FCC ID HSW-DNT500P
Modular 900 MHz Transceiver
by Murata Electronics North America
Grantee Code: HSW Product Code: DNT500P
Latest application date: 2008-09-23
FCC ID Device Details
| FCC ID | HSW-DNT500P |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | HSW |
| Product Code | DNT500P |
| Applicant Business | Murata Electronics North America 🇺🇸 |
| Related Domains |  murata.com |
| Equipment Class | Modular 900 MHz Transceiver |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 903.25-926.25 MHz | Class II permissive change or modification of presently authorized equipment | 2008-09-23 |
| 902.75-927.25 MHz | Class II permissive change or modification of presently authorized equipment | 2008-09-23 |
| 903.25-926.25 MHz | Original Equipment | 2008-07-18 |
| 902.75-927.25 MHz | Original Equipment | 2008-07-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| part 1 user manual | Users Manual | 2008-07-18 | PDF 1.1 MB |
| part 2 user manual | Users Manual | 2008-07-18 | PDF 2.1 MB |
| part 3 user manual | Users Manual | 2008-07-18 | PDF 1.6 MB |
| user manual part 1 | Users Manual | 2008-07-18 | PDF 1.1 MB |
| user manual part 2 | Users Manual | 2008-07-18 | PDF 2.1 MB |
| user manual part 3 | Users Manual | 2008-07-18 | PDF 1.6 MB |
| internal photos | Internal Photos | 2008-07-18 | PDF 1.3 MB |
| External Photos | External Photos | 2008-09-23 | PDF 407.8 KB |
| external photos | External Photos | 2008-07-18 | PDF 1.9 MB |
| label and location | ID Label/Location Info | 2008-07-18 | PDF 662.8 KB |
| block diagram | Block Diagram | 2008-07-18 | PDF 584.3 KB |
| Test Setup Photos | Test Setup Photos | 2008-09-23 | PDF 144.4 KB |
| test setup photos | Test Setup Photos | 2008-07-18 | PDF 1.5 MB |
| Test Report | Test Report | 2008-09-23 | PDF 69.1 KB |
| Test Report | Test Report | 2008-09-23 | PDF 74.2 KB |
| test report | Test Report | 2008-07-18 | PDF 377.8 KB |
| test report | Test Report | 2008-07-18 | PDF 495.7 KB |
| Agency Agreement | Cover Letter(s) | 2008-09-23 | PDF 26.6 KB |
| Cover Letter | Cover Letter(s) | 2008-09-23 | PDF 18 KB |
| agent letter | Cover Letter(s) | 2008-07-18 | PDF 29.2 KB |
| confidential letter | Cover Letter(s) | 2008-07-18 | PDF 34.5 KB |
| modular letter | Cover Letter(s) | 2008-07-18 | PDF 38.9 KB |
| RF Exposure | RF Exposure Info | 2008-09-23 | PDF 30.8 KB |
| MPE calculation | RF Exposure Info | 2008-07-18 | PDF 23.7 KB |
| antenna information | Parts List/Tune Up Info | 2008-07-18 | PDF 41.4 KB |
| antenna sheet | Parts List/Tune Up Info | 2008-07-18 | PDF 41.4 KB |
Application Information
| Application ID | XiZB8lzR0jTAd/ymIYi++A== |
|---|---|
| Final Action Date | 2008-09-23 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0024753089 |
| Model | -DNT500P |
| Frequency Range | 903.25-926.25 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Modular 900 MHz Transceiver |
| Responsible Party | Mark Tucker, Director of Hardware Engineering, mtucker@murata.com , 678 684-2009 |
| Test Firm | Sam Wismer, Advanced Compliance Solutions, Inc., swismer@acstestlab.com  , 770-831-8048 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| XiZB8lzR0jTAd/ymIYi++A== | 2008-09-23 | Class II permissive change or modification of presently authorized equipment |
| Qfd53sb4y3HcDx1j45mggA== | 2008-09-23 | Class II permissive change or modification of presently authorized equipment |
| OIuxXFsSEoTjqawVzYQImQ== | 2008-07-18 | Original Equipment |
| 1QmR5QVnoUac1N6SKIo4kQ== | 2008-07-18 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application XiZB8lzR0jTAd/ymIYi++A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 09/23/2008 Application Dated: 09/23/2008 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT500P |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | Modular 900 MHz Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 903.25 - 926.25 | 0.085 |
| Modular approval. Power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Single Modular |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application XiZB8lzR0jTAd/ymIYi++A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 09/23/2008 Application Dated: 09/23/2008 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT500P |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | Modular 900 MHz Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 903.25 - 926.25 | 0.085 |
| Modular approval. Power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Single Modular |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 09/23/2008 Application Dated: 09/23/2008 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT500P |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Modular 900 MHz Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.75 - 927.25 | 0.585 |
| Modular approval. Power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Single Modular |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Qfd53sb4y3HcDx1j45mggA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 09/23/2008 Application Dated: 09/23/2008 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT500P |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Modular 900 MHz Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.75 - 927.25 | 0.585 |
| Modular approval. Power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Single Modular |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko Canada Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 07/18/2008 Application Dated: 07/18/2008 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT500P |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | DNT500 900 MHz Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 903.25 - 926.25 | 0.085 |
| Modular approval. Power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Single Modular |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application OIuxXFsSEoTjqawVzYQImQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 07/18/2008 Application Dated: 07/18/2008 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT500P |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | DNT500 900 MHz Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 903.25 - 926.25 | 0.085 |
| Modular approval. Power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Single Modular |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko Canada Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 07/18/2008 Application Dated: 07/18/2008 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT500P |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | DNT500 900 MHz Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.75 - 927.25 | 0.585 |
| Modular approval. Power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Single Modular |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 1QmR5QVnoUac1N6SKIo4kQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 07/18/2008 Application Dated: 07/18/2008 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT500P |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | DNT500 900 MHz Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.75 - 927.25 | 0.585 |
| Modular approval. Power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
| Single Modular |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |