FCC ID I28RFID-M4E-01
Multiprotocol RFID Encoder
by Zebra Technologies Corporation
Grantee Code: I28 Product Code: RFIDM4E01
Latest application date: 2007-11-01
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.967-927.233 MHz | Class II permissive change or modification of presently authorized equipment | 2007-11-01 |
| 902.967-927.233 MHz | Class II permissive change or modification of presently authorized equipment | 2006-11-27 |
| 902.967-927.233 MHz | Class II permissive change or modification of presently authorized equipment | 2006-10-25 |
| 902.967-927.233 MHz | Original Equipment | 2005-07-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| New Users Manual PCII | Users Manual | 2006-11-27 | PDF 2.8 MB |
| Users Manual AX4 Part 1 | Users Manual | 2005-07-31 | PDF 1.2 MB |
| Users Manual AX4 Part 2 | Users Manual | 2005-07-31 | PDF 2.7 MB |
| Users Manual R110 | Users Manual | 2005-07-31 | PDF 2.8 MB |
| Users Manual R4M Part 1 | Users Manual | 2005-07-31 | PDF 2.9 MB |
| Users Manual R4M Part 2 | Users Manual | 2005-07-31 | PDF 1.1 MB |
| Internal Photos | Internal Photos | 2006-11-27 | PDF 328.7 KB |
| Internal Photos | Internal Photos | 2006-10-25 | PDF 88.1 KB |
| Coupler Atnenna Photos | Internal Photos | 2005-07-31 | PDF 266.7 KB |
| Internal Photos | Internal Photos | 2005-07-31 | PDF 880.8 KB |
| External Photos | External Photos | 2005-07-31 | PDF 137.1 KB |
| Label and Location | ID Label/Location Info | 2005-07-31 | PDF 94.4 KB |
| Schematics HE01 Metadata only | Test Report | 2005-07-31 | PDF 338.1 KB |
| Operational Description | Operational Description | 2006-11-27 | PDF 13.1 KB |
| Op Description | Operational Description | 2006-10-25 | PDF 13.1 KB |
| Description | Operational Description | 2005-07-31 | PDF 11.7 KB |
| Test Setup Photos | Test Setup Photos | 2005-07-31 | PDF 1.6 MB |
| Test Report | Test Report | 2006-11-27 | PDF 715.6 KB |
| Test Report | Test Report | 2006-10-25 | PDF 1.1 MB |
| Test Report Part 1 | Test Report | 2005-07-31 | PDF 3 MB |
| Test Report Part 2 | Test Report | 2005-07-31 | PDF 2.7 MB |
| Test Report Part 3 | Test Report | 2005-07-31 | PDF 2.7 MB |
| Agent ltr | Cover Letter(s) | 2007-11-01 | PDF 142.5 KB |
| C2PC Cvr Ltr | Cover Letter(s) | 2007-11-01 | PDF 13.2 KB |
| Co Request ltr | Cover Letter(s) | 2007-11-01 | PDF 142.5 KB |
| Authorization Letter | Cover Letter(s) | 2006-11-27 | PDF 19.3 KB |
| Class II Letter | Cover Letter(s) | 2006-11-27 | PDF 124.7 KB |
| Confidentiality | Cover Letter(s) | 2006-11-27 | PDF 23.2 KB |
| Cover Letter | Cover Letter(s) | 2006-11-27 | PDF 54.9 KB |
| Authorization | Cover Letter(s) | 2006-10-25 | PDF 17.6 KB |
| Authorization Letter | Cover Letter(s) | 2006-10-25 | PDF 47.7 KB |
| Change Letter | Cover Letter(s) | 2006-10-25 | PDF 120.4 KB |
| Confidentiality | Cover Letter(s) | 2006-10-25 | PDF 23.8 KB |
| Cover Letter | Cover Letter(s) | 2006-10-25 | PDF 15.6 KB |
| Authorization Letter | Cover Letter(s) | 2005-07-31 | PDF 46 KB |
| Confidentiality | Cover Letter(s) | 2005-07-31 | PDF 130.5 KB |
| Cover Letter | Cover Letter(s) | 2005-07-31 | PDF 68.6 KB |
| Modular Apporval Request | Cover Letter(s) | 2005-07-31 | PDF 60.5 KB |
| Co RFx Eval | RF Exposure Info | 2007-11-01 | PDF 15.4 KB |
| RF Exposure MPE | RF Exposure Info | 2005-07-31 | PDF 73.9 KB |
| Block Diagram Metadata only | Block Diagram | PDF 97.2 KB | |
| Schematics Metadata only | Schematics | PDF 126 KB | |
| Schematics Metadata only | Schematics | PDF 147.1 KB | |
| Schematics CWD Metadata only | Schematics | PDF 424.8 KB | |
| Schematics with changes Metadata only | Schematics | PDF 77 KB |
Application Information
| Application ID | rlx/m9iicDKvY3Z+ZHIQRg== |
|---|---|
| Final Action Date | 2007-11-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006304075 |
| Model | RFID-M4E-01 |
| Frequency Range | 902.967-927.233 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Multiprotocol RFID Encoder |
| Responsible Party | Charles A Derrow, Manager, Compliance Engineering, cderrow@zebra.com  , 847-793-5719 |
| Technical Contact | Arnom Rowe, DLS Electronic Systems Inc, 647 537 6400 |
| Test Firm | William Stumpf, DLS Electronic Systems, Inc., bstumpf@dlsemc.com  , 847-537-6400 |
| TCB Email | hotline@atcb.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific RFID printer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has been evaluated for co-location with FCC ID I28RFID-402931. The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device except as shown in applications under this FCC ID. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| rlx/m9iicDKvY3Z+ZHIQRg== | 2007-11-01 | Class II permissive change or modification of presently authorized equipment |
| vMbTjJuTlF/DQvf5EhiWSw== | 2006-11-27 | Class II permissive change or modification of presently authorized equipment |
| SgdTo5CbdQ9/L7rbuAC7Xg== | 2006-10-25 | Class II permissive change or modification of presently authorized equipment |
| 920WJ01IMDh9utBQc6AbRQ== | 2005-07-31 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.967-927.233 MHz | 0.8190000 | 15C |
Grants
TCB Grant - Application vMbTjJuTlF/DQvf5EhiWSw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/27/2006 Application Dated: 11/27/2006 |
| Zebra Technologies Corporation |
| 3 Overlook Point |
| LINCOLNSHIRE, IL 60069 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28RFID-M4E-01 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Multiprotocol RFID Encoder |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.967 - 927.233 | 0.819 |
| Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific RFID printer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements. |
EAS Grant - Application vMbTjJuTlF/DQvf5EhiWSw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 3 Overlook Point LINCOLNSHIRE, IL 60069 United States |
Date of Grant: 11/27/2006 Application Dated: 11/27/2006 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28RFID-M4E-01 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Multiprotocol RFID Encoder |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.967 - 927.233 | 0.819 |
| Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific RFID printer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 10/25/2006 Application Dated: 10/24/2006 |
| Zebra Technologies Corporation |
| 3 Overlook Point |
| LINCOLNSHIRE, IL 60069 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28RFID-M4E-01 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Multiprotocol RFID Encoder |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.967 - 927.233 | 0.819 |
| Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific RFID printer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements. |
EAS Grant - Application SgdTo5CbdQ9/L7rbuAC7Xg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 3 Overlook Point LINCOLNSHIRE, IL 60069 United States |
Date of Grant: 10/25/2006 Application Dated: 10/24/2006 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28RFID-M4E-01 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Multiprotocol RFID Encoder |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.967 - 927.233 | 0.819 |
| Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific RFID printer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/01/2007 Application Dated: 10/31/2007 |
| Zebra Technologies Corporation |
| 333 Corporate Woods Parkway |
| Vernoin Hills, IL 60061 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28RFID-M4E-01 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Multiprotocol RFID Encoder |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.967 - 927.233 | 0.819 |
| Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific RFID printer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has been evaluated for co-location with FCC ID I28RFID-402931. The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device except as shown in applications under this FCC ID. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements. |
EAS Grant - Application rlx/m9iicDKvY3Z+ZHIQRg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 11/01/2007 Application Dated: 10/31/2007 |
| Attention: Charles Derrow , Manager, Compliance Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28RFID-M4E-01 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Multiprotocol RFID Encoder |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.967 - 927.233 | 0.819 |
| Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific RFID printer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has been evaluated for co-location with FCC ID I28RFID-402931. The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device except as shown in applications under this FCC ID. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/31/2005 Application Dated: 07/31/2005 |
| Zebra Technologies Corporation |
| 3 Overlook Point |
| LINCOLNSHIRE, IL 60069 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28RFID-M4E-01 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Multiprotocol RFID Encoder |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.967 - 927.233 | 0.819 |
| Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific RFID printer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.
|
EAS Grant - Application 920WJ01IMDh9utBQc6AbRQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 3 Overlook Point LINCOLNSHIRE, IL 60069 United States |
Date of Grant: 07/31/2005 Application Dated: 07/31/2005 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28RFID-M4E-01 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Multiprotocol RFID Encoder |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.967 - 927.233 | 0.819 |
| Power Output is Conducted. Limited Modular Approval. The wireless card listed within this application is to be installed only in the specific RFID printer(s) shown in filings under this FCC ID. Approval is limited to Grantee or OEM installation only. This device is approved for use in products operating as a mobile transmitting device with respect to 2.1091. MPE compliance was demonstrated with the antenna configurations as shown in filings under this FCC ID. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) must not be co-located or operating in conjunction with any other antenna or radio transmitter within the host device. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and installers must be provided with operating instructions for satisfying RF exposure compliance requirements.
|
| Mail To: |