47 dBi as described in this filing. A separate approval is required for all other portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: |