FCC ID HYQBTA01A
Bluetooth ASSY.
by Denso Corporation
Grantee Code: HYQ Product Code: BTA01A
Latest application date: 2003-11-14
FCC ID Device Details
| FCC ID | HYQBTA01A |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | HYQ |
| Product Code | BTA01A |
| Applicant Business | Denso Corporation 🇯🇵 |
| Related Domains |  jp.denso.com |
| Equipment Class | Bluetooth ASSY. |
| Test Firm | UL Apex Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2003-11-14 |
| 2402-2480 MHz | Original Equipment | 2003-03-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2003-03-28 | PDF 120.4 KB |
| Internal Photos | Internal Photos | 2003-03-28 | PDF 265.8 KB |
| External photos 1 | External Photos | 2003-11-14 | PDF 1.1 MB |
| External photos 2 | External Photos | 2003-11-14 | PDF 789.9 KB |
| External Photos | External Photos | 2003-03-28 | PDF 151.8 KB |
| Label and Location | ID Label/Location Info | 2003-03-28 | PDF 1.2 MB |
| General Description | Operational Description | 2003-03-28 | PDF 90.2 KB |
| Instalation Description | Operational Description | 2003-03-28 | PDF 691.3 KB |
| Technical Description | Operational Description | 2003-03-28 | PDF 62.3 KB |
| Test setup | Test Setup Photos | 2003-11-14 | PDF 624.5 KB |
| Site Pics | Test Setup Photos | 2003-03-28 | PDF 94 KB |
| Test report | Test Report | 2003-11-14 | PDF 733.7 KB |
| Test Report | Test Report | 2003-03-28 | PDF 2.1 MB |
| Reason for PC2 | Cover Letter(s) | 2003-11-14 | PDF 8.3 KB |
| Request for confidentiality | Cover Letter(s) | 2003-11-14 | PDF 32 KB |
| Declarations | Cover Letter(s) | 2003-03-28 | PDF 1.7 MB |
| Modular Request | Cover Letter(s) | 2003-03-28 | PDF 61 KB |
| RF Exposure Information | RF Exposure Info | 2003-03-28 | PDF 11.1 KB |
| Block Metadata only | Block Diagram | PDF 16.4 KB | |
| Block diagram Metadata only | Block Diagram | PDF 41.7 KB | |
| Antenna circuit change Metadata only | Schematics | PDF 8.2 KB | |
| Schema Metadata only | Schematics | PDF 129.9 KB |
Application Information
| Application ID | Gl9pBC9VDPC6BayNoZK5eQ== |
|---|---|
| Final Action Date | 2003-11-14 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0005820071 |
| Model | BTA01A |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Bluetooth ASSY. |
| Responsible Party | Keijiro Kumagai, Manager, keijiro.kumagai.j4w@jp.denso.com , 81-566-55-9563 |
| Agent | Tetsuya Tetsuya Tetsuya, UL Apex Co., Ltd., tetsuya.hashimoto@jp.ul.com  , 81-596-24-8116 |
| Technical Contact | Naoki Sakamoto, UL Apex Co., Ltd., Naoki.Sakamoto@jp.ul.com , 81-596-24-8116 |
| Test Firm | Tetsuya Hashimoto, UL Apex Co., Ltd., hasimt@a-pex.co.jp  , 81-596-24-8116 |
| TCB Email | hotline@americantcb.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Gl9pBC9VDPC6BayNoZK5eQ== | 2003-11-14 | Class II permissive change or modification of presently authorized equipment |
| USXmbkJoDV2KvFaHVqLjwg== | 2003-03-28 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0008300 | 15C |
Grants
TCB Grant - Application USXmbkJoDV2KvFaHVqLjwg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/28/2003 Application Dated: 03/26/2003 |
| Denso Corporation |
| 1-1, Showa-cho |
| Kariya-shi, Aichi-ken, 448-8661 Japan |
| Attention: Keijiro Kumagai , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HYQBTA01A |
| Name of Grantee: | Denso Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth ASSY. |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00083 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application USXmbkJoDV2KvFaHVqLjwg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Denso Corporation 1-1, Showa-cho Kariya-shi, Aichi-ken, 448-8661 Japan |
Date of Grant: 03/28/2003 Application Dated: 03/26/2003 |
| Attention: Keijiro Kumagai , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HYQBTA01A |
| Name of Grantee: | Denso Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth ASSY. |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00083 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/14/2003 Application Dated: 11/14/2003 |
| Denso Corporation |
| 1-1, Showa-cho |
| Kariya-shi, Aichi-ken, 448-8661 Japan |
| Attention: Keijiro Kumagai , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HYQBTA01A |
| Name of Grantee: | Denso Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth ASSY. |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00083 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application Gl9pBC9VDPC6BayNoZK5eQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Denso Corporation 1-1, Showa-cho Kariya-shi, Aichi-ken, 448-8661 Japan |
Date of Grant: 11/14/2003 Application Dated: 11/14/2003 |
| Attention: Keijiro Kumagai , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HYQBTA01A |
| Name of Grantee: | Denso Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth ASSY. |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00083 |
| Modular Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: |