FCC ID I28MD-CXLAN11G
Zebra Embedded b/g radio
by Zebra Technologies Corporation
Grantee Code: I28 Product Code: MDCXLAN11G
Latest application date: 2014-02-19
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2014-02-19 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2012-11-15 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2012-07-23 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2012-06-13 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2011-10-03 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2011-09-16 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2011-06-24 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2011-03-08 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2011-03-03 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2011-03-03 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2011-03-03 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2011-03-03 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2011-03-03 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2011-03-03 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2011-02-01 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2010-11-01 |
| 2412-2462 MHz | Original Equipment | 2010-01-04 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2010-01-04 | PDF 4.1 MB |
| internal photo | Internal Photos | 2012-11-15 | PDF 92.1 KB |
| Interanl Photos | Internal Photos | 2012-07-23 | PDF 182.3 KB |
| Internal Photos | Internal Photos | 2012-06-13 | PDF 120.1 KB |
| internal photo | Internal Photos | 2011-10-03 | PDF 185.3 KB |
| Internal Photo | Internal Photos | 2011-09-16 | PDF 159.2 KB |
| internal photo | Internal Photos | 2011-06-24 | PDF 277.1 KB |
| internal photo | Internal Photos | 2011-03-08 | PDF 178.2 KB |
| internal photo | Internal Photos | 2011-03-03 | PDF 216.2 KB |
| Internal Photo | Internal Photos | 2011-02-01 | PDF 174.3 KB |
| internal photo | Internal Photos | 2010-11-01 | PDF 205.6 KB |
| Internal Photos | Internal Photos | 2010-01-04 | PDF 128.4 KB |
| EUT External Photos | External Photos | 2014-02-19 | PDF 191.7 KB |
| Host Printer Photos | External Photos | 2014-02-19 | PDF 217.4 KB |
| external photo | External Photos | 2012-11-15 | PDF 99.5 KB |
| External Photos | External Photos | 2012-07-23 | PDF 319.5 KB |
| External Photos - ZE500-4 | External Photos | 2012-06-13 | PDF 152.5 KB |
| External Photos - ZE500-6 | External Photos | 2012-06-13 | PDF 128.3 KB |
| external photo | External Photos | 2011-10-03 | PDF 448.5 KB |
| External Photo- MZ320 | External Photos | 2011-09-16 | PDF 302.1 KB |
| External Photo-MZ 220 | External Photos | 2011-09-16 | PDF 151.2 KB |
| external photo | External Photos | 2011-06-24 | PDF 663.3 KB |
| external photo | External Photos | 2011-03-08 | PDF 152.8 KB |
| external photo | External Photos | 2011-03-03 | PDF 111 KB |
| external photo | External Photos | 2011-03-03 | PDF 77.8 KB |
| external photo | External Photos | 2011-03-03 | PDF 352 KB |
| external photo | External Photos | 2011-03-03 | PDF 101.3 KB |
| external photo | External Photos | 2011-03-03 | PDF 80.6 KB |
| external photo | External Photos | 2011-03-03 | PDF 294.8 KB |
| External Photo | External Photos | 2011-02-01 | PDF 128.9 KB |
| external photo | External Photos | 2010-11-01 | PDF 326.2 KB |
| External Photos | External Photos | 2010-01-04 | PDF 425.2 KB |
| ID label and location | ID Label/Location Info | 2010-01-04 | PDF 42.6 KB |
| Test Setup Photos | Test Setup Photos | 2014-02-19 | PDF 266.8 KB |
| Test Setup Photo | Test Setup Photos | 2012-11-15 | PDF 187.8 KB |
| Test Setup Photos | Test Setup Photos | 2012-07-23 | PDF 615.2 KB |
| Test Setup Photos - ZE500-4 | Test Setup Photos | 2012-06-13 | PDF 276.4 KB |
| Test Setup Photos - ZE500-6 | Test Setup Photos | 2012-06-13 | PDF 269.1 KB |
| RF Test Setup | Test Setup Photos | 2011-10-03 | PDF 366.4 KB |
| Setup Photo- MZ 220 | Test Setup Photos | 2011-09-16 | PDF 279.9 KB |
| Setup Photo- MZ 320 | Test Setup Photos | 2011-09-16 | PDF 288 KB |
| setup Photo | Test Setup Photos | 2011-06-24 | PDF 438.2 KB |
| RF Test Setup | Test Setup Photos | 2011-03-08 | PDF 302.1 KB |
| RF Test Setup | Test Setup Photos | 2011-03-03 | PDF 148.6 KB |
| RF Test Setup | Test Setup Photos | 2011-03-03 | PDF 164.6 KB |
| RF Test Setup | Test Setup Photos | 2011-03-03 | PDF 155.7 KB |
| RF Test Setup | Test Setup Photos | 2011-03-03 | PDF 169.9 KB |
| RF Test Setup | Test Setup Photos | 2011-03-03 | PDF 158.3 KB |
| Setup Photo | Test Setup Photos | 2011-03-03 | PDF 161 KB |
| Setup Photo | Test Setup Photos | 2011-02-01 | PDF 101.5 KB |
| Setup Photo | Test Setup Photos | 2010-11-01 | PDF 101.2 KB |
| Test Setup Photos | Test Setup Photos | 2010-01-04 | PDF 742.3 KB |
| RFID & WLAN Report | Test Report | 2014-02-19 | PDF 2 MB |
| WLAN Report | Test Report | 2014-02-19 | PDF 1.3 MB |
| Test Report | Test Report | 2012-11-15 | PDF 2.3 MB |
| Test Report | Test Report | 2012-07-23 | PDF 1.5 MB |
| Test Report - ZE500-4 | Test Report | 2012-06-13 | PDF 1.5 MB |
| Test Report - ZE500-6 | Test Report | 2012-06-13 | PDF 1.5 MB |
| RF test Report 1 of 2 | Test Report | 2011-10-03 | PDF 2.2 MB |
| RF test Report 2 of 2 | Test Report | 2011-10-03 | PDF 2.2 MB |
| TEst Report-MZ 220 | Test Report | 2011-09-16 | PDF 4.5 MB |
| Test Report-MZ 320 | Test Report | 2011-09-16 | PDF 2.6 MB |
| test Report | Test Report | 2011-06-24 | PDF 3.6 MB |
| Updated RF report | Test Report | 2011-03-08 | PDF 2.2 MB |
| RF test Report | Test Report | 2011-03-03 | PDF 2.2 MB |
| RF test Report | Test Report | 2011-03-03 | PDF 2.4 MB |
| RF test Report | Test Report | 2011-03-03 | PDF 2.4 MB |
| RF test Report | Test Report | 2011-03-03 | PDF 2.3 MB |
| RF test Report | Test Report | 2011-03-03 | PDF 2.3 MB |
| test report | Test Report | 2011-03-03 | PDF 2.2 MB |
| Revised test report | Test Report | 2011-02-01 | PDF 2.5 MB |
| test report | Test Report | 2010-11-01 | PDF 1.9 MB |
| Test Report | Test Report | 2010-01-04 | PDF 2.6 MB |
| Authorization Letter | Cover Letter(s) | 2014-02-19 | PDF 59.1 KB |
| Permissive Change Request Letter | Cover Letter(s) | 2014-02-19 | PDF 1 MB |
| Authorization letter | Cover Letter(s) | 2012-11-15 | PDF 125.5 KB |
| C2PC Letter | Cover Letter(s) | 2012-11-15 | PDF 64.5 KB |
| Authorization Letter | Cover Letter(s) | 2012-07-23 | PDF 131 KB |
| PCII Letter | Cover Letter(s) | 2012-07-23 | PDF 108.6 KB |
| Authorization Letter | Cover Letter(s) | 2012-06-13 | PDF 139 KB |
| PCII Letter | Cover Letter(s) | 2012-06-13 | PDF 116.7 KB |
| Authorization letter | Cover Letter(s) | 2011-10-03 | PDF 104.3 KB |
| PCII Letter | Cover Letter(s) | 2011-10-03 | PDF 99.5 KB |
| Authorization Letter | Cover Letter(s) | 2011-09-16 | PDF 495 KB |
| PCII cover letter | Cover Letter(s) | 2011-09-16 | PDF 438 KB |
| Authorization letter | Cover Letter(s) | 2011-06-24 | PDF 201 KB |
| PCII Letter | Cover Letter(s) | 2011-06-24 | PDF 279.6 KB |
| Authorization letter | Cover Letter(s) | 2011-03-08 | PDF 61 KB |
| PCII Letter | Cover Letter(s) | 2011-03-08 | PDF 65.6 KB |
| Supercese Letter | Cover Letter(s) | 2011-03-08 | PDF 80.2 KB |
| Antenna Info | Cover Letter(s) | 2011-03-03 | PDF 946.6 KB |
| Authorization letter | Cover Letter(s) | 2011-03-03 | PDF 299.3 KB |
| Authorization letter | Cover Letter(s) | 2011-03-03 | PDF 299.3 KB |
| Authorization letter | Cover Letter(s) | 2011-03-03 | PDF 299.3 KB |
| Authorization letter | Cover Letter(s) | 2011-03-03 | PDF 299.4 KB |
| Authorization letter | Cover Letter(s) | 2011-03-03 | PDF 299.3 KB |
| Authorization letter | Cover Letter(s) | 2011-03-03 | PDF 299.3 KB |
| PCII Letter | Cover Letter(s) | 2011-03-03 | PDF 63.8 KB |
| PCII Letter | Cover Letter(s) | 2011-03-03 | PDF 63 KB |
| PCII Letter | Cover Letter(s) | 2011-03-03 | PDF 62 KB |
| PCII Letter | Cover Letter(s) | 2011-03-03 | PDF 62.1 KB |
| PCII Letter | Cover Letter(s) | 2011-03-03 | PDF 60.4 KB |
| PCII Letter | Cover Letter(s) | 2011-03-03 | PDF 62.3 KB |
| Auhtorization Letter | Cover Letter(s) | 2011-02-01 | PDF 60.3 KB |
| PCII Request Letter | Cover Letter(s) | 2011-02-01 | PDF 61.1 KB |
| Supercede request letter | Cover Letter(s) | 2011-02-01 | PDF 119.1 KB |
| Authorization letter | Cover Letter(s) | 2010-11-01 | PDF 66.5 KB |
| PCII Letter | Cover Letter(s) | 2010-11-01 | PDF 50.6 KB |
| FCC Auth Letter | Cover Letter(s) | 2010-01-04 | PDF 75.4 KB |
| FCC Confidentiality Request Letter | Cover Letter(s) | 2010-01-04 | PDF 38.8 KB |
| LMA Letter | Cover Letter(s) | 2010-01-04 | PDF 72.8 KB |
| MPE Calculation | RF Exposure Info | 2014-02-19 | PDF 86 KB |
| RF Exposure | RF Exposure Info | 2012-11-15 | PDF 21.9 KB |
| RF Exposure Info | RF Exposure Info | 2012-07-23 | PDF 82 KB |
| RF Exposure Info | RF Exposure Info | 2012-06-13 | PDF 49.4 KB |
| RF Exposure | RF Exposure Info | 2011-10-03 | PDF 12 KB |
| RF Exposure | RF Exposure Info | 2011-09-16 | PDF 11.6 KB |
| MPE | RF Exposure Info | 2011-06-24 | PDF 58.9 KB |
| RF exposure | RF Exposure Info | 2011-03-08 | PDF 32.5 KB |
| RF Exposure | RF Exposure Info | 2011-03-03 | PDF 11.9 KB |
| RF exposure | RF Exposure Info | 2011-03-03 | PDF 11.9 KB |
| RF Exposure | RF Exposure Info | 2011-02-01 | PDF 12 KB |
| RF Exposure | RF Exposure Info | 2010-11-01 | PDF 32.6 KB |
| RF Exposure Info | RF Exposure Info | 2010-01-04 | PDF 11.9 KB |
Application Information
| Application ID | tYo80F+Yrfj0mRUwxPsEug== |
|---|---|
| Final Action Date | 2014-02-19 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006974851 |
| Model | MD-CXLAN11G |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Zebra Embedded b/g radio |
| Responsible Party | Jay Cadiz, Sr. Manager, Regulatory, JCadiz@zebra.com  , 847-616-5806 |
| Test Firm | Leslie BAI, SIEMIC Labs, leslie.bai@siemic.com  , 4085261188 |
| TCB Email | tcb@siemic.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC to add new host (ZE500-4) and operating simultaneously with Radio (FCC ID: I28-URFIDM5E) Limited Modular Approval. Power listed is the maximum conducted output power. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| tYo80F+Yrfj0mRUwxPsEug== | 2014-02-19 | Class II permissive change or modification of presently authorized equipment |
| EKpt8NZvGKHv1h8Cmj1MAw== | 2012-11-15 | Class II permissive change or modification of presently authorized equipment |
| 4KnQRFJEtkqxx6rmtpHraw== | 2012-07-23 | Class II permissive change or modification of presently authorized equipment |
| OMSLAOBxCSab9wLhcPRqig== | 2012-06-13 | Class II permissive change or modification of presently authorized equipment |
| Q5tgR8/2136UKBxSrx6+qg== | 2011-10-03 | Class II permissive change or modification of presently authorized equipment |
| N++u2kuRBJr2AKSfsCzbQQ== | 2011-09-16 | Class II permissive change or modification of presently authorized equipment |
| lGdtcnK8+wEjJx5TtUyE+A== | 2011-06-24 | Class II permissive change or modification of presently authorized equipment |
| BOnh7EzxpTb0rE/rI2PjdQ== | 2011-03-08 | Class II permissive change or modification of presently authorized equipment |
| vK04PVuROvuPcmSeR0jmrA== | 2011-03-03 | Class II permissive change or modification of presently authorized equipment |
| o64npvQbcfNZ+++O6lFaNA== | 2011-03-03 | Class II permissive change or modification of presently authorized equipment |
| goLVJgN/9umS4tImCb3flQ== | 2011-03-03 | Class II permissive change or modification of presently authorized equipment |
| UuRZ25m6U2+JOMFhtqf/ew== | 2011-03-03 | Class II permissive change or modification of presently authorized equipment |
| K+1JCzXC0blpVHXsJeGf3g== | 2011-03-03 | Class II permissive change or modification of presently authorized equipment |
| 5Dw8+Obn964SllL4p7+F8w== | 2011-03-03 | Class II permissive change or modification of presently authorized equipment |
| nuBN8KNeoUDQv6iqmTsCSQ== | 2011-02-01 | Class II permissive change or modification of presently authorized equipment |
| zb0qHj86aAgC6XI83K9Qxw== | 2010-11-01 | Class II permissive change or modification of presently authorized equipment |
| Ksr3OdgRA5mAFP9PSFEgIA== | 2010-01-04 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.0098000 | 15C |
Grants
TCB Grant - Application zb0qHj86aAgC6XI83K9Qxw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 11/01/2010 Application Dated: 11/01/2010 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernoin Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| This is a Limited Modular Approval. PCII, adding new host (RW220, RW420) with new antenna, Listed Power is maximum conducted RF output power. Compliance of this device in all two host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application zb0qHj86aAgC6XI83K9Qxw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 11/01/2010 Application Dated: 11/01/2010 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| This is a Limited Modular Approval. PCII, adding new host (RW220, RW420) with new antenna, Listed Power is maximum conducted RF output power. Compliance of this device in all two host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/03/2011 Application Dated: 03/03/2011 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernoin Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host (170PAX4) and Antenna. This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application vK04PVuROvuPcmSeR0jmrA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 03/03/2011 Application Dated: 03/03/2011 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host (170PAX4) and Antenna. This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/03/2011 Application Dated: 03/03/2011 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernoin Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host (S4M) and Antenna. This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application UuRZ25m6U2+JOMFhtqf/ew==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 03/03/2011 Application Dated: 03/03/2011 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host (S4M) and Antenna. This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 02/19/2014 Application Dated: 02/19/2014 |
| Zebra Technologies Corporation |
| 3 Overlook Point |
| LINCOLNSHIRE, IL 60069 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| C2PC to add new host (ZE500-4) and operating simultaneously with Radio (FCC ID: I28-URFIDM5E) Limited Modular Approval. Power listed is the maximum conducted output power. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
EAS Grant - Application tYo80F+Yrfj0mRUwxPsEug==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 3 Overlook Point LINCOLNSHIRE, IL 60069 United States |
Date of Grant: 02/19/2014 Application Dated: 02/19/2014 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| C2PC to add new host (ZE500-4) and operating simultaneously with Radio (FCC ID: I28-URFIDM5E) Limited Modular Approval. Power listed is the maximum conducted output power. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 10/03/2011 Application Dated: 10/03/2011 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernoin Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| C2PC for host MZ 220 & MZ 320 with new antenna This is a Limited Modular. Listed Power is maximum conducted RF output power. Compliance of this device in all two host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application Q5tgR8/2136UKBxSrx6+qg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 10/03/2011 Application Dated: 10/03/2011 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| C2PC for host MZ 220 & MZ 320 with new antenna This is a Limited Modular. Listed Power is maximum conducted RF output power. Compliance of this device in all two host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/13/2012 Application Dated: 06/13/2012 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernoin Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host(ZE500-4, ZE500-6). This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application OMSLAOBxCSab9wLhcPRqig==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 06/13/2012 Application Dated: 06/13/2012 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host(ZE500-4, ZE500-6). This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/03/2011 Application Dated: 03/03/2011 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernoin Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host (ZM400, ZM600) and Antenna. This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application o64npvQbcfNZ+++O6lFaNA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 03/03/2011 Application Dated: 03/03/2011 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host (ZM400, ZM600) and Antenna. This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 02/01/2011 Application Dated: 02/01/2011 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernoin Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host. This is a Limited Modular Approval. Power Output listed is Conducted. The host printer model is P4T. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Limited Single Modular |
EAS Grant - Application nuBN8KNeoUDQv6iqmTsCSQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 02/01/2011 Application Dated: 02/01/2011 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host. This is a Limited Modular Approval. Power Output listed is Conducted. The host printer model is P4T. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Limited Single Modular |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 09/16/2011 Application Dated: 09/16/2011 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernoin Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host MZ 220 & MZ 320. This is a Limited Modular. Listed Power is maximum conducted RF output power. Compliance of this device in all two host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance |
EAS Grant - Application N++u2kuRBJr2AKSfsCzbQQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 09/16/2011 Application Dated: 09/16/2011 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host MZ 220 & MZ 320. This is a Limited Modular. Listed Power is maximum conducted RF output power. Compliance of this device in all two host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/24/2011 Application Dated: 06/24/2011 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernoin Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| C2PC to add host GX420d, GX420t, GX430t with new antenna. This is a Limited Modular Approval. Listed Power is maximum conducted RF output power. The host printer models are QL220Plus, QL320Plus, Ql420PLus. Compliance of this device in all three host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application lGdtcnK8+wEjJx5TtUyE+A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 06/24/2011 Application Dated: 06/24/2011 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| C2PC to add host GX420d, GX420t, GX430t with new antenna. This is a Limited Modular Approval. Listed Power is maximum conducted RF output power. The host printer models are QL220Plus, QL320Plus, Ql420PLus. Compliance of this device in all three host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 01/04/2010 Application Dated: 01/04/2010 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernoin Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| This is a Limited Modular Approval. Listed Power is maximum conducted RF output power. The host printer models are QL220Plus, QL320Plus, Ql420PLus. Compliance of this device in all three host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application Ksr3OdgRA5mAFP9PSFEgIA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 01/04/2010 Application Dated: 01/04/2010 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| This is a Limited Modular Approval. Listed Power is maximum conducted RF output power. The host printer models are QL220Plus, QL320Plus, Ql420PLus. Compliance of this device in all three host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/03/2011 Application Dated: 03/03/2011 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernoin Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host (140Xi4, 170Xi4, 220Xi4) and Antenna. This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application K+1JCzXC0blpVHXsJeGf3g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 03/03/2011 Application Dated: 03/03/2011 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host (140Xi4, 170Xi4, 220Xi4) and Antenna. This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/03/2011 Application Dated: 03/03/2011 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernoin Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host (110Xi4) and Antenna. This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application goLVJgN/9umS4tImCb3flQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 03/03/2011 Application Dated: 03/03/2011 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host (110Xi4) and Antenna. This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 11/15/2012 Application Dated: 11/15/2012 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernoin Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| C2PC to Add New Host : 105SLPLus This is a Limited Modular Approval. Listed Power is maximum conducted RF output power. Compliance of this device in all three host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application EKpt8NZvGKHv1h8Cmj1MAw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 11/15/2012 Application Dated: 11/15/2012 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| C2PC to Add New Host : 105SLPLus This is a Limited Modular Approval. Listed Power is maximum conducted RF output power. Compliance of this device in all three host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/08/2011 Application Dated: 03/08/2011 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernoin Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host (PS4000) and Antenna. This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application BOnh7EzxpTb0rE/rI2PjdQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 03/08/2011 Application Dated: 03/08/2011 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host (PS4000) and Antenna. This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/03/2011 Application Dated: 03/03/2011 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernoin Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded 802.11b/g Radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host (110PAX4) and Antenna. This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 5Dw8+Obn964SllL4p7+F8w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 03/03/2011 Application Dated: 03/03/2011 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded 802.11b/g Radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host (110PAX4) and Antenna. This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 07/23/2012 Application Dated: 07/23/2012 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernoin Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host(HC100). This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 4KnQRFJEtkqxx6rmtpHraw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 07/23/2012 Application Dated: 07/23/2012 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-CXLAN11G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Zebra Embedded b/g radio |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.0098 |
| Class II Permissive Change filing for adding new Host(HC100). This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |