FCC ID I2ILR9553

GPS for Bluetooth

by Leadtek Research Inc

Grantee Code: I2I   Product Code: LR9553
Latest application date: 2005-04-01

FCC ID Device Details

FCC IDI2ILR9553
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeI2I
Product CodeLR9553
Applicant BusinessLeadtek Research Inc 🇹🇼
Related Domains leadtek.com.tw
Equipment ClassGPS for Bluetooth
Test FirmCompliance Certification Services Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2005-04-01
2402-2480 MHzOriginal Equipment2004-11-12

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2004-11-12PDF 1,009 KB
Internal PhotosInternal Photos2004-11-12PDF 380.9 KB
External PhotosExternal Photos2005-04-01PDF 362 KB
External PhotosExternal Photos2004-11-12PDF 378.1 KB
ID Label Location InfoID Label/Location Info2004-11-12PDF 30.9 KB
Test Setup PhotosTest Setup Photos2005-04-01PDF 390.1 KB
Test Setup PhotosTest Setup Photos2004-11-12PDF 420.7 KB
Test ReportTest Report2005-04-01PDF 1.1 MB
Test ReportTest Report2004-11-12PDF 1.8 MB
Class II permissive change cover letterCover Letter(s)2005-04-01PDF 21 KB
Agent Authorization LetterCover Letter(s)2004-11-12PDF 35.9 KB
Request for Confidentiality LetterCover Letter(s)2004-11-12PDF 45.3 KB
TCB Q and ACover Letter(s)2004-11-12PDF 13.8 KB
Block Diagram Metadata onlyBlock DiagramPDF 7.9 KB
Schematics Metadata onlySchematicsPDF 2 MB
Operational Description Metadata onlyOperational DescriptionPDF 223.2 KB

Application Information

Application IDrEkxJDMF8yI/35RIKJEdTw==
Final Action Date2005-04-01
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0009565896
ModelLR9553
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionGPS for Bluetooth
Responsible PartyRu Huang, Section Manager, ru@leadtek.com.tw , 886-2-8226-5800
Test FirmKurt Chen, Compliance Certification Services Inc., kurt_chen@ccsemc.com.tw , 886-2-86422071
TCB EmailMKUO@CCSEMC.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II permissive change filing. Power Output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
rEkxJDMF8yI/35RIKJEdTw==2005-04-01Class II permissive change or modification of presently authorized equipment
9K/mNMLqRJ5XO66gAIHjzA==2004-11-12Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.002400015C

Grants

TCB Grant - Application rEkxJDMF8yI/35RIKJEdTw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 04/01/2005

Application Dated: 04/01/2005
Leadtek Research Inc
18F, No. 166, Chien-Yi Rd, Chung-Ho
Taipei Hsien, 235
Taiwan
 
Attention: Ru Huang , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  I2ILR9553
Name of Grantee:  Leadtek Research Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: GPS for Bluetooth
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0024  

Class II permissive change filing. Power Output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application rEkxJDMF8yI/35RIKJEdTw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Leadtek Research Inc
18F, No. 166, Chien-Yi Rd, Chung-Ho
Taipei Hsien, 235
Taiwan
  Date of Grant: 04/01/2005

Application Dated: 04/01/2005
 
Attention: Ru Huang , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  I2ILR9553
Name of Grantee:  Leadtek Research Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: GPS for Bluetooth
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0024  

Class II permissive change filing. Power Output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application 9K/mNMLqRJ5XO66gAIHjzA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 11/12/2004

Application Dated: 11/12/2004
Leadtek Research Inc
18F, No. 166, Chien-Yi Rd, Chung-Ho
Taipei Hsien, 235
Taiwan
 
Attention: Ru Huang , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  I2ILR9553
Name of Grantee:  Leadtek Research Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: GPS with Bluetooth
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0024  

Power Output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 9K/mNMLqRJ5XO66gAIHjzA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Leadtek Research Inc
18F, No. 166, Chien-Yi Rd, Chung-Ho
Taipei Hsien, 235
Taiwan
  Date of Grant: 11/12/2004

Application Dated: 11/12/2004
 
Attention: Ru Huang , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  I2ILR9553
Name of Grantee:  Leadtek Research Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: GPS with Bluetooth
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0024  

Power Output listed is conducted. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: