FCC ID I28MD-RW4137
802.11b COMPACT FLASH RADIO MODULE
by Zebra Technologies Corporation
Grantee Code: I28 Product Code: MDRW4137
Latest application date: 2006-02-24
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2006-02-24 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-10-31 |
| 2412-2462 MHz | Original Equipment | 2004-12-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2006-02-24 | PDF 15 KB |
| Users Manual | Users Manual | 2004-12-15 | PDF 3.3 MB |
| INTERNAL PHOTOS | Internal Photos | 2005-10-31 | PDF 79 KB |
| Internal Photos | Internal Photos | 2004-12-15 | PDF 739.8 KB |
| External Photos | External Photos | 2006-02-24 | PDF 412.5 KB |
| EXTERNAL PHOTOS | External Photos | 2005-10-31 | PDF 50.9 KB |
| External Photos | External Photos | 2004-12-15 | PDF 1.8 MB |
| Label Location and Sample | ID Label/Location Info | 2004-12-15 | PDF 661.3 KB |
| Test Setup Photos | Test Setup Photos | 2006-02-24 | PDF 575.5 KB |
| SAR TEST SETUP PHOTOS | Test Setup Photos | 2005-10-31 | PDF 188.1 KB |
| Test Setup Photos 1 | Test Setup Photos | 2004-12-15 | PDF 3.1 MB |
| Test Setup Photos 2 | Test Setup Photos | 2004-12-15 | PDF 2.7 MB |
| Test Report | Test Report | 2006-02-24 | PDF 204.5 KB |
| Test Report | Test Report | 2004-12-15 | PDF 587.9 KB |
| Agency | Cover Letter(s) | 2006-02-24 | PDF 158.1 KB |
| Change Letter | Cover Letter(s) | 2006-02-24 | PDF 151.7 KB |
| CLASS II CHANGE LETTER | Cover Letter(s) | 2005-10-31 | PDF 14.6 KB |
| CUSTOMER REPLY | Cover Letter(s) | 2005-10-31 | PDF 19.9 KB |
| Agency | Cover Letter(s) | 2004-12-15 | PDF 96 KB |
| Confidentiality | Cover Letter(s) | 2004-12-15 | PDF 93.4 KB |
| Models Covered by SAR | Cover Letter(s) | 2004-12-15 | PDF 276.3 KB |
| Modular Approval Letter | Cover Letter(s) | 2004-12-15 | PDF 18 KB |
| RF Exposure SAR | RF Exposure Info | 2006-02-24 | PDF 2.6 MB |
| DIPOLE CALIBRATIONS | RF Exposure Info | 2005-10-31 | PDF 348.5 KB |
| DIPOLE VALIDATIONS | RF Exposure Info | 2005-10-31 | PDF 298.3 KB |
| PROBE CALIBRATIONS | RF Exposure Info | 2005-10-31 | PDF 889.9 KB |
| SAR REPORT | RF Exposure Info | 2005-10-31 | PDF 355.5 KB |
| SAR TEST PLOTS | RF Exposure Info | 2005-10-31 | PDF 397.2 KB |
| RF Exposure Info SAR Report | RF Exposure Info | 2004-12-15 | PDF 2.4 MB |
| SAR Test Photos | RF Exposure Info | 2004-12-15 | PDF 2.4 MB |
| SAR Test Plots | RF Exposure Info | 2004-12-15 | PDF 734.8 KB |
| Block Diagram Metadata only | Block Diagram | PDF 19.3 KB | |
| Schematics Metadata only | Schematics | PDF 1.2 MB | |
| Description Metadata only | Operational Description | PDF 132.6 KB |
Application Information
| Application ID | iPtAx/7otxk2m0T+XpOVKQ== |
|---|---|
| Final Action Date | 2006-02-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006974851 |
| Model | MD-RW4137 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11b COMPACT FLASH RADIO MODULE |
| Responsible Party | Jay Cadiz, Sr. Manager, Regulatory, JCadiz@zebra.com  , 847-616-5806 |
| Technical Contact | Desmond Fraser, Rhein Tech, atcbinfo@rheintech.com  , 703-689-0368 |
| Test Firm | Rick McMurray, Rhein Tech Laboratories, Inc., FCCINFO@rheintech.com , 703-689-0368 |
| TCB Email | hotline@americantcb.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Modular Approval (LMA). Power Output listed is Conducted. Only the models associated with this LMA and shown in applications under this FCC ID are approved for use. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in certain filings given under the FCC ID. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR value is: Body 0.28 W/kg |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| iPtAx/7otxk2m0T+XpOVKQ== | 2006-02-24 | Class II permissive change or modification of presently authorized equipment |
| TgefctIvDxhrclNV7pOOjw== | 2005-10-31 | Class II permissive change or modification of presently authorized equipment |
| BNLSIybLjDF9uT5YJp+6Qg== | 2004-12-15 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.0960000 | 15C |
Grants
TCB Grant - Application TgefctIvDxhrclNV7pOOjw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/31/2005 Application Dated: 10/31/2005 |
| Zebra Technologies Corporation |
| 3 Overlook Point |
| LINCOLNSHIRE, IL 60069 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-RW4137 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b COMPACT FLASH RADIO MODULE |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.096 |
| Limited Modular Approval. This class 2 permissive change adds a specific host configuration. Only the models associated with this LMA are approved for use. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR value is: Body 0.28 W/kg |
EAS Grant - Application TgefctIvDxhrclNV7pOOjw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 3 Overlook Point LINCOLNSHIRE, IL 60069 United States |
Date of Grant: 10/31/2005 Application Dated: 10/31/2005 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-RW4137 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b COMPACT FLASH RADIO MODULE |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.096 |
| Limited Modular Approval. This class 2 permissive change adds a specific host configuration. Only the models associated with this LMA are approved for use. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in this filing. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR value is: Body 0.28 W/kg |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/24/2006 Application Dated: 02/23/2006 |
| Zebra Technologies Corporation |
| 3 Overlook Point |
| LINCOLNSHIRE, IL 60069 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-RW4137 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b COMPACT FLASH RADIO MODULE |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.096 |
| Limited Modular Approval (LMA). Power Output listed is Conducted. Only the models associated with this LMA and shown in applications under this FCC ID are approved for use. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in certain filings given under the FCC ID. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR value is: Body 0.28 W/kg |
EAS Grant - Application iPtAx/7otxk2m0T+XpOVKQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 3 Overlook Point LINCOLNSHIRE, IL 60069 United States |
Date of Grant: 02/24/2006 Application Dated: 02/23/2006 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-RW4137 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b COMPACT FLASH RADIO MODULE |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.096 |
| Limited Modular Approval (LMA). Power Output listed is Conducted. Only the models associated with this LMA and shown in applications under this FCC ID are approved for use. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except as evaluated in certain filings given under the FCC ID. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR value is: Body 0.28 W/kg |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/15/2004 Application Dated: 12/15/2004 |
| Zebra Technologies Corporation |
| 3 Overlook Point |
| LINCOLNSHIRE, IL 60069 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-RW4137 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b WLAN Radio w/Compact Flash Form Factor |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.096 |
| Limited Modular Approval. Only the models associated with this LMA are approved for use. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR value is: Body 0.062 W/kg |
EAS Grant - Application BNLSIybLjDF9uT5YJp+6Qg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 3 Overlook Point LINCOLNSHIRE, IL 60069 United States |
Date of Grant: 12/15/2004 Application Dated: 12/15/2004 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-RW4137 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b WLAN Radio w/Compact Flash Form Factor |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.096 |
| Limited Modular Approval. Only the models associated with this LMA are approved for use. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR value is: Body 0.062 W/kg |
| Mail To: |