FCC ID I28-ZLANGVH
I28ZLANGVH, I28 ZLANGVH, I28-ZLANGVH, 128-ZLANGVH
Zebra Technologies Corporation Zebra Embedded 802.11b/g Radio ZLANGVH
An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product.
For example, the grantee code for FCC ID: I28-ZLANGVH is I28. The remaining characters of the FCC ID, -ZLANGVH, are often associated with the product model, but they can be random. These letters are chosen by the applicant.
In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.
Purchase on Amazon:
Zebra Embedded 802.11b/g Radio
- Application: Zebra Embedded 802.11b/g Radio
- Equipment Class: DTS - Digital Transmission System
- Short Link: fcc.id/I28-ZLANGVH
- Sources: FCC.gov | FCC.report
- Registered By: Zebra Technologies Corporation - I28 (United States)
App # | Purpose | Date | Unique ID |
---|---|---|---|
1 | Original Equipment | 2008-02-22 | wDmvVU7O1WyVXqYZSKiqUA== |
2 | Class II Permissive Change | 2009-03-05 | pxcjSrO09zQZYY6t+ERCTg== |
3 | Class II Permissive Change | 2010-05-07 | QXZ4k+88KigjTJY9l0/5zA== |
Operating Frequencies
Frequency Range | Power Output | Rule Parts | App # |
---|---|---|---|
2.412-2.462 GHz ![]() | 30.9 mW | 15C | 2.1 |
2.412-2.462 GHz ![]() | 30.9 mW | 15C | 3.1 |
2.412-2.462 GHz ![]() | 30.9 mW | 15C | 1.1 |
Exhibits
Available Exhibits
App # | Document | Type | Submitted Available |
---|---|---|---|
3 | RF Setup Photo | Test Setup Photos Adobe Acrobat PDF (52 kB) |
2010-05-07 2010-05-07 |
3 | Colocation EMC report | Test Report Adobe Acrobat PDF (1077 kB) |
2010-05-07 2010-05-07 |
3 | RF Exposure Info MPE | RF Exposure Info Adobe Acrobat PDF (59 kB) |
2010-05-07 2010-05-07 |
3 | PCII Letter | Cover Letter(s) Adobe Acrobat PDF (128 kB) |
2010-05-07 2010-05-07 |
3 | Authorization letter | Cover Letter(s) Adobe Acrobat PDF (15 kB) |
2010-05-07 2010-05-07 |
2 | User Manual Part 3 of 3 | Users Manual Adobe Acrobat PDF (1716 kB) |
2009-03-05 2009-03-05 |
2 | User Manual Part 2 of 3 | Users Manual Adobe Acrobat PDF (2601 kB) |
2009-03-05 2009-03-05 |
2 | User Manual Part 1 of 3 | Users Manual Adobe Acrobat PDF (2401 kB) |
2009-03-05 2009-03-05 |
2 | FCC Auth Letter | Cover Letter(s) Adobe Acrobat PDF (110 kB) |
2009-03-05 2009-03-05 |
2 | MPE Calculation | RF Exposure Info Adobe Acrobat PDF (59 kB) |
2009-03-05 2009-03-05 |
2 | Test Report | Test Report Adobe Acrobat PDF (1263 kB) |
2009-03-05 2009-03-05 |
2 | Label Location | ID Label/Location Info Adobe Acrobat PDF (847 kB) |
2009-03-05 2009-03-05 |
2 | Label Drawing | ID Label/Location Info Adobe Acrobat PDF (87 kB) |
2009-03-05 2009-03-05 |
2 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (302 kB) |
2009-03-05 2009-03-05 |
2 | Internal Photos | Internal Photos Adobe Acrobat PDF (93 kB) |
2009-03-05 2009-03-05 |
2 | External Photos | External Photos Adobe Acrobat PDF (1248 kB) |
2009-03-05 2009-03-05 |
2 | PCII Request Letter | Cover Letter(s) Adobe Acrobat PDF (17 kB) |
2009-03-05 2009-03-05 |
1 | Limited Modular Request Letter | Cover Letter(s) Adobe Acrobat PDF (218 kB) |
2008-02-22 2008-02-22 |
1 | FCC Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (105 kB) |
2008-02-22 2008-02-22 |
1 | Confidential Request Letter | Cover Letter(s) Adobe Acrobat PDF (118 kB) |
2008-02-22 2008-02-22 |
1 | Antenna Information | Cover Letter(s) Adobe Acrobat PDF (22 kB) |
2008-02-22 2008-02-22 |
1 | External Photo | External Photos Adobe Acrobat PDF (1409 kB) |
2008-02-22 2008-02-22 |
1 | FCC ID Label Location | ID Label/Location Info Adobe Acrobat PDF (51 kB) |
2008-02-22 2008-02-22 |
1 | FCC ID Label | ID Label/Location Info Adobe Acrobat PDF (8 kB) |
2008-02-22 2008-02-22 |
1 | Internal Photos | Internal Photos Adobe Acrobat PDF (230 kB) |
2008-02-22 2008-02-22 |
1 | Test Report | Test Report Adobe Acrobat PDF (2337 kB) |
2008-02-22 2008-02-22 |
1 | Test Setup Photo | Test Setup Photos Adobe Acrobat PDF (411 kB) |
2008-02-22 2008-02-22 |
1 | User Manual | Users Manual Adobe Acrobat PDF (2272 kB) |
2008-02-22 2008-02-22 |
APP # 3 (2010-05-07)
App # | Document | Type | Submitted Available |
---|---|---|---|
3 | RF Setup Photo | Test Setup Photos Adobe Acrobat PDF (52 kB) |
2010-05-07 00:00:00 2010-05-07 00:00:00 |
3 | Colocation EMC report | Test Report Adobe Acrobat PDF (1077 kB) |
2010-05-07 00:00:00 2010-05-07 00:00:00 |
3 | RF Exposure Info MPE | RF Exposure Info Adobe Acrobat PDF (59 kB) |
2010-05-07 00:00:00 2010-05-07 00:00:00 |
3 | PCII Letter | Cover Letter(s) Adobe Acrobat PDF (128 kB) |
2010-05-07 00:00:00 2010-05-07 00:00:00 |
3 | Authorization letter | Cover Letter(s) Adobe Acrobat PDF (15 kB) |
2010-05-07 00:00:00 2010-05-07 00:00:00 |
APP # 2 (2009-03-05)
App # | Document | Type | Submitted Available |
---|---|---|---|
2 | User Manual Part 3 of 3 | Users Manual Adobe Acrobat PDF (1716 kB) |
2009-03-05 00:00:00 2009-03-05 00:00:00 |
2 | User Manual Part 2 of 3 | Users Manual Adobe Acrobat PDF (2601 kB) |
2009-03-05 00:00:00 2009-03-05 00:00:00 |
2 | User Manual Part 1 of 3 | Users Manual Adobe Acrobat PDF (2401 kB) |
2009-03-05 00:00:00 2009-03-05 00:00:00 |
2 | FCC Auth Letter | Cover Letter(s) Adobe Acrobat PDF (110 kB) |
2009-03-05 00:00:00 2009-03-05 00:00:00 |
2 | MPE Calculation | RF Exposure Info Adobe Acrobat PDF (59 kB) |
2009-03-05 00:00:00 2009-03-05 00:00:00 |
2 | Test Report | Test Report Adobe Acrobat PDF (1263 kB) |
2009-03-05 00:00:00 2009-03-05 00:00:00 |
2 | Label Location | ID Label/Location Info Adobe Acrobat PDF (847 kB) |
2009-03-05 00:00:00 2009-03-05 00:00:00 |
2 | Label Drawing | ID Label/Location Info Adobe Acrobat PDF (87 kB) |
2009-03-05 00:00:00 2009-03-05 00:00:00 |
2 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (302 kB) |
2009-03-05 00:00:00 2009-03-05 00:00:00 |
2 | Internal Photos | Internal Photos Adobe Acrobat PDF (93 kB) |
2009-03-05 00:00:00 2009-03-05 00:00:00 |
2 | External Photos | External Photos Adobe Acrobat PDF (1248 kB) |
2009-03-05 00:00:00 2009-03-05 00:00:00 |
2 | PCII Request Letter | Cover Letter(s) Adobe Acrobat PDF (17 kB) |
2009-03-05 00:00:00 2009-03-05 00:00:00 |
APP # 1 (2008-02-22)
App # | Document | Type | Submitted Available |
---|---|---|---|
1 | Limited Modular Request Letter | Cover Letter(s) Adobe Acrobat PDF (218 kB) |
2008-02-22 00:00:00 2008-02-22 00:00:00 |
1 | FCC Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (105 kB) |
2008-02-22 00:00:00 2008-02-22 00:00:00 |
1 | Confidential Request Letter | Cover Letter(s) Adobe Acrobat PDF (118 kB) |
2008-02-22 00:00:00 2008-02-22 00:00:00 |
1 | Antenna Information | Cover Letter(s) Adobe Acrobat PDF (22 kB) |
2008-02-22 00:00:00 2008-02-22 00:00:00 |
1 | External Photo | External Photos Adobe Acrobat PDF (1409 kB) |
2008-02-22 00:00:00 2008-02-22 00:00:00 |
1 | FCC ID Label Location | ID Label/Location Info Adobe Acrobat PDF (51 kB) |
2008-02-22 00:00:00 2008-02-22 00:00:00 |
1 | FCC ID Label | ID Label/Location Info Adobe Acrobat PDF (8 kB) |
2008-02-22 00:00:00 2008-02-22 00:00:00 |
1 | Internal Photos | Internal Photos Adobe Acrobat PDF (230 kB) |
2008-02-22 00:00:00 2008-02-22 00:00:00 |
1 | Test Report | Test Report Adobe Acrobat PDF (2337 kB) |
2008-02-22 00:00:00 2008-02-22 00:00:00 |
1 | Test Setup Photo | Test Setup Photos Adobe Acrobat PDF (411 kB) |
2008-02-22 00:00:00 2008-02-22 00:00:00 |
1 | User Manual | Users Manual Adobe Acrobat PDF (2272 kB) |
2008-02-22 00:00:00 2008-02-22 00:00:00 |
1 | Schematic | Schematics Adobe Acrobat PDF (281 kB) |
2008-02-22 00:00:00 N/A |
1 | Operational Description | Operational Description Adobe Acrobat PDF (106 kB) |
2008-02-22 00:00:00 N/A |
1 | Block Diagram | Block Diagram Adobe Acrobat PDF (106 kB) |
2008-02-22 00:00:00 N/A |
Application Forms
Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Applications are submitted for FCC ID and Grant requests. Click an above application to view details
Grants
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/05/2009 |
Zebra Technologies Corporation |
333 Corporate Woods Parkway |
Vernoin Hills, IL 60061 |
Attention: Charles Derrow , Manager, Compliance Engineering |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | I28-ZLANGVH |
Name of Grantee: | Zebra Technologies Corporation |
Equipment Class: | Digital Transmission System |
Notes: | Zebra Embedded 802.11b/g Radio |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
15C | 2412.0 - 2462.0 | 0.0309 |
Limited Modular Approval. Power listed is the maximum combined peak conducted output power. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The test hosts are 110Xi4, 140Xi4, 170Xi4, 220Xi4. |
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 03/05/2009 |
Attention: Charles Derrow , Manager, Compliance Engineering |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | I28-ZLANGVH |
Name of Grantee: | Zebra Technologies Corporation |
Equipment Class: | Digital Transmission System |
Notes: | Zebra Embedded 802.11b/g Radio |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
15C | 2412.0 - 2462.0 | 0.0309 |
Limited Modular Approval. Power listed is the maximum combined peak conducted output power. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The test hosts are 110Xi4, 140Xi4, 170Xi4, 220Xi4. |
Mail To: |
EA382549 |
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 05/07/2010 |
Zebra Technologies Corporation |
333 Corporate Woods Parkway |
Vernoin Hills, IL 60061 |
Attention: Charles Derrow , Manager, Compliance Engineering |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | I28-ZLANGVH |
Name of Grantee: | Zebra Technologies Corporation |
Equipment Class: | Digital Transmission System |
Notes: | Zebra Embedded 802.11b/g radio |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
15C | 2412.0 - 2462.0 | 0.0309 |
Limited Modular Approval. PCII for Co-location of M5e UHF RFID radio. Power listed is the maximum combined peak conducted output power. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The test hosts are 110Xi4/R110Xi4. |
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 05/07/2010 |
Attention: Charles Derrow , Manager, Compliance Engineering |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | I28-ZLANGVH |
Name of Grantee: | Zebra Technologies Corporation |
Equipment Class: | Digital Transmission System |
Notes: | Zebra Embedded 802.11b/g radio |
Modular Type: | Does not apply |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
15C | 2412.0 - 2462.0 | 0.0309 |
Limited Modular Approval. PCII for Co-location of M5e UHF RFID radio. Power listed is the maximum combined peak conducted output power. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The test hosts are 110Xi4/R110Xi4. |
Mail To: |
EA164563 |
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 02/22/2008 |
Zebra Technologies Corporation |
333 Corporate Woods Parkway |
Vernoin Hills, IL 60061 |
Attention: Charles Derrow , Manager, Compliance Engineering |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | I28-ZLANGVH |
Name of Grantee: | Zebra Technologies Corporation |
Equipment Class: | Digital Transmission System |
Notes: | Zebra Embedded 802.11b/g radio |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
15C | 2412.0 - 2462.0 | 0.0309 |
Limited Modular Approval. Power listed is the maximum combined peak conducted output power. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The test hosts are 110XiIII, ZM400, ZM600, S4M. |
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
Zebra Technologies Corporation 333 Corporate Woods Parkway Vernoin Hills, IL 60061 United States |
Date of Grant: 02/22/2008 |
Attention: Charles Derrow , Manager, Compliance Engineering |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | I28-ZLANGVH |
Name of Grantee: | Zebra Technologies Corporation |
Equipment Class: | Digital Transmission System |
Notes: | Zebra Embedded 802.11b/g radio |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
15C | 2412.0 - 2462.0 | 0.0309 |
Limited Modular Approval. Power listed is the maximum combined peak conducted output power. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The test hosts are 110XiIII, ZM400, ZM600, S4M. |
Mail To: |
EA752526 |