FCC ID HSW-DNT900
900 MHz Spread Spectrum Wireless Transceiver
by Murata Electronics North America
Grantee Code: HSW Product Code: DNT900
Latest application date: 2012-08-27
FCC ID Device Details
| FCC ID | HSW-DNT900 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | HSW |
| Product Code | DNT900 |
| Applicant Business | Murata Electronics North America 🇺🇸 |
| Related Domains |  murata.com |
| Equipment Class | 900 MHz Spread Spectrum Wireless Transceiver |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.75-927.25 MHz | Class II permissive change or modification of presently authorized equipment | 2012-08-27 |
| 903.25-926.25 MHz | Class II permissive change or modification of presently authorized equipment | 2012-08-27 |
| 903.25-926.25 MHz | Class II permissive change or modification of presently authorized equipment | 2011-04-05 |
| 902.75-927.25 MHz | Class II permissive change or modification of presently authorized equipment | 2011-04-05 |
| 903.25-926.25 MHz | Original Equipment | 2008-12-31 |
| 902.25-927.25 MHz | Original Equipment | 2008-12-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2011-04-05 | PDF 2.1 MB |
| Manual | Users Manual | 2008-12-31 | PDF 2.1 MB |
| Internal Photos | Internal Photos | 2011-04-05 | PDF 143.8 KB |
| Internal Photos | Internal Photos | 2011-04-05 | PDF 143.8 KB |
| Internal Photos | Internal Photos | 2008-12-31 | PDF 257.5 KB |
| External Photos | External Photos | 2012-08-27 | PDF 174.9 KB |
| External Photos | External Photos | 2011-04-05 | PDF 290.6 KB |
| External Photos | External Photos | 2011-04-05 | PDF 290.6 KB |
| External Photos | External Photos | 2008-12-31 | PDF 18.3 KB |
| Label and Location | ID Label/Location Info | 2011-04-05 | PDF 79.4 KB |
| Label and Location | ID Label/Location Info | 2011-04-05 | PDF 79.4 KB |
| Label Information | ID Label/Location Info | 2008-12-31 | PDF 159.2 KB |
| Test Setup Photos | Test Setup Photos | 2012-08-27 | PDF 167 KB |
| Test Setup Photos | Test Setup Photos | 2011-04-05 | PDF 2.7 MB |
| Test Setup Photos | Test Setup Photos | 2011-04-05 | PDF 2.7 MB |
| Test Setup Photos | Test Setup Photos | 2008-12-31 | PDF 595.8 KB |
| Test Report | Test Report | 2012-08-27 | PDF 103.1 KB |
| Test Report | Test Report | 2012-08-27 | PDF 89.4 KB |
| Test Report | Test Report | 2011-04-05 | PDF 2.1 MB |
| Test Report | Test Report | 2011-04-05 | PDF 2.1 MB |
| Test Report | Test Report | 2008-12-31 | PDF 371.8 KB |
| Test Report DTS | Test Report | 2008-12-31 | PDF 359.6 KB |
| Agency Agreement | Cover Letter(s) | 2012-08-27 | PDF 11.5 KB |
| FCC Cover Letter | Cover Letter(s) | 2012-08-27 | PDF 39.3 KB |
| Authorization Letter | Cover Letter(s) | 2011-04-05 | PDF 1.5 MB |
| Confidentiality Letter | Cover Letter(s) | 2011-04-05 | PDF 21.1 KB |
| Confidentiality Letter | Cover Letter(s) | 2011-04-05 | PDF 21.1 KB |
| Cover Letter | Cover Letter(s) | 2011-04-05 | PDF 31.3 KB |
| Permissive Change Letter | Cover Letter(s) | 2011-04-05 | PDF 31.5 KB |
| Agency Agreement | Cover Letter(s) | 2008-12-31 | PDF 26.6 KB |
| Confidentiality Request | Cover Letter(s) | 2008-12-31 | PDF 37.5 KB |
| Cover Letter | Cover Letter(s) | 2008-12-31 | PDF 18.2 KB |
| Modular Approval Letter | Cover Letter(s) | 2008-12-31 | PDF 30.4 KB |
| RF Exposure | RF Exposure Info | 2012-08-27 | PDF 30.4 KB |
| RF Exposure MPE | RF Exposure Info | 2011-04-05 | PDF 23.2 KB |
| RF Exposure MPE | RF Exposure Info | 2011-04-05 | PDF 23.1 KB |
| RF Exposure | RF Exposure Info | 2008-12-31 | PDF 30.1 KB |
Application Information
| Application ID | ewSzvpyDqaLwgRVAmt6Aqw== |
|---|---|
| Final Action Date | 2012-08-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0024753089 |
| Model | -DNT900 |
| Frequency Range | 902.75-927.25 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 900 MHz Spread Spectrum Wireless Transceiver |
| Responsible Party | Mark Tucker, Director of Hardware Engineering, mtucker@murata.com , 678 684-2009 |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc |
| Test Firm | Randy Abernathy, Advanced Compliance Solutions, Inc., rabernathy@acstestlab.com  , 770-831-8048 |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 28.75%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Change to add new antenna type as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ewSzvpyDqaLwgRVAmt6Aqw== | 2012-08-27 | Class II permissive change or modification of presently authorized equipment |
| HWC0puMJwPMWkT1n5GfdGw== | 2012-08-27 | Class II permissive change or modification of presently authorized equipment |
| tAm/s1CoWETCZ2inpuxVGw== | 2011-04-05 | Class II permissive change or modification of presently authorized equipment |
| mPspefTUKnFlI0MmtA8vbA== | 2011-04-05 | Class II permissive change or modification of presently authorized equipment |
| Zc90WHlIXQzjreHNwtI+BA== | 2008-12-31 | Original Equipment |
| DYkMvUg2fQsdb22XSrWmjQ== | 2008-12-31 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application Zc90WHlIXQzjreHNwtI+BA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 12/31/2008 Application Dated: 12/31/2008 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | 900 MHz Spread Spectrum Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.25 - 926.25 | 0.057 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application Zc90WHlIXQzjreHNwtI+BA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 12/31/2008 Application Dated: 12/31/2008 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | 900 MHz Spread Spectrum Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.25 - 926.25 | 0.057 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/05/2011 Application Dated: 04/04/2011 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | 900 MHz Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 903.25 - 926.25 | 0.057 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application tAm/s1CoWETCZ2inpuxVGw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 04/05/2011 Application Dated: 04/04/2011 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | 900 MHz Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 903.25 - 926.25 | 0.057 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/05/2011 Application Dated: 04/04/2011 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900 MHz Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.75 - 927.25 | 0.938 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 28.75%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application mPspefTUKnFlI0MmtA8vbA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 04/05/2011 Application Dated: 04/04/2011 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900 MHz Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.75 - 927.25 | 0.938 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 28.75%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 08/27/2012 Application Dated: 08/27/2012 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | 900 MHz Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.25 - 926.25 | 0.057 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Change to add new antenna type as described in this filing. |
EAS Grant - Application HWC0puMJwPMWkT1n5GfdGw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 08/27/2012 Application Dated: 08/27/2012 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | 900 MHz Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.25 - 926.25 | 0.057 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Change to add new antenna type as described in this filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 08/27/2012 Application Dated: 08/27/2012 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900 MHz Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.938 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 28.75%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Change to add new antenna type as described in this filing. |
EAS Grant - Application ewSzvpyDqaLwgRVAmt6Aqw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 08/27/2012 Application Dated: 08/27/2012 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900 MHz Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.938 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 28.75%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Change to add new antenna type as described in this filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 12/31/2008 Application Dated: 12/31/2008 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900 MHz Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.25 - 927.25 | 0.938 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 28.75%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application DYkMvUg2fQsdb22XSrWmjQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 12/31/2008 Application Dated: 12/31/2008 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900 MHz Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.25 - 927.25 | 0.938 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 28.75%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: |