FCC ID I28RFID-Z4M-01
Wireless Industrial/Comercial Tag Printer
by Zebra Technologies Corporation
Grantee Code: I28 Product Code: RFIDZ4M01
Latest application date: 2004-09-16
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.8-927.6 MHz | Class II permissive change or modification of presently authorized equipment | 2004-09-16 |
| 902.8-927.6 MHz | Original Equipment | 2004-03-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual | Users Manual | 2004-03-17 | PDF 2.7 MB |
| Internal photos | Internal Photos | 2004-09-16 | PDF 256.9 KB |
| Internal Photos | Internal Photos | 2004-03-17 | PDF 1 MB |
| External photos | External Photos | 2004-09-16 | PDF 256.9 KB |
| External Photos | External Photos | 2004-03-17 | PDF 984.7 KB |
| Lable Plate | ID Label/Location Info | 2004-03-17 | PDF 96.4 KB |
| Location | ID Label/Location Info | 2004-03-17 | PDF 137.9 KB |
| Hopping Table | Operational Description | 2004-03-17 | PDF 26.8 KB |
| Operational Description | Operational Description | 2004-03-17 | PDF 58.3 KB |
| Test Setup | Test Setup Photos | 2004-03-17 | PDF 300.6 KB |
| Test report revised | Test Report | 2004-09-16 | PDF 1.8 MB |
| Revised Test Report | Test Report | 2004-03-17 | PDF 1.2 MB |
| ATCB comments | Cover Letter(s) | 2004-09-16 | PDF 17.5 KB |
| Compliance statement | Cover Letter(s) | 2004-09-16 | PDF 60.3 KB |
| POA | Cover Letter(s) | 2004-09-16 | PDF 84.1 KB |
| Reason for PC2 1 | Cover Letter(s) | 2004-09-16 | PDF 43.2 KB |
| Reason for PC2 2 | Cover Letter(s) | 2004-09-16 | PDF 79.4 KB |
| Letter of Authorization | Cover Letter(s) | 2004-03-17 | PDF 140.5 KB |
| Letters including Confid | Cover Letter(s) | 2004-03-17 | PDF 71.1 KB |
| Xtal Freqs | Cover Letter(s) | 2004-03-17 | PDF 43.6 KB |
| RF Exposure | RF Exposure Info | 2004-03-17 | PDF 13.7 KB |
| Block Metadata only | Block Diagram | PDF 44 KB | |
| Schema Metadata only | Schematics | PDF 154.1 KB | |
| Parts List 1 Metadata only | Parts List/Tune Up Info | PDF 18.4 KB | |
| Parts List 2 Metadata only | Parts List/Tune Up Info | PDF 310.6 KB |
Application Information
| Application ID | hkDylXYMSedl5mPJd/OkWg== |
|---|---|
| Final Action Date | 2004-09-16 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0006974851 |
| Model | RFID-Z4M-01 |
| Frequency Range | 902.8-927.6 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Wireless Industrial/Comercial Tag Printer |
| Responsible Party | Jay Cadiz, Sr. Manager, Regulatory, JCadiz@zebra.com  , 847-616-5806 |
| Agent | Arnom Arnom Arnom, D.L.S. Electronic Systems, Inc., arowe@dlsemc.com  , 847 537 6400 |
| Technical Contact | Arnom Rowe, D.L.S Electronic Systems, Inc., arowe@dlsemc.com , 847 537 6400 |
| Test Firm | Brian Mattson, D.L.S. Electronic Systems, Inc., bmattson@dlsemc.com , 8475376400 |
| TCB Email | hotline@americantcb.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| hkDylXYMSedl5mPJd/OkWg== | 2004-09-16 | Class II permissive change or modification of presently authorized equipment |
| GQjZMZuLN1VMGQ8G4Ajrpw== | 2004-03-17 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application hkDylXYMSedl5mPJd/OkWg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/16/2004 Application Dated: 09/16/2004 |
| Zebra Technologies Corporation |
| 3 Overlook Point |
| LINCOLNSHIRE, IL 60069 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28RFID-Z4M-01 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Industrial/Comercial Tag Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.8 - 927.6 | 0.38 |
| Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application hkDylXYMSedl5mPJd/OkWg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 3 Overlook Point LINCOLNSHIRE, IL 60069 United States |
Date of Grant: 09/16/2004 Application Dated: 09/16/2004 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28RFID-Z4M-01 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Industrial/Comercial Tag Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.8 - 927.6 | 0.38 |
| Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/17/2004 Application Dated: 03/17/2004 |
| Zebra Technologies Corporation |
| 3 Overlook Point |
| LINCOLNSHIRE, IL 60069 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28RFID-Z4M-01 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Industrial/Comercial Tag Printer |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 902.8 - 927.6 | 0.38 |
| Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application GQjZMZuLN1VMGQ8G4Ajrpw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 3 Overlook Point LINCOLNSHIRE, IL 60069 United States |
Date of Grant: 03/17/2004 Application Dated: 03/17/2004 |
| Attention: Jay Cadiz , Sr. Manager, Regulatory |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I28RFID-Z4M-01 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless Industrial/Comercial Tag Printer |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 902.8 - 927.6 | 0.38 |
| Power Output listed is Conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: |