FCC ID HZB-4954R

Single Band Wireless AP w/ Built in Amplifiers

by Proxim Wireless Corporation

Grantee Code: HZB   Product Code: 4954R
Latest application date: 2007-09-27

FCC ID Device Details

FCC IDHZB-4954R
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeHZB
Product Code4954R
Applicant BusinessProxim Wireless Corporation 🇺🇸
Related Domains proxim.com ccsemc.com
Equipment ClassSingle Band Wireless AP w/ Built in Amplifiers
Test FirmCompliance Certification Services

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
4945-4985 MHzClass II permissive change or modification of presently authorized equipment2007-09-27
4945-4985 MHzOriginal Equipment2006-12-21

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2007-09-27PDF 1.9 MB
User Manual 1 of 2Users Manual2007-02-04PDF 3.4 MB
User Manual 2 of 2Users Manual2007-02-04PDF 1.9 MB
User Manual Compliance StatementUsers Manual2007-02-04PDF 341.3 KB
Internal Photo 1 of 2Internal Photos2007-02-04PDF 1.8 MB
Internal Photo 2 of 2Internal Photos2007-02-04PDF 3.2 MB
External PhotosExternal Photos2007-02-04PDF 844.7 KB
FCC ID LabelID Label/Location Info2007-09-27PDF 178.9 KB
ID label format and locationID Label/Location Info2006-12-21PDF 178.9 KB
Setup PhotosTest Setup Photos2007-09-27PDF 218.3 KB
Test Setup PhotosTest Setup Photos2007-02-04PDF 250.7 KB
Test ReportTest Report2007-09-27PDF 1.2 MB
Test ReportTest Report2006-12-21PDF 1.1 MB
Authorization LetterCover Letter(s)2007-09-27PDF 18.5 KB
Class II Permissive Change LetterCover Letter(s)2007-09-27PDF 17.1 KB
Request for ConfidentialityCover Letter(s)2007-09-27PDF 49 KB
5 MHz BW StatementCover Letter(s)2006-12-21PDF 20.3 KB
Agency Authorization LetterCover Letter(s)2006-12-21PDF 32.9 KB
Request for Confidentiality LetterCover Letter(s)2006-12-21PDF 56 KB
TCB Q and ACover Letter(s)2006-12-21PDF 17.2 KB
Block Diagram Metadata onlyBlock DiagramPDF 16 KB
Schematic Diagram Metadata onlySchematicsPDF 589.1 KB
Schematic Diagram MB Metadata onlySchematicsPDF 226.1 KB
Amplifier Theory of Operation Metadata onlyOperational DescriptionPDF 23.8 KB
Technical Description Metadata onlyOperational DescriptionPDF 24.9 KB
Parts List for AMP Metadata onlyParts List/Tune Up InfoPDF 32.2 KB
Parts list for DB Metadata onlyParts List/Tune Up InfoPDF 44.3 KB
Parts list for MB Metadata onlyParts List/Tune Up InfoPDF 58.6 KB
Parts list for RF board Metadata onlyParts List/Tune Up InfoPDF 52.3 KB
Tune up Procedure Metadata onlyParts List/Tune Up InfoPDF 9.8 KB

Application Information

Application ID4eIxUSS1ajHqIbC74lgAgQ==
Final Action Date2007-09-27
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0014765044
Model-4954R
Frequency Range4945-4985 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionSingle Band Wireless AP w/ Built in Amplifiers
Responsible PartyCor van de Water, Sr. Regulatory and Compliance Manager, cwater@proxim.com , 408 383 7600
Technical ContactThu Chan, COMPLIANCE CERTIFICATION SERVICES, Thu.Chan@CCSEMC.COM , 510-771-1000
Non-Technical ContactThu Chan, COMPLIANCE CERTIFICATION SERVICES, Thu.Chan@CCSEMC.COM , 510-771-1000
Test FirmBarbara Judge, Compliance Certification Services, bjudge@ccsemc.com , 510-771-1104
TCB Emailmike.kuo@ccsemc.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change. Power output listed is conducted. The antennas require professional installation and must be fixed-mounted on outdoor permanent structures with a separation distance of at least 20 cm from all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Directional antennas with a gain exceeding 9dBi for the 10MHz Channel bandwidths or 11.3dBi for the 20MHz Channel bandwidth require a corresponding reduction in dB of the Peak Power and Peak Power Spectral Density that the antenna exceeds 9dBi or 11.3dBi, respectively.

Applications

Application IDDatePurpose
4eIxUSS1ajHqIbC74lgAgQ==2007-09-27Class II permissive change or modification of presently authorized equipment
yCD7XH5uqUfSjAqBISSZhA==2006-12-21Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
4945-4985 MHz0.048750.0006%8M89W7D90, 936
4945-4985 MHz0.048750.0006%8M89W7D936
4950-4980 MHz0.057680.0006%17M8W7D90, 936

Grants

TCB Grant - Application yCD7XH5uqUfSjAqBISSZhA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 12/21/2006

Application Dated: 12/21/2006
Proxim Wireless Corporation
2114 Ringwood Avenue
San Jose, CA 95131
 
Attention: Ken Lim , Accounting Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HZB-4954R
Name of Grantee:  Proxim Wireless Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Single Band Wireless AP W/ Build in Amplifiers
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 90 4945.0  -  4985.0 0.04875 0.0006  % 8M89W7D
36 90 4950.0  -  4980.0 0.05768 0.0006  % 17M8W7D

Power output listed is conducted. The antennas require professional installation and must be fixed-mounted on outdoor permanent structures with a separation distance of at least 20 cm from all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Directional antennas with a gain exceeding 9dBi for the 10MHz Channel bandwidths or 11.3dBi for the 20MHz Channel bandwidth require a corresponding reduction in dB of the Peak Power and Peak Power Spectral Density that the antenna exceeds 9dBi or 11.3dBi, respectively.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.

EAS Grant - Application yCD7XH5uqUfSjAqBISSZhA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Proxim Wireless Corporation
2114 Ringwood Avenue
San Jose, CA 95131
United States
  Date of Grant: 12/21/2006

Application Dated: 12/21/2006
 
Attention: Ken Lim , Accounting Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HZB-4954R
Name of Grantee:  Proxim Wireless Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Single Band Wireless AP W/ Build in Amplifiers
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 90 4945.0  -  4985.0 0.04875 0.0006  % 8M89W7D
36 90 4950.0  -  4980.0 0.05768 0.0006  % 17M8W7D

Power output listed is conducted. The antennas require professional installation and must be fixed-mounted on outdoor permanent structures with a separation distance of at least 20 cm from all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Directional antennas with a gain exceeding 9dBi for the 10MHz Channel bandwidths or 11.3dBi for the 20MHz Channel bandwidth require a corresponding reduction in dB of the Peak Power and Peak Power Spectral Density that the antenna exceeds 9dBi or 11.3dBi, respectively.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.

TCB Grant - Application 4eIxUSS1ajHqIbC74lgAgQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 09/27/2007

Application Dated: 09/26/2007
Proxim Wireless Corporation
47633 Westinghouse Drive
Fremont, CA 94539
 
Attention: Cor van de Water , Sr. Regulatory and Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HZB-4954R
Name of Grantee:  Proxim Wireless Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Single Band Wireless AP w/ Built in Amplifiers
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 90 4945.0  -  4985.0 0.04875 0.0006  % 8M89W7D
36 90 4950.0  -  4980.0 0.05768 0.0006  % 17M8W7D

Class II Permissive Change.

Power output listed is conducted. The antennas require professional installation and must be fixed-mounted on outdoor permanent structures with a separation distance of at least 20 cm from all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Directional antennas with a gain exceeding 9dBi for the 10MHz Channel bandwidths or 11.3dBi for the 20MHz Channel bandwidth require a corresponding reduction in dB of the Peak Power and Peak Power Spectral Density that the antenna exceeds 9dBi or 11.3dBi, respectively.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.

EAS Grant - Application 4eIxUSS1ajHqIbC74lgAgQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Proxim Wireless Corporation
47633 Westinghouse Drive
Fremont, CA 94539
United States
  Date of Grant: 09/27/2007

Application Dated: 09/26/2007
 
Attention: Cor van de Water , Sr. Regulatory and Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  HZB-4954R
Name of Grantee:  Proxim Wireless Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Single Band Wireless AP w/ Built in Amplifiers
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
36 90 4945.0  -  4985.0 0.04875 0.0006  % 8M89W7D
36 90 4950.0  -  4980.0 0.05768 0.0006  % 17M8W7D

Class II Permissive Change.

Power output listed is conducted. The antennas require professional installation and must be fixed-mounted on outdoor permanent structures with a separation distance of at least 20 cm from all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter except as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Directional antennas with a gain exceeding 9dBi for the 10MHz Channel bandwidths or 11.3dBi for the 20MHz Channel bandwidth require a corresponding reduction in dB of the Peak Power and Peak Power Spectral Density that the antenna exceeds 9dBi or 11.3dBi, respectively.


36: Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application.

Mail To: