FCC ID I28RFID-M2HF

I28-RFID-M2HF, I28 RFIDM2HF, I28RFID-M2HF, I28RF1D-M2HF, 128RF1D-M2HF

Zebra Technologies Corporation RFID Printer Module RFID-M2HF

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: I28RFID-M2HF is I28. The remaining characters of the FCC ID, RFID-M2HF, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: RFID Printer Module

Application: RFID Printer Module
Equipment Class: DXT - Part 15 Low Power Transceiver, Rx Verified
Short Link: fcc.id/I28RFID-M2HF
Sources: FCC.gov | FCC.report
Registered By: Zebra Technologies Corporation - I28 (United States)

App #	Purpose	Date	Unique ID
1	Original Equipment	2006-08-17	HVA34alDgmZCX84VJYvGBA==

Operating Frequencies

Frequency Range	Tolerance	Rule Parts	Line Entry
13.56 MHz	0.0100000000%	15C	1

Exhibits

Document	Type	Submitted Available
RF Exposure Info MPE	RF Exposure Info Adobe Acrobat PDF (28 kB)	2006-08-22 2006-08-17
User Manual	Users Manual Adobe Acrobat PDF (3152 kB)	2006-08-17 2006-08-17
Test Setup Photos	Test Setup Photos Adobe Acrobat PDF (634 kB)	2006-08-17 2006-08-17
Test Report	Test Report Adobe Acrobat PDF (1888 kB)	2006-08-17 2006-08-17
RF Exposure Info	RF Exposure Info Adobe Acrobat PDF (66 kB)	2006-08-17 2006-08-17
Label and Location	ID Label/Location Info Adobe Acrobat PDF (103 kB)	2006-08-17 2006-08-17
Internal Photos	Internal Photos Adobe Acrobat PDF (414 kB)	2006-08-17 2006-08-17
External Photos	External Photos Adobe Acrobat PDF (414 kB)	2006-08-17 2006-08-17
Confidentiality	Cover Letter(s) Adobe Acrobat PDF (83 kB)	2006-08-17 2006-08-17
Authorization Letter	Cover Letter(s) Adobe Acrobat PDF (158 kB)	2006-08-17 2006-08-17
Agency	Cover Letter(s) Adobe Acrobat PDF (24 kB)	2006-08-17 2006-08-17
Cover Letter	Cover Letter(s) Adobe Acrobat PDF (14 kB)	2006-08-17 2006-08-17
Spec Sheet	Cover Letter(s) Adobe Acrobat PDF (390 kB)	2006-08-17 2006-08-17
Modular Approval Letter	Cover Letter(s) Adobe Acrobat PDF (16 kB)	2006-08-17 2006-08-17
Schematics	Schematics Adobe Acrobat PDF (128 kB)	2006-08-17
Descritpion	Operational Description Adobe Acrobat PDF (72 kB)	2006-08-17
Block Diagram	Block Diagram Adobe Acrobat PDF (45 kB)	2006-08-17

Correspondence

App #	Document	Date
1	[Re-Sent]Audit Completed Email generated [Aug 23 2006]
1	[Re-Sent]RT Email Correspondence generated [Aug 22 2006]
1	Incoming Correspondence generated [Aug 22 2006]
1	Incoming Correspondence generated [Aug 22 2006]

Application Forms

1 (2006-08-17)

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	Zebra Technologies Corporation
FCC Registration Number (FRN):	0006304075
Alphanumeric FCC ID:	I28RFIDM2HF
Unique Application Identifier:	HVA34alDgmZCX84VJYvGBA==
Line one:	333 Corporate Woods Parkway
City:	Vernoin Hills
State:	Illinois
Country:	United States
Zip Code:	60061

TCB Information

TCB Application Email Address:	hotline@americantcb.com
TCB Scope:	A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices

FCC ID

Grantee Code:	I28
Product Code:	RFID-M2HF

Person at the applicant's address to receive grant or for contact

Name:	Charles A Derrow
Title:	Manager, Compliance Engineering

Telephone Number:

847-793-5719

Extension:

Fax Number:	847-821-1795
Email:	cderrow@zebra.com

Technical Contact

Firm Name:	DLS Electronic Systems
First Name:	Arnie
Last Name:	Rowe
Line 1:	1250 Peterson Drive
City:	Wheeling
State:	Illinois
Country:	United States
Zip Code:	60090

Telephone Number:

847-537-6400

Extension:

Fax Number:	847-537-6488
E-Mail:	arowe@dlsemc.com

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: No

If so, specify the short-term confidentiality release date (MM/DD/YYYY format):
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: DXT - Part 15 Low Power Transceiver, Rx Verified
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	RFID Printer Module

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Single Modular Approval

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: DLS Electronic Systems, Inc.

First Name: William

Last Name: Stumpf

Telephone Number:

847-537-6400

Extension:

Fax Number: 847-537-6488

E-mail: bstumpf@dlsemc.com

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Modular Approval. Approval is limited to applicant installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Applicant integrators must be provided with antenna installation instructions and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is used by the applicant and applicant must ensure that the end user has no manual instructions to remove or install the device.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: Arnom C. Rowe

Title of authorized signature:

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 08/17/2006

Application Dated: 08/17/2006

Zebra Technologies Corporation

333 Corporate Woods Parkway

Vernoin Hills, IL 60061

Attention: Charles Derrow , Manager, Compliance Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	I28RFID-M2HF

Name of Grantee:	Zebra Technologies Corporation

Equipment Class:	Part 15 Low Power Transceiver, Rx Verified
Notes:	RFID Printer Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	13.56 - 13.56		0.01 %

Modular Approval. Approval is limited to applicant installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Applicant integrators must be provided with antenna installation instructions and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is used by the applicant and applicant must ensure that the end user has no manual instructions to remove or install the device.

FCC ID I28RFID-M2HF

I28-RFID-M2HF, I28 RFIDM2HF, I28RFID-M2HF, I28RF1D-M2HF, 128RF1D-M2HF

Zebra Technologies Corporation RFID Printer Module RFID-M2HF

Purchase on Amazon: RFID Printer Module

Operating Frequencies

Exhibits

Correspondence

Application Forms

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details