FCC ID I28MD-ZBR5QLN
Zebra Embedded BT radio
by Zebra Technologies Corporation
Grantee Code: I28 Product Code: MDZBR5QLN
Latest application date: 2018-05-24
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-05-24 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2013-12-24 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2013-09-12 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2012-12-21 |
| 2402-2480 MHz | Original Equipment | 2011-03-29 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual 1 of 3 | Users Manual | 2011-03-29 | PDF 2.5 MB |
| User Manual 2 of 3 | Users Manual | 2011-03-29 | PDF 2.6 MB |
| User Manual 3 of 3 | Users Manual | 2011-03-29 | PDF 202.4 KB |
| Internal Photo | Internal Photos | 2018-05-24 | PDF 3.1 MB |
| EUT Internal Photos | Internal Photos | 2013-12-24 | PDF 122.3 KB |
| internal photo | Internal Photos | 2012-12-21 | PDF 189.3 KB |
| internal Photo | Internal Photos | 2011-03-29 | PDF 140.2 KB |
| External Photo | External Photos | 2018-05-24 | PDF 656.4 KB |
| EUT External Photos | External Photos | 2013-12-24 | PDF 186.1 KB |
| Host Printer Photos | External Photos | 2013-12-24 | PDF 418.5 KB |
| external photo | External Photos | 2012-12-21 | PDF 485.8 KB |
| External Photo | External Photos | 2011-03-29 | PDF 378 KB |
| label | ID Label/Location Info | 2011-03-29 | PDF 74.7 KB |
| Test Setup Photo | Test Setup Photos | 2018-05-24 | PDF 600.1 KB |
| Test Setup Photos | Test Setup Photos | 2013-12-24 | PDF 538 KB |
| RF Test Setup | Test Setup Photos | 2012-12-21 | PDF 198 KB |
| Setup Photo | Test Setup Photos | 2011-03-29 | PDF 112.9 KB |
| DSS Test Report | Test Report | 2018-05-24 | PDF 808.8 KB |
| BT RF Report | Test Report | 2013-12-24 | PDF 2.1 MB |
| Test Report | Test Report | 2013-09-12 | PDF 2.5 MB |
| RF test Report-1 | Test Report | 2012-12-21 | PDF 2 MB |
| RF test Report-2 | Test Report | 2012-12-21 | PDF 2 MB |
| RF test Report | Test Report | 2011-03-29 | PDF 2.1 MB |
| LMA Letter | Attestation Statements | 2011-03-29 | PDF 132.8 KB |
| LMA delaration | Attestation Statements | 2011-03-29 | PDF 54.4 KB |
| Class II Permissive Change Request Letter | Cover Letter(s) | 2018-05-24 | PDF 58.9 KB |
| Project and Product Certification Representative Authorization Letter | Cover Letter(s) | 2018-05-24 | PDF 151.3 KB |
| Authorization Letter | Cover Letter(s) | 2013-12-24 | PDF 97.7 KB |
| Permissive Change Request Letter | Cover Letter(s) | 2013-12-24 | PDF 89.6 KB |
| Authorization Letter | Cover Letter(s) | 2013-09-12 | PDF 134 KB |
| Permissive Change Request Letter | Cover Letter(s) | 2013-09-12 | PDF 115.6 KB |
| Authorization letter | Cover Letter(s) | 2012-12-21 | PDF 127.8 KB |
| C2PC Letter | Cover Letter(s) | 2012-12-21 | PDF 110.7 KB |
| Authorization letter | Cover Letter(s) | 2011-03-29 | PDF 59.9 KB |
| confidential Letter | Cover Letter(s) | 2011-03-29 | PDF 71.2 KB |
| MPE Calculation | RF Exposure Info | 2018-05-24 | PDF 71.3 KB |
| MPE Calculation | RF Exposure Info | 2013-12-24 | PDF 104.8 KB |
| MPE Calculation | RF Exposure Info | 2013-09-12 | PDF 53 KB |
| RF Exposure | RF Exposure Info | 2012-12-21 | PDF 42.3 KB |
| label | RF Exposure Info | 2011-03-29 | PDF 67.7 KB |
Application Information
| Application ID | y+VDE8Yqmy3LBP3UgRFntA== |
|---|---|
| Final Action Date | 2018-05-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006974851 |
| Model | MD-ZBR5QLN |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Zebra Embedded BT radio |
| Responsible Party | Jay Cadiz, Sr. Manager, Regulatory, JCadiz@zebra.com  , 847-616-5806 |
| Test Firm | Sarb Shelopal, Bureau Veritas Consumer Products Services, Inc., Sarbjit.Shelopal@bureauveritas.com  , +1 925 963 4420 |
| TCB Email | tcb@siemic.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC to add Host Card Printers (ZT410, ZT420) and to co-location with UHF RFID Radio (FCC ID: I28-RFIDM6EMTT). This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| y+VDE8Yqmy3LBP3UgRFntA== | 2018-05-24 | Class II permissive change or modification of presently authorized equipment |
| LzJjS0Y1hOSVKNGKmtVkbw== | 2013-12-24 | Class II permissive change or modification of presently authorized equipment |
| yLHWdM4ZfKh5G/Q+mc6pBw== | 2013-09-12 | Class II permissive change or modification of presently authorized equipment |
| DfszHkWAYSshKWYjNy0AbA== | 2012-12-21 | Class II permissive change or modification of presently authorized equipment |
| BA7kicZAqJefrm1zj8EzLA== | 2011-03-29 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0004000 | 15C |
Grants
TCB Grant - Application yLHWdM4ZfKh5G/Q+mc6pBw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 09/12/2013 Application Dated: 09/12/2013 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernoin Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-ZBR5QLN |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Zebra Embedded BT radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0004 |
| C2PC to operate simultaneously with N Radio in ZT400 series Printer (ZT410 , ZT420) This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application yLHWdM4ZfKh5G/Q+mc6pBw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 09/12/2013 Application Dated: 09/12/2013 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-ZBR5QLN |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Zebra Embedded BT radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0004 |
| C2PC to operate simultaneously with N Radio in ZT400 series Printer (ZT410 , ZT420) This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 05/24/2018 Application Dated: 05/24/2018 |
| Zebra Technologies Corporation |
| 3 Overlook Point |
| LINCOLNSHIRE, IL 60069 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-ZBR5QLN |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Zebra Embedded BT radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0004 |
| C2PC to add Host Card Printers (ZT410, ZT420) and to co-location with UHF RFID Radio (FCC ID: I28-RFIDM6EMTT). This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application y+VDE8Yqmy3LBP3UgRFntA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 3 Overlook Point LINCOLNSHIRE, IL 60069 United States |
Date of Grant: 05/24/2018 Application Dated: 05/24/2018 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-ZBR5QLN |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Zebra Embedded BT radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0004 |
| C2PC to add Host Card Printers (ZT410, ZT420) and to co-location with UHF RFID Radio (FCC ID: I28-RFIDM6EMTT). This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with accepted multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 12/24/2013 Application Dated: 12/24/2013 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernoin Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-ZBR5QLN |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Zebra Embedded BT radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0004 |
| C2PC with below conditions 1. Adding ZT400 Series (Models ZT410 and ZT420) host printers. 2. Will operate simultaneously with Zebra N Radio Module (FCC ID: I28MD-EXLAN11N) and Zebra UHF RFID Module M6e-MicroTT (FCC ID: 128-RFIDM6EMTT). Original Grant Comment: This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application LzJjS0Y1hOSVKNGKmtVkbw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 12/24/2013 Application Dated: 12/24/2013 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-ZBR5QLN |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Zebra Embedded BT radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0004 |
| C2PC with below conditions 1. Adding ZT400 Series (Models ZT410 and ZT420) host printers. 2. Will operate simultaneously with Zebra N Radio Module (FCC ID: I28MD-EXLAN11N) and Zebra UHF RFID Module M6e-MicroTT (FCC ID: 128-RFIDM6EMTT). Original Grant Comment: This is a Limited Modular Approval. Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 12/21/2012 Application Dated: 12/21/2012 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernoin Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-ZBR5QLN |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Zebra Embedded BT radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0004 |
| C2PC , adding new host : iMZ220, iMZ320 Limited Modular approval Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application DfszHkWAYSshKWYjNy0AbA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 12/21/2012 Application Dated: 12/21/2012 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-ZBR5QLN |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Zebra Embedded BT radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0004 |
| C2PC , adding new host : iMZ220, iMZ320 Limited Modular approval Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/29/2011 Application Dated: 03/29/2011 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernoin Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-ZBR5QLN |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Zebra Embedded BT radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0004 |
| This is a Limited Modular Approval. (Host : QLn220 , QLn320) Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application BA7kicZAqJefrm1zj8EzLA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 03/29/2011 Application Dated: 03/29/2011 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-ZBR5QLN |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Zebra Embedded BT radio |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0004 |
| This is a Limited Modular Approval. (Host : QLn220 , QLn320) Power Output listed is Conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. Instructions on installation of this module may not be provided to the end user. Only those antenna(s) tested with the device or similar antenna(s)with equal or lesser gain may be used with this transmitter and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |