FCC ID I4L-MS6820
Wireless 11g MiniPCI Card
by Micro-Star Int'l Co.,Ltd.
Grantee Code: I4L Product Code: MS6820
Latest application date: 2004-02-06
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2004-02-06 |
| 2412-2462 MHz | Original Equipment | 2003-09-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| USERS MANUAL 1 | Users Manual | 2004-02-06 | PDF 1.7 MB |
| USERS MANUAL 2 | Users Manual | 2004-02-06 | PDF 3.4 MB |
| USERS MANUAL 3 | Users Manual | 2004-02-06 | PDF 2.2 MB |
| USERS MANUAL 4 | Users Manual | 2004-02-06 | PDF 2.3 MB |
| users manual 1 | Users Manual | 2003-09-08 | PDF 2.1 MB |
| users manual 2 | Users Manual | 2003-09-08 | PDF 3.7 MB |
| users manual 3 | Users Manual | 2003-09-08 | PDF 2.2 MB |
| users manual 4 | Users Manual | 2003-09-08 | PDF 2.3 MB |
| INTERNAL PHOTOS | Internal Photos | 2004-02-06 | PDF 39.1 KB |
| internal photos | Internal Photos | 2003-09-08 | PDF 106.8 KB |
| EXTERNAL PHOTOS | External Photos | 2004-02-06 | PDF 93.2 KB |
| external photos | External Photos | 2003-09-08 | PDF 104.6 KB |
| ID LABEL SAMPLE AND LOCATION | ID Label/Location Info | 2004-02-06 | PDF 47.3 KB |
| label sample and location | ID Label/Location Info | 2003-09-08 | PDF 47.3 KB |
| BLOCK DIAGRAM | Block Diagram | 2004-02-06 | PDF 22 KB |
| BLOCK DIAGRAM | Block Diagram | 2003-09-08 | PDF 15.1 KB |
| SCHEMAITCS | Schematics | 2004-02-06 | PDF 109.3 KB |
| schematics | Schematics | 2003-09-08 | PDF 109.3 KB |
| OPERATIONAL DESCRIPTION | Operational Description | 2004-02-06 | PDF 62.9 KB |
| 888E antenna spec 1to20 | Operational Description | 2003-09-08 | PDF 1.4 MB |
| 888E antenna spec 21to30 | Operational Description | 2003-09-08 | PDF 1.6 MB |
| 888E antenna spec 31to40 | Operational Description | 2003-09-08 | PDF 2 MB |
| 888E antenna spec 41to45 | Operational Description | 2003-09-08 | PDF 671.8 KB |
| 888E antenna spec 46to50 | Operational Description | 2003-09-08 | PDF 2.7 MB |
| 888E antenna spec 51to60 | Operational Description | 2003-09-08 | PDF 2.1 MB |
| 888E antenna spec 61to67 | Operational Description | 2003-09-08 | PDF 1.7 MB |
| ANTENNA SPECS 1 TO 20 Metadata only | Operational Description | 2003-09-08 | PDF 1.4 MB |
| ANTENNA SPECS 21 TO 30 Metadata only | Operational Description | 2003-09-08 | PDF 1.6 MB |
| D500P antenna spec 16to30 | Operational Description | 2003-09-08 | PDF 2.8 MB |
| D500P antenna spec 1to15 | Operational Description | 2003-09-08 | PDF 2 MB |
| D500P antenna spec 31to40 | Operational Description | 2003-09-08 | PDF 2 MB |
| D500P antenna spec 41to43 | Operational Description | 2003-09-08 | PDF 2.4 MB |
| D500P antenna spec 44to54 | Operational Description | 2003-09-08 | PDF 1.5 MB |
| LP297 antenna spec 1to30 | Operational Description | 2003-09-08 | PDF 2.7 MB |
| LP297 antenna spec 31to41 | Operational Description | 2003-09-08 | PDF 2.2 MB |
| LP297 antenna spec 42to46 | Operational Description | 2003-09-08 | PDF 720.5 KB |
| LP297 antenna spec 47to52 | Operational Description | 2003-09-08 | PDF 2.9 MB |
| LP297 antenna spec 53to63 | Operational Description | 2003-09-08 | PDF 2.1 MB |
| M300 antenna spec | Operational Description | 2003-09-08 | PDF 493.5 KB |
| operational description | Operational Description | 2003-09-08 | PDF 59 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2004-02-06 | PDF 55.1 KB |
| test setup photos | Test Setup Photos | 2003-09-08 | PDF 238.3 KB |
| ANTENNA INFO | Test Report | 2004-02-06 | PDF 183 KB |
| TEST REPORT | Test Report | 2004-02-06 | PDF 2.8 MB |
| revised test report | Test Report | 2003-09-08 | PDF 1.8 MB |
| test report Metadata only | Test Report | 2003-09-08 | PDF 2.3 MB |
| CLASS II CHANGE LETTER | Cover Letter(s) | 2004-02-06 | PDF 73.8 KB |
Application Information
| Application ID | aGG1+UxpyAsdb2evGZSjnw== |
|---|---|
| Final Action Date | 2004-02-06 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007127640 |
| Model | MS6820 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wireless 11g MiniPCI Card |
| Responsible Party | Frank Hsiao, section manager, frankhsiao@msi.com  , +886-2-3434-5599 |
| Test Firm | Linda Chiang, Spectrum Research & Testing Lab., srtlab@ms17.hinet.net  , 886-3-498-7684 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Limited Module Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The instruction manual furnished with the intentional radiator shall contain language in the installation instructions informing the operator and the installer of this responsibility. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| aGG1+UxpyAsdb2evGZSjnw== | 2004-02-06 | Class II permissive change or modification of presently authorized equipment |
| Ct6Aw/hs+gLEV41qzjVxww== | 2003-09-08 | Original Equipment |
Grants
TCB Grant - Application Ct6Aw/hs+gLEV41qzjVxww==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/08/2003 Application Dated: 09/08/2003 |
| Micro-Star Int'l Co.,Ltd. |
| No.69, Lide St., Zhonghe Dist. |
| New Taipei City 235, 235 Taiwan |
| Attention: Frank Hsiao , section manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I4L-MS6820 |
| Name of Grantee: | Micro-Star Int'l Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless 11g MiniPCI Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.023 |
| Limited Module Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The instruction manual furnished with the intentional radiator shall contain language in the installation instructions informing the operator and the installer of this responsibility. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application Ct6Aw/hs+gLEV41qzjVxww==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Micro-Star Int'l Co.,Ltd. No.69, Lide St., Zhonghe Dist. New Taipei City 235, 235 Taiwan |
Date of Grant: 09/08/2003 Application Dated: 09/08/2003 |
| Attention: Frank Hsiao , section manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I4L-MS6820 |
| Name of Grantee: | Micro-Star Int'l Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless 11g MiniPCI Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.023 |
| Limited Module Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The instruction manual furnished with the intentional radiator shall contain language in the installation instructions informing the operator and the installer of this responsibility. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/06/2004 Application Dated: 02/06/2004 |
| Micro-Star Int'l Co.,Ltd. |
| No.69, Lide St., Zhonghe Dist. |
| New Taipei City 235, 235 Taiwan |
| Attention: Frank Hsiao , section manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I4L-MS6820 |
| Name of Grantee: | Micro-Star Int'l Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless 11g MiniPCI Card |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.023 |
| Limited Module Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The instruction manual furnished with the intentional radiator shall contain language in the installation instructions informing the operator and the installer of this responsibility. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
EAS Grant - Application aGG1+UxpyAsdb2evGZSjnw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Micro-Star Int'l Co.,Ltd. No.69, Lide St., Zhonghe Dist. New Taipei City 235, 235 Taiwan |
Date of Grant: 02/06/2004 Application Dated: 02/06/2004 |
| Attention: Frank Hsiao , section manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I4L-MS6820 |
| Name of Grantee: | Micro-Star Int'l Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless 11g MiniPCI Card |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CE | 15C | 2412.0 - 2462.0 | 0.023 |
| Limited Module Approval. Power Output listed is conducted. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators must be provided with antenna installation instructions. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The instruction manual furnished with the intentional radiator shall contain language in the installation instructions informing the operator and the installer of this responsibility. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CE: | This device has shown compliance with the conducted emissions limits in 15.107, 15.207, or 18.307 adopted under FCC 02-157 (ET Docket 98-80). The device may be marketed after July 11, 2005, and is not affected by the 15.37(j) or 18.123 transition provisions. |
| Mail To: |