FCC ID I4L-MWH540S
WiFi/BT Module
by Micro-Star Int'l Co.,Ltd.
Grantee Code: I4L Product Code: MWH540S
Latest application date: 2025-01-16
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-01-16 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2025-01-16 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-01-16 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AJVQ-MWH540S Grant Date: 04/30/2024 | 2024-12-17 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AJVQ-MWH540S Grant Date: 04/30/2024 | 2024-12-17 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AJVQ-MWH540S Grant Date: 04/30/2024 | 2024-12-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| internal photos | Internal Photos | 2025-01-16 | PDF 636.9 KB |
| External photos | External Photos | 2025-01-16 | PDF 788.8 KB |
| I4L-MWH540S_EUT External Photos Rev.2 | External Photos | 2024-12-17 | PDF 795.7 KB |
| I4L-MWH540S Label | ID Label/Location Info | 2024-12-17 | PDF 48.8 KB |
| test setup photos | Test Setup Photos | 2025-01-16 | PDF 476 KB |
| BLE test report | Test Report | 2025-01-16 | PDF 2 MB |
| WIFI 2.4G test report | Test Report | 2025-01-16 | PDF 2.3 MB |
| antenna specification | Test Report | 2025-01-16 | PDF 1 MB |
| antenna specification | Test Report | 2025-01-16 | PDF 840.2 KB |
| antenna specification_1 | Test Report | 2025-01-16 | PDF 840.2 KB |
| antenna specification_2 | Test Report | 2025-01-16 | PDF 1 MB |
| test report | Test Report | 2025-01-16 | PDF 1.7 MB |
| test report | Test Report | 2025-01-16 | PDF 3.5 MB |
| Attestation Section 2.911(d)(5)(i)&(ii) | Attestation Statements | 2025-01-16 | PDF 404.4 KB |
| US Agent letter | Attestation Statements | 2025-01-16 | PDF 173.4 KB |
| ACB FORM FCC Application Letters Covered List Attestation Rev1 | Attestation Statements | 2024-12-17 | PDF 305.6 KB |
| I4L-MWH540S Agent Letter | Attestation Statements | 2024-12-17 | PDF 173.4 KB |
| C2PC Application Letter | Cover Letter(s) | 2025-01-16 | PDF 126.4 KB |
| POA letter | Cover Letter(s) | 2025-01-16 | PDF 106.4 KB |
| confidentiality letter | Cover Letter(s) | 2025-01-16 | PDF 114 KB |
| I4L-MWH540S Agency Letter | Cover Letter(s) | 2024-12-17 | PDF 142.7 KB |
| I4L-MWH540S FCC Change in ID cover letter 2 | Cover Letter(s) | 2024-12-17 | PDF 66 KB |
| I4L-MWH540S FCC change in ID cover letter 1 | Cover Letter(s) | 2024-12-17 | PDF 27.7 KB |
| Letter Metadata only | Cover Letter(s) | 2024-12-17 | PDF 195.3 KB |
| RF exposure report | RF Exposure Info | 2025-01-16 | PDF 956.2 KB |
| operation description Metadata only | Operational Description | PDF 670.5 KB |
Application Information
| Application ID | i06DRn732B1m7BL8AdcbNg== |
|---|---|
| Final Action Date | 2025-01-16 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0007127640 |
| Model | MWH540S |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WiFi/BT Module |
| Responsible Party | Frank Hsiao, section manager, frankhsiao@msi.com  , +886-2-3434-5599 |
| Test Firm | George Luo, Shenzhen UnionTrust Quality and Technology Co., Lt, quality@uttlab.com  , +86-755-28230888 |
| TCB Email | TEI@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power is maximum peak conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device supports WIFI 802.11 b/g/n/ax20 and 40 MHz channel bandwidth and 2T2R MIMO. This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID. Class II Permissive Change: Change from IPEX pull-out antenna to a Tube antenna, as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| i06DRn732B1m7BL8AdcbNg== | 2025-01-16 | Class II permissive change or modification of presently authorized equipment |
| ekC1+Sq7yPdHndamWD4tIQ== | 2025-01-16 | Class II permissive change or modification of presently authorized equipment |
| dbuBZhc62tTnADT+zT8FNw== | 2025-01-16 | Class II permissive change or modification of presently authorized equipment |
| vDO/3rVFE2a0/cf+g1YKZA== | 2024-12-17 | Change in identification of presently authorized equipment. Original FCC ID: 2AJVQ-MWH540S Grant Date: 04/30/2024 |
| kponS6mlC7vZn2h6783P5A== | 2024-12-17 | Change in identification of presently authorized equipment. Original FCC ID: 2AJVQ-MWH540S Grant Date: 04/30/2024 |
| 8t4xt8KfREKVU59oXN52Nw== | 2024-12-17 | Change in identification of presently authorized equipment. Original FCC ID: 2AJVQ-MWH540S Grant Date: 04/30/2024 |
Equipment Authorization
Grants
TCB Grant - Application vDO/3rVFE2a0/cf+g1YKZA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 12/17/2024 Application Dated: 12/13/2024 |
| Micro-Star Int'l Co.,Ltd. |
| No.69, Lide St., Zhonghe Dist. |
| New Taipei City 235, 235 Taiwan |
| Attention: Frank Hsiao , section manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I4L-MWH540S |
| Name of Grantee: | Micro-Star Int'l Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.478 |
| Output power is maximum peak conducted. This device supports WIFI 802.11 b/g/n/ax20 and 40 MHz channel bandwidth. This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID. This device supports 2T2R MIMO. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application vDO/3rVFE2a0/cf+g1YKZA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Micro-Star Int'l Co.,Ltd. No.69, Lide St., Zhonghe Dist. New Taipei City 235, 235 Taiwan |
Date of Grant: 12/17/2024 Application Dated: 12/13/2024 |
| Attention: Frank Hsiao , section manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I4L-MWH540S |
| Name of Grantee: | Micro-Star Int'l Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.478 |
| Output power is maximum peak conducted. This device supports WIFI 802.11 b/g/n/ax20 and 40 MHz channel bandwidth. This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID. This device supports 2T2R MIMO. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 12/17/2024 Application Dated: 12/13/2024 |
| Micro-Star Int'l Co.,Ltd. |
| No.69, Lide St., Zhonghe Dist. |
| New Taipei City 235, 235 Taiwan |
| Attention: Frank Hsiao , section manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I4L-MWH540S |
| Name of Grantee: | Micro-Star Int'l Co.,Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.057 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.061 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.056 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.059 |
| Output power is maximum average conducted. This device supports IEEE 802.11 a/n/ac/ax 20, 40 and 80 MHz channel bandwidths. This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID. This device supports 2T2R MIMO. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application kponS6mlC7vZn2h6783P5A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Micro-Star Int'l Co.,Ltd. No.69, Lide St., Zhonghe Dist. New Taipei City 235, 235 Taiwan |
Date of Grant: 12/17/2024 Application Dated: 12/13/2024 |
| Attention: Frank Hsiao , section manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I4L-MWH540S |
| Name of Grantee: | Micro-Star Int'l Co.,Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.057 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.061 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.056 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.059 |
| Output power is maximum average conducted. This device supports IEEE 802.11 a/n/ac/ax 20, 40 and 80 MHz channel bandwidths. This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID. This device supports 2T2R MIMO. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 01/16/2025 Application Dated: 01/16/2025 |
| Micro-Star Int'l Co.,Ltd. |
| No.69, Lide St., Zhonghe Dist. |
| New Taipei City 235, 235 Taiwan |
| Attention: Frank Hsiao , section manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I4L-MWH540S |
| Name of Grantee: | Micro-Star Int'l Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.478 |
| Output power is maximum peak conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device supports WIFI 802.11 b/g/n/ax20 and 40 MHz channel bandwidth and 2T2R MIMO. This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID. Class II Permissive Change: Change from IPEX pull-out antenna to a Tube antenna, as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application i06DRn732B1m7BL8AdcbNg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Micro-Star Int'l Co.,Ltd. No.69, Lide St., Zhonghe Dist. New Taipei City 235, 235 Taiwan |
Date of Grant: 01/16/2025 Application Dated: 01/16/2025 |
| Attention: Frank Hsiao , section manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I4L-MWH540S |
| Name of Grantee: | Micro-Star Int'l Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.478 |
| Output power is maximum peak conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device supports WIFI 802.11 b/g/n/ax20 and 40 MHz channel bandwidth and 2T2R MIMO. This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID. Class II Permissive Change: Change from IPEX pull-out antenna to a Tube antenna, as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 01/16/2025 Application Dated: 01/16/2025 |
| Micro-Star Int'l Co.,Ltd. |
| No.69, Lide St., Zhonghe Dist. |
| New Taipei City 235, 235 Taiwan |
| Attention: Frank Hsiao , section manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I4L-MWH540S |
| Name of Grantee: | Micro-Star Int'l Co.,Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.057 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.061 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.056 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.059 |
| Output power is maximum average conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device supports IEEE 802.11 a/n/ac/ax 20, 40 and 80 MHz channel bandwidths and 2T2R MIMO. This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application ekC1+Sq7yPdHndamWD4tIQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Micro-Star Int'l Co.,Ltd. No.69, Lide St., Zhonghe Dist. New Taipei City 235, 235 Taiwan |
Date of Grant: 01/16/2025 Application Dated: 01/16/2025 |
| Attention: Frank Hsiao , section manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I4L-MWH540S |
| Name of Grantee: | Micro-Star Int'l Co.,Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.057 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.061 | ||
| CC MO | 15E | 5500.0 - 5700.0 | 0.056 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.059 |
| Output power is maximum average conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device supports IEEE 802.11 a/n/ac/ax 20, 40 and 80 MHz channel bandwidths and 2T2R MIMO. This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 01/16/2025 Application Dated: 01/16/2025 |
| Micro-Star Int'l Co.,Ltd. |
| No.69, Lide St., Zhonghe Dist. |
| New Taipei City 235, 235 Taiwan |
| Attention: Frank Hsiao , section manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I4L-MWH540S |
| Name of Grantee: | Micro-Star Int'l Co.,Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Output power is maximum peak conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID. Class II Permissive Change: Change from IPEX pull-out antenna to a Tube antenna, as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application dbuBZhc62tTnADT+zT8FNw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Micro-Star Int'l Co.,Ltd. No.69, Lide St., Zhonghe Dist. New Taipei City 235, 235 Taiwan |
Date of Grant: 01/16/2025 Application Dated: 01/16/2025 |
| Attention: Frank Hsiao , section manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I4L-MWH540S |
| Name of Grantee: | Micro-Star Int'l Co.,Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi/BT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Output power is maximum peak conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID. Class II Permissive Change: Change from IPEX pull-out antenna to a Tube antenna, as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 12/17/2024 Application Dated: 12/13/2024 |
| Micro-Star Int'l Co.,Ltd. |
| No.69, Lide St., Zhonghe Dist. |
| New Taipei City 235, 235 Taiwan |
| Attention: Frank Hsiao , section manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I4L-MWH540S |
| Name of Grantee: | Micro-Star Int'l Co.,Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WIFI/BT module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Output power is maximum peak conducted. This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 8t4xt8KfREKVU59oXN52Nw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Micro-Star Int'l Co.,Ltd. No.69, Lide St., Zhonghe Dist. New Taipei City 235, 235 Taiwan |
Date of Grant: 12/17/2024 Application Dated: 12/13/2024 |
| Attention: Frank Hsiao , section manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | I4L-MWH540S |
| Name of Grantee: | Micro-Star Int'l Co.,Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WIFI/BT module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.007 |
| Output power is maximum peak conducted. This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |