FCC ID HSW-DNT90
Spread Spectrum Wireless Transceiver
by Murata Electronics North America
Grantee Code: HSW Product Code: DNT90
Latest application date: 2014-12-29
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.76-927.24 MHz | Class II permissive change or modification of presently authorized equipment | 2014-12-29 |
| 902.27-927.24 MHz | Class II permissive change or modification of presently authorized equipment | 2012-06-06 |
| 902.76-927.24 MHz | Class II permissive change or modification of presently authorized equipment | 2011-02-28 |
| 902.76-927.24 MHz | Original Equipment | 2010-11-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| manual pt a | Users Manual | 2012-06-06 | PDF 1.2 MB |
| manual pt b | Users Manual | 2012-06-06 | PDF 4.3 MB |
| Manual | Users Manual | 2010-11-08 | PDF 2.3 MB |
| internal photos | Internal Photos | 2014-12-29 | PDF 94.6 KB |
| internal photos | Internal Photos | 2012-06-06 | PDF 551 KB |
| internal photos | Internal Photos | 2011-02-28 | PDF 80.5 KB |
| Internal Photos | Internal Photos | 2010-11-08 | PDF 602.8 KB |
| external photos | External Photos | 2014-12-29 | PDF 132.9 KB |
| external photos | External Photos | 2012-06-06 | PDF 407.1 KB |
| External Photos | External Photos | 2010-11-08 | PDF 262.3 KB |
| Label Information | ID Label/Location Info | 2010-11-08 | PDF 514.2 KB |
| duty cycle info | Schematics | 2011-02-28 | PDF 5.8 KB |
| test setup photos | Test Setup Photos | 2014-12-29 | PDF 972.5 KB |
| test setup photos | Test Setup Photos | 2012-06-06 | PDF 332.3 KB |
| test setup photos | Test Setup Photos | 2011-02-28 | PDF 415 KB |
| Test Setup Photos | Test Setup Photos | 2010-11-08 | PDF 1.1 MB |
| test report | Test Report | 2014-12-29 | PDF 694.1 KB |
| duty cycle factor calculations | Test Report | 2012-06-06 | PDF 5.8 KB |
| test report | Test Report | 2012-06-06 | PDF 429.8 KB |
| test report | Test Report | 2011-02-28 | PDF 623.9 KB |
| Test Report | Test Report | 2010-11-08 | PDF 413.8 KB |
| Class 2 permissive change letter | Cover Letter(s) | 2014-12-29 | PDF 35.9 KB |
| FCC KDB permission to file | Cover Letter(s) | 2014-12-29 | PDF 83.7 KB |
| agent letter | Cover Letter(s) | 2014-12-29 | PDF 62.3 KB |
| confidentiality request letter | Cover Letter(s) | 2014-12-29 | PDF 59.4 KB |
| agent letter | Cover Letter(s) | 2012-06-06 | PDF 1.5 MB |
| confidentiality request letter | Cover Letter(s) | 2012-06-06 | PDF 19.1 KB |
| cover letter on permissive changes | Cover Letter(s) | 2012-06-06 | PDF 49.2 KB |
| modular approval request letter | Cover Letter(s) | 2012-06-06 | PDF 36.3 KB |
| confidentiality request letter | Cover Letter(s) | 2011-02-28 | PDF 23 KB |
| description of changes | Cover Letter(s) | 2011-02-28 | PDF 29.3 KB |
| Agency Agreement Letter | Cover Letter(s) | 2010-11-08 | PDF 26.8 KB |
| Confidentiality Request | Cover Letter(s) | 2010-11-08 | PDF 21.6 KB |
| FCC Cover Letter | Cover Letter(s) | 2010-11-08 | PDF 17.2 KB |
| Modular Approval Letter | Cover Letter(s) | 2010-11-08 | PDF 30.5 KB |
| MPE info | RF Exposure Info | 2014-12-29 | PDF 23.6 KB |
| MPE info | RF Exposure Info | 2012-06-06 | PDF 22.1 KB |
| RF Exposure | RF Exposure Info | 2010-11-08 | PDF 25.5 KB |
| block diagram Metadata only | Block Diagram | PDF 6.8 KB | |
| schematics Metadata only | Schematics | PDF 34.1 KB | |
| operational description Metadata only | Operational Description | PDF 17.6 KB |
Application Information
| Application ID | rupDXH8M70Roygj3iVvsCg== |
|---|---|
| Final Action Date | 2014-12-29 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0024753089 |
| Model | DNT90 |
| Frequency Range | 902.76-927.24 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Spread Spectrum Wireless Transceiver |
| Responsible Party | Mark Tucker, Director of Hardware Engineering, mtucker@murata.com  , 678 684-2009 |
| Agent | Sandi Sandi Sandi, US Tech, smcenery@ustech-lab.com  , 770-740-0717 |
| Technical Contact | George Yang, US Tech, gyang@ustech-lab.com , 770-740-0717 |
| Test Firm | George Yang, US Tech, gyang@ustech-lab.com , 770-740-0717 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | This permissive change alters the internal circuit components as documented in this filing. The second permissive change allows an on-board antenna as documented in that filing. The first permissive change allows changes to the internal circuit components as documented in that filing. Modular Approval. Power output listed is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in this filing. The module must transmit with a duty factor not exceeding 10.4%, controlled by firmware and software in the module. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| rupDXH8M70Roygj3iVvsCg== | 2014-12-29 | Class II permissive change or modification of presently authorized equipment |
| YWMt1v3RMyM7/oaSjgxuSA== | 2012-06-06 | Class II permissive change or modification of presently authorized equipment |
| Tj06ePR4nwJGttN6kcF2dg== | 2011-02-28 | Class II permissive change or modification of presently authorized equipment |
| Njuq3EjmRxu8sef0B9tMGA== | 2010-11-08 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application YWMt1v3RMyM7/oaSjgxuSA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/06/2012 Application Dated: 06/05/2012 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT90 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.27 - 927.24 | 0.15 |
| This Permissive Change allows an on-board antenna as documented in the filing. A previous permissive change allows changes to the internal circuit components as documented in that filing. Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the original filing. The module must transmit with a duty factor not exceeding 10.4%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 20 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application YWMt1v3RMyM7/oaSjgxuSA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 06/06/2012 Application Dated: 06/05/2012 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT90 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.27 - 927.24 | 0.15 |
| This Permissive Change allows an on-board antenna as documented in the filing. A previous permissive change allows changes to the internal circuit components as documented in that filing. Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the original filing. The module must transmit with a duty factor not exceeding 10.4%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 20 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/28/2011 Application Dated: 02/25/2011 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT90 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900 MHz Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.76 - 927.24 | 0.15 |
| This Permissive Change allows changes to the internal circuit components as documented in the filing. Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. The module must transmit with a duty factor not exceeding 10.4%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 20 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application Tj06ePR4nwJGttN6kcF2dg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 02/28/2011 Application Dated: 02/25/2011 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT90 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900 MHz Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.76 - 927.24 | 0.15 |
| This Permissive Change allows changes to the internal circuit components as documented in the filing. Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. The module must transmit with a duty factor not exceeding 10.4%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 20 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/29/2014 Application Dated: 12/23/2014 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT90 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.76 - 927.24 | 0.15 |
| This permissive change alters the internal circuit components as documented in this filing. The second permissive change allows an on-board antenna as documented in that filing. The first permissive change allows changes to the internal circuit components as documented in that filing. Modular Approval. Power output listed is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in this filing. The module must transmit with a duty factor not exceeding 10.4%, controlled by firmware and software in the module. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application rupDXH8M70Roygj3iVvsCg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 12/29/2014 Application Dated: 12/23/2014 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT90 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.76 - 927.24 | 0.15 |
| This permissive change alters the internal circuit components as documented in this filing. The second permissive change allows an on-board antenna as documented in that filing. The first permissive change allows changes to the internal circuit components as documented in that filing. Modular Approval. Power output listed is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in this filing. The module must transmit with a duty factor not exceeding 10.4%, controlled by firmware and software in the module. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 11/08/2010 Application Dated: 11/08/2010 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT90 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900MHz Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.76 - 927.24 | 0.15 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. The module must transmit with a duty factor not exceeding 10.4%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 20 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application Njuq3EjmRxu8sef0B9tMGA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 11/08/2010 Application Dated: 11/08/2010 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT90 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900MHz Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.76 - 927.24 | 0.15 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. The module must transmit with a duty factor not exceeding 10.4%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 20 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: |