FCC ID HSW-DNT900
HSWDNT900, HSW DNT900, HSW-DNT900, HSW-DNT9OO, H5W-DNT900
Murata Electronics North America 900 MHz Spread Spectrum Wireless Transceiver DNT900
An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product.
For example, the grantee code for FCC ID: HSW-DNT900 is HSW. The remaining characters of the FCC ID, -DNT900, are often associated with the product model, but they can be random. These letters are chosen by the applicant.
In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.
Purchase on Amazon:
900 MHz Spread Spectrum Wireless Transceiver
- Application: 900 MHz Spread Spectrum Wireless Transceiver
- Equipment Class: DSS - Part 15 Spread Spectrum Transmitter
- Short Link: fcc.id/HSW-DNT900
- Sources: FCC.gov | FCC.report
- Registered By: Murata Electronics North America - HSW (United States)
| App # | Purpose | Date | Unique ID |
|---|---|---|---|
| 1 | Original Equipment | 2008-12-31 | DYkMvUg2fQsdb22XSrWmjQ== |
| 2 | Original Equipment | 2008-12-31 | Zc90WHlIXQzjreHNwtI+BA== |
| 3 | Class II Permissive Change | 2011-04-05 | mPspefTUKnFlI0MmtA8vbA== |
| 4 | Class II Permissive Change | 2011-04-05 | tAm/s1CoWETCZ2inpuxVGw== |
| 5 | Class II Permissive Change | 2012-08-27 | ewSzvpyDqaLwgRVAmt6Aqw== |
| 6 | Class II Permissive Change | 2012-08-27 | HWC0puMJwPMWkT1n5GfdGw== |
Operating Frequencies
| Frequency Range | Power Output | Rule Parts | Grant Notes | App # |
|---|---|---|---|---|
| 902.25-927.25 MHz | 938 mW | 15C | 1.1 | |
| 902.75-927.25 MHz | 938 mW | 15C | 5.1 | |
| 902.75-927.25 MHz | 938 mW | 15C | CC | 3.1 |
| 903.25-926.25 MHz | 57 mW | 15C | 6.1 | |
| 903.25-926.25 MHz | 57 mW | 15C | CC | 4.1 |
| 903.25-926.25 MHz | 57 mW | 15C | 2.1 |
Exhibits
Available Exhibits
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 6 | Test Report | Test Report Adobe Acrobat PDF (89 kB) |
2012-08-27 2012-08-27 |
| 6 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (167 kB) |
2012-08-27 2012-08-27 |
| 6 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (30 kB) |
2012-08-27 2012-08-27 |
| 6 | FCC Cover Letter | Cover Letter(s) Adobe Acrobat PDF (39 kB) |
2012-08-27 2012-08-27 |
| 6 | Agency Agreement | Cover Letter(s) Adobe Acrobat PDF (11 kB) |
2012-08-27 2012-08-27 |
| 6 | External Photos | External Photos Adobe Acrobat PDF (174 kB) |
2012-08-27 2012-08-27 |
| 5 | Test Report | Test Report Adobe Acrobat PDF (103 kB) |
2012-08-27 2012-08-27 |
| 5 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (167 kB) |
2012-08-27 2012-08-27 |
| 5 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (30 kB) |
2012-08-27 2012-08-27 |
| 5 | FCC Cover Letter | Cover Letter(s) Adobe Acrobat PDF (39 kB) |
2012-08-27 2012-08-27 |
| 5 | Agency Agreement | Cover Letter(s) Adobe Acrobat PDF (11 kB) |
2012-08-27 2012-08-27 |
| 5 | External Photos | External Photos Adobe Acrobat PDF (174 kB) |
2012-08-27 2012-08-27 |
| 4 | User Manual | Users Manual Adobe Acrobat PDF (2156 kB) |
2011-04-04 2011-04-05 |
| 4 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (2739 kB) |
2011-04-04 2011-04-05 |
| 4 | Test Report | Test Report Adobe Acrobat PDF (2125 kB) |
2011-04-04 2011-04-05 |
| 4 | RF Exposure MPE | RF Exposure Info Adobe Acrobat PDF (23 kB) |
2011-04-04 2011-04-05 |
| 4 | Label and Location | ID Label/Location Info Adobe Acrobat PDF (79 kB) |
2011-04-04 2011-04-05 |
| 4 | Internal Photos | Internal Photos Adobe Acrobat PDF (143 kB) |
2011-04-04 2011-04-05 |
| 4 | External Photos | External Photos Adobe Acrobat PDF (290 kB) |
2011-04-04 2011-04-05 |
| 4 | Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (21 kB) |
2011-04-04 2011-04-05 |
| 4 | Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (1509 kB) |
2011-04-04 2011-04-05 |
| 4 | Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (31 kB) |
2011-04-04 2011-04-05 |
| 3 | User Manual | Users Manual Adobe Acrobat PDF (2156 kB) |
2011-04-04 2011-04-05 |
| 3 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (2739 kB) |
2011-04-04 2011-04-05 |
| 3 | Test Report | Test Report Adobe Acrobat PDF (2116 kB) |
2011-04-04 2011-04-05 |
| 3 | RF Exposure MPE | RF Exposure Info Adobe Acrobat PDF (23 kB) |
2011-04-04 2011-04-05 |
| 3 | Label and Location | ID Label/Location Info Adobe Acrobat PDF (79 kB) |
2011-04-04 2011-04-05 |
| 3 | Internal Photos | Internal Photos Adobe Acrobat PDF (143 kB) |
2011-04-04 2011-04-05 |
| 3 | External Photos | External Photos Adobe Acrobat PDF (290 kB) |
2011-04-04 2011-04-05 |
| 3 | Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (21 kB) |
2011-04-04 2011-04-05 |
| 3 | Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (1509 kB) |
2011-04-04 2011-04-05 |
| 3 | Cover Letter | Cover Letter(s) Adobe Acrobat PDF (31 kB) |
2011-04-04 2011-04-05 |
| 2 | Manual | Users Manual Adobe Acrobat PDF (2156 kB) |
2008-12-31 2008-12-31 |
| 2 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (595 kB) |
2008-12-31 2008-12-31 |
| 2 | Test Report DTS | Test Report Adobe Acrobat PDF (359 kB) |
2008-12-31 2008-12-31 |
| 2 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (30 kB) |
2008-12-31 2008-12-31 |
| 2 | Internal Photos | Internal Photos Adobe Acrobat PDF (257 kB) |
2008-12-31 2008-12-31 |
| 2 | Label Information | ID Label/Location Info Adobe Acrobat PDF (159 kB) |
2008-12-31 2008-12-31 |
| 2 | External Photos | External Photos Adobe Acrobat PDF (18 kB) |
2008-12-31 2008-12-31 |
| 2 | Modular Approval Letter | Cover Letter(s) Adobe Acrobat PDF (30 kB) |
2008-12-31 2008-12-31 |
| 2 | Confidentiality Request | Cover Letter(s) Adobe Acrobat PDF (37 kB) |
2008-12-31 2008-12-31 |
| 2 | Cover Letter | Cover Letter(s) Adobe Acrobat PDF (18 kB) |
2008-12-31 2008-12-31 |
| 2 | Agency Agreement | Cover Letter(s) Adobe Acrobat PDF (26 kB) |
2008-12-31 2008-12-31 |
| 1 | Cover Letter | Cover Letter(s) Adobe Acrobat PDF (18 kB) |
2008-12-31 2008-12-31 |
| 1 | Agency Agreement | Cover Letter(s) Adobe Acrobat PDF (26 kB) |
2008-12-31 2008-12-31 |
| 1 | Manual | Users Manual Adobe Acrobat PDF (2156 kB) |
2008-12-31 2008-12-31 |
| 1 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (595 kB) |
2008-12-31 2008-12-31 |
| 1 | Test Report | Test Report Adobe Acrobat PDF (371 kB) |
2008-12-31 2008-12-31 |
| 1 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (30 kB) |
2008-12-31 2008-12-31 |
| 1 | Internal Photos | Internal Photos Adobe Acrobat PDF (257 kB) |
2008-12-31 2008-12-31 |
| 1 | Label Information | ID Label/Location Info Adobe Acrobat PDF (159 kB) |
2008-12-31 2008-12-31 |
| 1 | External Photos | External Photos Adobe Acrobat PDF (18 kB) |
2008-12-31 2008-12-31 |
| 1 | Confidentiality Request | Cover Letter(s) Adobe Acrobat PDF (37 kB) |
2008-12-31 2008-12-31 |
| 1 | Modular Approval Letter | Cover Letter(s) Adobe Acrobat PDF (30 kB) |
2008-12-31 2008-12-31 |
APP # 6 (2012-08-27)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 6 | Test Report | Test Report Adobe Acrobat PDF (89 kB) |
2012-08-27 00:00:00 2012-08-27 00:00:00 |
| 6 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (167 kB) |
2012-08-27 00:00:00 2012-08-27 00:00:00 |
| 6 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (30 kB) |
2012-08-27 00:00:00 2012-08-27 00:00:00 |
| 6 | FCC Cover Letter | Cover Letter(s) Adobe Acrobat PDF (39 kB) |
2012-08-27 00:00:00 2012-08-27 00:00:00 |
| 6 | Agency Agreement | Cover Letter(s) Adobe Acrobat PDF (11 kB) |
2012-08-27 00:00:00 2012-08-27 00:00:00 |
| 6 | External Photos | External Photos Adobe Acrobat PDF (174 kB) |
2012-08-27 00:00:00 2012-08-27 00:00:00 |
APP # 5 (2012-08-27)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 5 | Test Report | Test Report Adobe Acrobat PDF (103 kB) |
2012-08-27 00:00:00 2012-08-27 00:00:00 |
| 5 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (167 kB) |
2012-08-27 00:00:00 2012-08-27 00:00:00 |
| 5 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (30 kB) |
2012-08-27 00:00:00 2012-08-27 00:00:00 |
| 5 | FCC Cover Letter | Cover Letter(s) Adobe Acrobat PDF (39 kB) |
2012-08-27 00:00:00 2012-08-27 00:00:00 |
| 5 | Agency Agreement | Cover Letter(s) Adobe Acrobat PDF (11 kB) |
2012-08-27 00:00:00 2012-08-27 00:00:00 |
| 5 | External Photos | External Photos Adobe Acrobat PDF (174 kB) |
2012-08-27 00:00:00 2012-08-27 00:00:00 |
APP # 4 (2011-04-05)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 4 | User Manual | Users Manual Adobe Acrobat PDF (2156 kB) |
2011-04-04 00:00:00 2011-04-05 00:00:00 |
| 4 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (2739 kB) |
2011-04-04 00:00:00 2011-04-05 00:00:00 |
| 4 | Test Report | Test Report Adobe Acrobat PDF (2125 kB) |
2011-04-04 00:00:00 2011-04-05 00:00:00 |
| 4 | RF Exposure MPE | RF Exposure Info Adobe Acrobat PDF (23 kB) |
2011-04-04 00:00:00 2011-04-05 00:00:00 |
| 4 | Label and Location | ID Label/Location Info Adobe Acrobat PDF (79 kB) |
2011-04-04 00:00:00 2011-04-05 00:00:00 |
| 4 | Internal Photos | Internal Photos Adobe Acrobat PDF (143 kB) |
2011-04-04 00:00:00 2011-04-05 00:00:00 |
| 4 | External Photos | External Photos Adobe Acrobat PDF (290 kB) |
2011-04-04 00:00:00 2011-04-05 00:00:00 |
| 4 | Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (21 kB) |
2011-04-04 00:00:00 2011-04-05 00:00:00 |
| 4 | Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (1509 kB) |
2011-04-04 00:00:00 2011-04-05 00:00:00 |
| 4 | Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (31 kB) |
2011-04-04 00:00:00 2011-04-05 00:00:00 |
APP # 3 (2011-04-05)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 3 | User Manual | Users Manual Adobe Acrobat PDF (2156 kB) |
2011-04-04 00:00:00 2011-04-05 00:00:00 |
| 3 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (2739 kB) |
2011-04-04 00:00:00 2011-04-05 00:00:00 |
| 3 | Test Report | Test Report Adobe Acrobat PDF (2116 kB) |
2011-04-04 00:00:00 2011-04-05 00:00:00 |
| 3 | RF Exposure MPE | RF Exposure Info Adobe Acrobat PDF (23 kB) |
2011-04-04 00:00:00 2011-04-05 00:00:00 |
| 3 | Label and Location | ID Label/Location Info Adobe Acrobat PDF (79 kB) |
2011-04-04 00:00:00 2011-04-05 00:00:00 |
| 3 | Internal Photos | Internal Photos Adobe Acrobat PDF (143 kB) |
2011-04-04 00:00:00 2011-04-05 00:00:00 |
| 3 | External Photos | External Photos Adobe Acrobat PDF (290 kB) |
2011-04-04 00:00:00 2011-04-05 00:00:00 |
| 3 | Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (21 kB) |
2011-04-04 00:00:00 2011-04-05 00:00:00 |
| 3 | Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (1509 kB) |
2011-04-04 00:00:00 2011-04-05 00:00:00 |
| 3 | Cover Letter | Cover Letter(s) Adobe Acrobat PDF (31 kB) |
2011-04-04 00:00:00 2011-04-05 00:00:00 |
APP # 2 (2008-12-31)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Manual | Users Manual Adobe Acrobat PDF (2156 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
| 2 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (595 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
| 2 | Test Report DTS | Test Report Adobe Acrobat PDF (359 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
| 2 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (30 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
| 2 | Internal Photos | Internal Photos Adobe Acrobat PDF (257 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
| 2 | Label Information | ID Label/Location Info Adobe Acrobat PDF (159 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
| 2 | External Photos | External Photos Adobe Acrobat PDF (18 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
| 2 | Modular Approval Letter | Cover Letter(s) Adobe Acrobat PDF (30 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
| 2 | Confidentiality Request | Cover Letter(s) Adobe Acrobat PDF (37 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
| 2 | Cover Letter | Cover Letter(s) Adobe Acrobat PDF (18 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
| 2 | Agency Agreement | Cover Letter(s) Adobe Acrobat PDF (26 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
APP # 1 (2008-12-31)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Cover Letter | Cover Letter(s) Adobe Acrobat PDF (18 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
| 1 | Agency Agreement | Cover Letter(s) Adobe Acrobat PDF (26 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
| 1 | Manual | Users Manual Adobe Acrobat PDF (2156 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
| 1 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (595 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
| 1 | Test Report | Test Report Adobe Acrobat PDF (371 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
| 1 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (30 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
| 1 | Internal Photos | Internal Photos Adobe Acrobat PDF (257 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
| 1 | Label Information | ID Label/Location Info Adobe Acrobat PDF (159 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
| 1 | External Photos | External Photos Adobe Acrobat PDF (18 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
| 1 | Confidentiality Request | Cover Letter(s) Adobe Acrobat PDF (37 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
| 1 | Modular Approval Letter | Cover Letter(s) Adobe Acrobat PDF (30 kB) |
2008-12-31 00:00:00 2008-12-31 00:00:00 |
APP # 4 (2011-04-05)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 4 | Schematics | Schematics Adobe Acrobat PDF (130 kB) |
2011-04-04 00:00:00 N/A |
APP # 3 (2011-04-05)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 3 | Schematics | Schematics Adobe Acrobat PDF (130 kB) |
2011-04-04 00:00:00 N/A |
APP # 1 (2008-12-31)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | System Block Diagram | Block Diagram Adobe Acrobat PDF (28 kB) |
2008-12-31 00:00:00 N/A |
APP # 2 (2008-12-31)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Theory of Operation | Operational Description Adobe Acrobat PDF (126 kB) |
2008-12-31 00:00:00 N/A |
APP # 3 (2011-04-05)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 3 | Description | Operational Description Adobe Acrobat PDF (103 kB) |
2011-04-04 00:00:00 N/A |
APP # 2 (2008-12-31)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | System Block Diagram | Block Diagram Adobe Acrobat PDF (28 kB) |
2008-12-31 00:00:00 N/A |
APP # 4 (2011-04-05)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 4 | Block Diagram | Block Diagram Adobe Acrobat PDF (30 kB) |
2011-04-04 00:00:00 N/A |
APP # 1 (2008-12-31)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Schematics | Schematics Adobe Acrobat PDF (97 kB) |
2008-12-31 00:00:00 N/A |
APP # 3 (2011-04-05)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 3 | Block Diagram | Block Diagram Adobe Acrobat PDF (30 kB) |
2011-04-04 00:00:00 N/A |
APP # 4 (2011-04-05)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 4 | Description | Operational Description Adobe Acrobat PDF (103 kB) |
2011-04-04 00:00:00 N/A |
APP # 1 (2008-12-31)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Theory of Operation | Operational Description Adobe Acrobat PDF (126 kB) |
2008-12-31 00:00:00 N/A |
APP # 2 (2008-12-31)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Schematics | Schematics Adobe Acrobat PDF (97 kB) |
2008-12-31 00:00:00 N/A |
Application Forms
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Applications are submitted for FCC ID and Grant requests. Click an above application to view details
Grants
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 12/31/2008 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900 MHz Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.25 - 927.25 | 0.938 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 28.75%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 12/31/2008 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900 MHz Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.25 - 927.25 | 0.938 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 28.75%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: |
EA957064 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 08/27/2012 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900 MHz Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.938 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 28.75%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Change to add new antenna type as described in this filing. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 08/27/2012 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900 MHz Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.938 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 28.75%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Change to add new antenna type as described in this filing. |
| Mail To: |
EA241168 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 08/27/2012 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | 900 MHz Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.25 - 926.25 | 0.057 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Change to add new antenna type as described in this filing. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 08/27/2012 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | 900 MHz Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.25 - 926.25 | 0.057 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Change to add new antenna type as described in this filing. |
| Mail To: |
EA432033 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/05/2011 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900 MHz Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.75 - 927.25 | 0.938 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 28.75%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 04/05/2011 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 900 MHz Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.75 - 927.25 | 0.938 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. The module must transmit with a duty factor not exceeding 28.75%, controlled by firmware and software. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
EA898645 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 04/05/2011 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | 900 MHz Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 903.25 - 926.25 | 0.057 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 04/05/2011 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | 900 MHz Spread Spectrum Wireless Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 903.25 - 926.25 | 0.057 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
EA337655 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 12/31/2008 |
| Murata Electronics North America |
| 2200 Lake Park Drive |
| Smyrna, GA 30080-7604 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | 900 MHz Spread Spectrum Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.25 - 926.25 | 0.057 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
Murata Electronics North America 2200 Lake Park Drive Smyrna, GA 30080-7604 United States |
Date of Grant: 12/31/2008 |
| Attention: Mark Tucker , Director of Hardware Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HSW-DNT900 |
| Name of Grantee: | Murata Electronics North America |
| Equipment Class: | Digital Transmission System |
| Notes: | 900 MHz Spread Spectrum Transceiver |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.25 - 926.25 | 0.057 |
| Single Modular Approval. Power output is conducted at the antenna terminal. MPE compliance was demonstrated for antenna(s) of the type and gain as shown in the filing. Final antenna installation and operating configurations of this transmitter including antenna gain and cable loss must not exceed the EIRP of the configuration used for calculating MPE. Products operating with this module are required to provide a minimum separation distance of at least 23 cm between the antenna and all persons during normal operation. Grantee must coordinate with OEM integrators to ensure the end-users of products operating with this module are provided with operating instructions to satisfy RF exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: |
EA130191 |