FCC ID I28MD-ZLAN11B
802.11b Compact Flash Radio Module
by Zebra Technologies Corporation
Grantee Code: I28 Product Code: MDZLAN11B
Latest application date: 2006-02-21
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2006-02-21 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2006-02-15 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2005-09-27 |
| 2412-2462 MHz | Original Equipment | 2005-08-04 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2006-02-15 | PDF 74.8 KB |
| Revised Manual | Users Manual | 2005-08-04 | PDF 3.9 MB |
| Internal Photos | Internal Photos | 2005-08-04 | PDF 909.7 KB |
| External Photos | External Photos | 2006-02-21 | PDF 2.5 MB |
| External Photos | External Photos | 2006-02-15 | PDF 1.5 MB |
| Ext 1 | External Photos | 2005-08-04 | PDF 3 MB |
| Ext 2 | External Photos | 2005-08-04 | PDF 2.3 MB |
| Ext 3 | External Photos | 2005-08-04 | PDF 2.3 MB |
| Revised Label | ID Label/Location Info | 2005-08-04 | PDF 942 KB |
| Test Setup Photos | Test Setup Photos | 2006-02-21 | PDF 2.7 MB |
| Test Setup Photos | Test Setup Photos | 2006-02-15 | PDF 1.2 MB |
| SAR TEST SETUP PHOTO | RF Exposure Info | 2005-09-27 | PDF 188.3 KB |
| Setup 1 | Test Setup Photos | 2005-08-04 | PDF 3.4 MB |
| Setup 2 | Test Setup Photos | 2005-08-04 | PDF 3.1 MB |
| Setup 3 | Test Setup Photos | 2005-08-04 | PDF 3.1 MB |
| Test Report | Test Report | 2006-02-21 | PDF 330.4 KB |
| Test Report | Test Report | 2006-02-15 | PDF 527.8 KB |
| Test Report | Test Report | 2005-08-04 | PDF 647.4 KB |
| Agency | Cover Letter(s) | 2006-02-21 | PDF 185.2 KB |
| Change Description | Cover Letter(s) | 2006-02-21 | PDF 167.8 KB |
| Response Letter | Cover Letter(s) | 2006-02-21 | PDF 56.9 KB |
| Agency | Cover Letter(s) | 2006-02-15 | PDF 185.6 KB |
| Antenna Info | Cover Letter(s) | 2006-02-15 | PDF 111.1 KB |
| Permissive Change Letter | Cover Letter(s) | 2006-02-15 | PDF 165.3 KB |
| Response Letter | Cover Letter(s) | 2006-02-15 | PDF 56.4 KB |
| COVER LETTER | Cover Letter(s) | 2005-09-27 | PDF 8.7 KB |
| ATCB Comments | Cover Letter(s) | 2005-08-04 | PDF 49.4 KB |
| Agent Authorization | Cover Letter(s) | 2005-08-04 | PDF 78.3 KB |
| Confid Request | Cover Letter(s) | 2005-08-04 | PDF 78.6 KB |
| Response to ATCB | Cover Letter(s) | 2005-08-04 | PDF 61.3 KB |
| Revised NModular Approval Request | Cover Letter(s) | 2005-08-04 | PDF 13.5 KB |
| RF Exposure Antenna Specs | RF Exposure Info | 2006-02-21 | PDF 186.5 KB |
| RF Exposure Info | RF Exposure Info | 2006-02-21 | PDF 67.5 KB |
| RF Exposure Info | RF Exposure Info | 2006-02-15 | PDF 67.9 KB |
| DIPOLE CALIBRATION DATA | RF Exposure Info | 2005-09-27 | PDF 348.7 KB |
| DIPOLE VALIDATION PLOTS | RF Exposure Info | 2005-09-27 | PDF 322.6 KB |
| PROBE CALIBRATION DATA | RF Exposure Info | 2005-09-27 | PDF 890.2 KB |
| SAR REPORT | RF Exposure Info | 2005-09-27 | PDF 355.9 KB |
| SAR TEST DATA | RF Exposure Info | 2005-09-27 | PDF 449 KB |
| Antenna Position Installed | RF Exposure Info | 2005-08-04 | PDF 2.3 MB |
| Antenna Position Worn | RF Exposure Info | 2005-08-04 | PDF 2.6 MB |
| RF Exposure Information | RF Exposure Info | 2005-08-04 | PDF 69.3 KB |
| Block Metadata only | Block Diagram | PDF 56 KB | |
| Schema Metadata only | Schematics | PDF 91.1 KB | |
| Antenna Specs Metadata only | Operational Description | PDF 86.6 KB | |
| Op Descript Metadata only | Operational Description | PDF 164.2 KB |
Application Information
| Application ID | YqIygddbqMrWfAEqMrU1Xw== |
|---|---|
| Final Action Date | 2006-02-21 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006974851 |
| Model | MD-ZLAN11B |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11b Compact Flash Radio Module |
| Responsible Party | Jay Cadiz, Sr. Manager, Regulatory, JCadiz@zebra.com  , 847-616-5806 |
| Technical Contact | Desmond Fraser, Rhein Tech, atcbinfo@rheintech.com  , 703-689-0368 |
| Test Firm | Rick McMurray, Rhein Tech Laboratories, Inc., FCCINFO@rheintech.com , 703-689-0368 |
| TCB Email | hotline@americantcb.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Modular Approval (LMA). Power Output listed is Conducted. This transmitter module is authorized only for use in Zebra Technologies Corporation products. Use of external antennas are prohibited. The antenna used for this device must be installed to provide a separation distance of at least 25mm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance. In cases when a minimum 25mm separation cannot be maintained, SAR testing will be required. The OEM integrator must not provide any information to the end user regarding how to install or remove this RF module in any final product which shall utilize this module. SAR has been evaluated only for specific host configurations as shown in applicationsunder this FCC ID. SAR compliance for body-worn operations is restricted to belt-clips, holsters, and accessories supplied or designated for this product. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR value is: Body: 0.01W/kg |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| YqIygddbqMrWfAEqMrU1Xw== | 2006-02-21 | Class II permissive change or modification of presently authorized equipment |
| IiLaQapiR5PBxwgYvAmpwg== | 2006-02-15 | Class II permissive change or modification of presently authorized equipment |
| EwO1M2Gpb/x/tFAMz7F5+g== | 2005-09-27 | Class II permissive change or modification of presently authorized equipment |
| +QPQqA0QpEHlnpAwXKqAFQ== | 2005-08-04 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.0450000 | 15C |
Grants
TCB Grant - Application YqIygddbqMrWfAEqMrU1Xw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/21/2006 Application Dated: 02/17/2006 |
| Zebra Technologies Corporation |
| 3 Overlook Point |
| LINCOLNSHIRE, IL 60069 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-ZLAN11B |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b Compact Flash Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.045 |
| Limited Modular Approval (LMA). Power Output listed is Conducted. This transmitter module is authorized only for use in Zebra Technologies Corporation products. Use of external antennas are prohibited. The antenna used for this device must be installed to provide a separation distance of at least 25mm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance. In cases when a minimum 25mm separation cannot be maintained, SAR testing will be required. The OEM integrator must not provide any information to the end user regarding how to install or remove this RF module in any final product which shall utilize this module. SAR has been evaluated only for specific host configurations as shown in applicationsunder this FCC ID. SAR compliance for body-worn operations is restricted to belt-clips, holsters, and accessories supplied or designated for this product. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR value is: Body: 0.01W/kg |
EAS Grant - Application YqIygddbqMrWfAEqMrU1Xw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 3 Overlook Point LINCOLNSHIRE, IL 60069 United States |
Date of Grant: 02/21/2006 Application Dated: 02/17/2006 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-ZLAN11B |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b Compact Flash Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.045 |
| Limited Modular Approval (LMA). Power Output listed is Conducted. This transmitter module is authorized only for use in Zebra Technologies Corporation products. Use of external antennas are prohibited. The antenna used for this device must be installed to provide a separation distance of at least 25mm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance. In cases when a minimum 25mm separation cannot be maintained, SAR testing will be required. The OEM integrator must not provide any information to the end user regarding how to install or remove this RF module in any final product which shall utilize this module. SAR has been evaluated only for specific host configurations as shown in applicationsunder this FCC ID. SAR compliance for body-worn operations is restricted to belt-clips, holsters, and accessories supplied or designated for this product. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR value is: Body: 0.01W/kg |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/15/2006 Application Dated: 02/10/2006 |
| Zebra Technologies Corporation |
| 3 Overlook Point |
| LINCOLNSHIRE, IL 60069 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-ZLAN11B |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b Compact Flash Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.045 |
| Limited Modular Approval (LMA). Power Output listed is Conducted. This transmitter module is authorized only for use in Zebra Technologies Corporation products. Use of external antennas are prohibited. The antenna used for this device must be installed to provide a separation distance of at least 25mm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance. In cases when a minimum 25mm separation cannot be maintained, SAR testing will be required. The OEM integrator must not provide any information to the end user regarding how to install or remove this RF module in any final product which shall utilize this module. SAR has been evaluated only for specific host configurations as shown in applications under this FCC ID. SAR compliance for body-worn operations is restricted to belt-clips, holsters, and accessories supplied or designated for this product. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR value is: Body: 0.01W/kg |
EAS Grant - Application IiLaQapiR5PBxwgYvAmpwg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 3 Overlook Point LINCOLNSHIRE, IL 60069 United States |
Date of Grant: 02/15/2006 Application Dated: 02/10/2006 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-ZLAN11B |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b Compact Flash Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.045 |
| Limited Modular Approval (LMA). Power Output listed is Conducted. This transmitter module is authorized only for use in Zebra Technologies Corporation products. Use of external antennas are prohibited. The antenna used for this device must be installed to provide a separation distance of at least 25mm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance. In cases when a minimum 25mm separation cannot be maintained, SAR testing will be required. The OEM integrator must not provide any information to the end user regarding how to install or remove this RF module in any final product which shall utilize this module. SAR has been evaluated only for specific host configurations as shown in applications under this FCC ID. SAR compliance for body-worn operations is restricted to belt-clips, holsters, and accessories supplied or designated for this product. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR value is: Body: 0.01W/kg |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/27/2005 Application Dated: 09/27/2005 |
| Zebra Technologies Corporation |
| 3 Overlook Point |
| LINCOLNSHIRE, IL 60069 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-ZLAN11B |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b COMPACT FLASH RADIO MODULE |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.045 |
| Limited Modular Approval (LMA). Power Output listed is Conducted. This transmitter module is authorized only for use in Zebra Technologies Corporation products. Use of external antennas are prohibited. The antenna used for this device must be installed to provide a separation distance of at least 25mm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance. In cases when a minimum 25mm separation cannot be maintained, SAR testing will be required. The OEM integrator must not provide any information to the end user regarding how to install or remove this RF module in any final product which shall utilize this module.
This Class II permissive change adds a specific host. SAR compliance for body-worn T operations is restricted to belt-clips, holsters, and accessories supplied or designated for this product. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR value is: Body: 0.01W/kg |
EAS Grant - Application EwO1M2Gpb/x/tFAMz7F5+g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 3 Overlook Point LINCOLNSHIRE, IL 60069 United States |
Date of Grant: 09/27/2005 Application Dated: 09/27/2005 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-ZLAN11B |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b COMPACT FLASH RADIO MODULE |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.045 |
| Limited Modular Approval (LMA). Power Output listed is Conducted. This transmitter module is authorized only for use in Zebra Technologies Corporation products. Use of external antennas are prohibited. The antenna used for this device must be installed to provide a separation distance of at least 25mm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance. In cases when a minimum 25mm separation cannot be maintained, SAR testing will be required. The OEM integrator must not provide any information to the end user regarding how to install or remove this RF module in any final product which shall utilize this module.
This Class II permissive change adds a specific host. SAR compliance for body-worn T operations is restricted to belt-clips, holsters, and accessories supplied or designated for this product. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR value is: Body: 0.01W/kg |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/04/2005 Application Dated: 08/04/2005 |
| Zebra Technologies Corporation |
| 3 Overlook Point |
| LINCOLNSHIRE, IL 60069 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-ZLAN11B |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b Compact Flash Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.045 |
| Limited Modular Approval (LMA). Power Output listed is Conducted. This transmitter module is authorized only for use in Zebra Technologies Corporation products. Use of external antennas are prohibited. The antenna used for this device must be installed to provide a separation distance of at least 25mm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance. In cases when a minimum 25mm separation cannot be maintained, SAR testing will be required. The OEM integrator must not provide any information to the end user regarding how to install or remove this RF module in any final product which shall utilize this module. |
EAS Grant - Application +QPQqA0QpEHlnpAwXKqAFQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 3 Overlook Point LINCOLNSHIRE, IL 60069 United States |
Date of Grant: 08/04/2005 Application Dated: 08/04/2005 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28MD-ZLAN11B |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b Compact Flash Radio Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.045 |
| Limited Modular Approval (LMA). Power Output listed is Conducted. This transmitter module is authorized only for use in Zebra Technologies Corporation products. Use of external antennas are prohibited. The antenna used for this device must be installed to provide a separation distance of at least 25mm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and OEM integrators must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF Exposure compliance. In cases when a minimum 25mm separation cannot be maintained, SAR testing will be required. The OEM integrator must not provide any information to the end user regarding how to install or remove this RF module in any final product which shall utilize this module. |
| Mail To: |