FCC ID HWF-WCN11BC

802.11b Wireless LAN CardBus

by Mustek Systems Inc

Grantee Code: HWF   Product Code: WCN11BC
Latest application date: 2003-05-20

FCC ID Device Details

FCC IDHWF-WCN11BC
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeHWF
Product CodeWCN11BC
Applicant BusinessMustek Systems Inc 🇹🇼
Equipment Class802.11b Wireless LAN CardBus
Test FirmDEKRA Testing and Certification Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2003-05-20

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2003-05-20PDF 947.1 KB
Internal PhotosInternal Photos2003-05-20PDF 428.4 KB
External PhotosExternal Photos2003-05-20PDF 145.3 KB
ID LabelID Label/Location Info2003-05-20PDF 140.3 KB
Location InfoID Label/Location Info2003-05-20PDF 140.5 KB
Block diagramBlock Diagram2003-05-20PDF 13 KB
SchematicsSchematics2003-05-20PDF 110.4 KB
Operational DescriptionOperational Description2003-05-20PDF 49 KB
Test Setup PhotosTest Setup Photos2003-05-20PDF 295.6 KB
Test ReportTest Report2003-05-20PDF 342.2 KB
RF Exposure InfoRF Exposure Info2003-05-20PDF 1.3 MB

Application Information

Application IDsU5sAk3YX3W40QrR4h89VA==
Final Action Date2003-05-20
Application PurposeOriginal Equipment
Applicant FRN0008955965
ModelWCN11BC
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11b Wireless LAN CardBus
Responsible PartyMiller Hsieh, Electronics Engineer, 886-3577-9373
AgentGene Gene Gene, QuieTek Corporation, 886-2-86013788
Test FirmSky Hsu, DEKRA Testing and Certification Co., Ltd., skyhsu@quietek.com , 886-2-86013788
TCB Emailk.knoerig@emcc.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is conducted. The SAR data in this filing is applicable to demonstrate compliance for final host products only as shown in this filing. Installation of this device into other host products requires the submission of a Class II permissive change application. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. SAR compliance was evaluated as described in this filing for device installed in notebook computer in lap-held position, and end-of-card side position for certain user and bystanders conditions. The highest reported SAR value is: Body 0.22 W/kg.

Applications

Application IDDatePurpose
sU5sAk3YX3W40QrR4h89VA==2003-05-20Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.134000015CCE

Grants

TCB Grant - Application sU5sAk3YX3W40QrR4h89VA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  EMCCons DR RASEK GmbH & Co. KG
Stoernhofer Berg 15
Unterleinleiter, 91364
Germany
Date of Grant: 05/20/2003

Application Dated: 05/19/2003
Mustek Systems Inc
No. 25, R&D Rd. II
Science Based Industrial Park
Hsin-chu,
Taiwan
 
Attention: Miller Hsieh , Electronics Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HWF-WCN11BC
Name of Grantee:  Mustek Systems Inc
Equipment Class: Digital Transmission System
Notes: 802.11b Wireless LAN CardBus
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.134  

Power output listed is conducted. The SAR data in this filing is applicable to demonstrate compliance for final host products only as shown in this filing. Installation of this device into other host products requires the submission of a Class II permissive change application. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. SAR compliance was evaluated as described in this filing for device installed in notebook computer in lap-held position, and end-of-card side position for certain user and bystanders conditions. The highest reported SAR value is: Body 0.22 W/kg.

CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

EAS Grant - Application sU5sAk3YX3W40QrR4h89VA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mustek Systems Inc
No. 25, R&D Rd. II Science Based Industrial Park
Hsin-chu,
Taiwan
  Date of Grant: 05/20/2003

Application Dated: 05/19/2003
 
Attention: Miller Hsieh , Electronics Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HWF-WCN11BC
Name of Grantee:  Mustek Systems Inc
Equipment Class: Digital Transmission System
Notes: 802.11b Wireless LAN CardBus
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CE 15C 2412.0  -  2462.0 0.134  

Power output listed is conducted. The SAR data in this filing is applicable to demonstrate compliance for final host products only as shown in this filing. Installation of this device into other host products requires the submission of a Class II permissive change application. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. SAR compliance was evaluated as described in this filing for device installed in notebook computer in lap-held position, and end-of-card side position for certain user and bystanders conditions. The highest reported SAR value is: Body 0.22 W/kg.


CE: This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions.

Mail To: