FCC ID HYQDNNS097

Control Box

by Denso Corporation

Grantee Code: HYQ   Product Code: DNNS097
Latest application date: 2020-01-21

FCC ID Device Details

FCC IDHYQDNNS097
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeHYQ
Product CodeDNNS097
Applicant BusinessDenso Corporation 🇯🇵
Related Domains jp.denso.com
Equipment ClassControl Box
Test FirmUL Japan, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2020-01-21
2402-2480 MHzOriginal Equipment2020-01-21
5180-5320 MHzOriginal Equipment2020-01-21

Exhibits

DocumentTypeAvailableFile
05 Short-Term Confidential_User ManualUsers Manual2020-07-20PDF 94.2 KB
04 Short-Term Confidential_Internal PhotoInternal Photos2020-07-20PDF 850.9 KB
04 Short-Term Confidential_External PhotoExternal Photos2020-07-20PDF 271.5 KB
06 Label and Location(FCC)ID Label/Location Info2020-01-21PDF 122.8 KB
03 Short-Term Confidential_FCC DFS Setup PhotoTest Setup Photos2020-07-20PDF 190.5 KB
03 Short-Term Confidential_FCC Test Setup Photo_DSSTest Setup Photos2020-07-20PDF 244.4 KB
03 Short-Term Confidential_FCC Test Setup Photo_DTSTest Setup Photos2020-07-20PDF 244.8 KB
03 Short-Term Confidential_FCC Test Setup Photo_NIITest Setup Photos2020-07-20PDF 245.8 KB
03 FCC DFS ReportTest Report2020-01-21PDF 741.1 KB
03 FCC Test Report_DSSTest Report2020-01-21PDF 1.6 MB
03 FCC Test Report_DTSTest Report2020-01-21PDF 1.7 MB
03 FCC Test Report_NII-1Test Report2020-01-21PDF 5.8 MB
03 FCC Test Report_NII-2Test Report2020-01-21PDF 5.7 MB
02 FCC Authorization LetterCover Letter(s)2020-01-21PDF 84.1 KB
02 FCC Request for Confidentiality LetterCover Letter(s)2020-01-21PDF 83 KB
02 FCC Request for Short-term Confidentiality LetterCover Letter(s)2020-01-21PDF 85.5 KB
03 FCC RF ExposureDTSRF Exposure Info2020-01-21PDF 98.6 KB
03 FCC RF Exposure_DSSRF Exposure Info2020-01-21PDF 120.6 KB
03 FCC RF Exposure_NIIRF Exposure Info2020-01-21PDF 112.4 KB
07 Confidential_Block Diagram Metadata onlyBlock DiagramPDF 123.2 KB
09 Confidential_Schematics Metadata onlySchematicsPDF 186.4 KB
08 Confidential_Theory of Operation-Antenna Specification Metadata onlyOperational DescriptionPDF 103.9 KB
08 Confidential_Theory of Operation-Channel List(DTS,NII) Metadata onlyOperational DescriptionPDF 59.6 KB
08 Confidential_Theory of Operation-Module Specification Metadata onlyOperational DescriptionPDF 670.4 KB
08 Confidential_Theory of Operation-Product Outline Metadata onlyOperational DescriptionPDF 67.1 KB
08 Confidential_Theory of Operation-Software Security(NII) Metadata onlyOperational DescriptionPDF 105.6 KB
08 Confidential_Theory of Operation-Technical Description Metadata onlyOperational DescriptionPDF 117.9 KB
10 Confidential_Parts List Metadata onlyParts List/Tune Up InfoPDF 21 KB

Application Information

Application IDuSk8UqkAn173CQn49p2nHg==
Final Action Date2020-01-21
Application PurposeOriginal Equipment
Applicant FRN0005820071
ModelDNNS097
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionControl Box
Responsible PartyKeijiro Kumagai, Manager, keijiro.kumagai.j4w@jp.denso.com , 81-566-55-9563
AgentRie Rie Rie, UL Japan, Inc., Rie.Fujiwara@ul.com , 81-596-24-8999
Technical ContactSatofumi Matsuyama, UL Japan, Inc., Satofumi.Matsuyama@ul.com , 81-596-24-8999
Test FirmMasamichi Ishii, UL Japan, Inc., masamichi.ishii@ul.com , 81-596-24-8999
TCB Emailemc.jp@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date07/20/2020
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is Conducted(Peak). The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
uSk8UqkAn173CQn49p2nHg==2020-01-21Original Equipment
HHfZJp91qLtcYUBKxy9Qxg==2020-01-21Original Equipment
4iAlrnVjopQ6GERsQe02pg==2020-01-21Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.001800015CCC
2402-2480 MHz0.00115CCC
2412-2462 MHz0.258215CCC
5180-5320 MHz0.021515ECC, MO
5500-5700 MHz0.021715ECC, MO
5745-5825 MHz0.021515ECC, MO

Grants

TCB Grant - Application uSk8UqkAn173CQn49p2nHg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 01/21/2020

Application Dated: 01/21/2020
Denso Corporation
1-1, Showa-cho
Kariya-shi, Aichi-ken, 448-8661
Japan
 
Attention: Keijiro Kumagai , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HYQDNNS097
Name of Grantee:  Denso Corporation
Equipment Class: Digital Transmission System
Notes: Control Box
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.2582  
CC 15C 2402.0  -  2480.0 0.001  

Output power listed is Conducted(Peak). The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application uSk8UqkAn173CQn49p2nHg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Denso Corporation
1-1, Showa-cho
Kariya-shi, Aichi-ken, 448-8661
Japan
  Date of Grant: 01/21/2020

Application Dated: 01/21/2020
 
Attention: Keijiro Kumagai , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HYQDNNS097
Name of Grantee:  Denso Corporation
Equipment Class: Digital Transmission System
Notes: Control Box
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.2582  
CC 15C 2402.0  -  2480.0 0.001  

Output power listed is Conducted(Peak). The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application HHfZJp91qLtcYUBKxy9Qxg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 01/21/2020

Application Dated: 01/21/2020
Denso Corporation
1-1, Showa-cho
Kariya-shi, Aichi-ken, 448-8661
Japan
 
Attention: Keijiro Kumagai , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HYQDNNS097
Name of Grantee:  Denso Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Control Box
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0018  

Output power listed is Conducted(Peak). The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application HHfZJp91qLtcYUBKxy9Qxg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Denso Corporation
1-1, Showa-cho
Kariya-shi, Aichi-ken, 448-8661
Japan
  Date of Grant: 01/21/2020

Application Dated: 01/21/2020
 
Attention: Keijiro Kumagai , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HYQDNNS097
Name of Grantee:  Denso Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Control Box
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0018  

Output power listed is Conducted(Peak). The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 4iAlrnVjopQ6GERsQe02pg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 01/21/2020

Application Dated: 01/21/2020
Denso Corporation
1-1, Showa-cho
Kariya-shi, Aichi-ken, 448-8661
Japan
 
Attention: Keijiro Kumagai , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HYQDNNS097
Name of Grantee:  Denso Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Control Box
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5320.0 0.0215  
CC MO 15E 5500.0  -  5700.0 0.0217  
CC MO 15E 5745.0  -  5825.0 0.0215  

Output power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 4iAlrnVjopQ6GERsQe02pg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Denso Corporation
1-1, Showa-cho
Kariya-shi, Aichi-ken, 448-8661
Japan
  Date of Grant: 01/21/2020

Application Dated: 01/21/2020
 
Attention: Keijiro Kumagai , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HYQDNNS097
Name of Grantee:  Denso Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Control Box
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5320.0 0.0215  
CC MO 15E 5500.0  -  5700.0 0.0217  
CC MO 15E 5745.0  -  5825.0 0.0215  

Output power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: