FCC ID IA9XPD2400A
2400MHz Data Tranceiver Module
by COOPER INDUSTRIES (ELECTRICAL) INC
Grantee Code: IA9 Product Code: XPD2400A
Latest application date: 2023-10-17
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2403.1-2479.8 MHz | Class II permissive change or modification of presently authorized equipment | 2023-10-17 |
| 2403.1-2479.8 MHz | Class II permissive change or modification of presently authorized equipment | 2023-05-18 |
| 2403.1-2479.8 MHz | Original Equipment | 2022-11-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2023-10-17 | PDF 306.8 KB |
| User Manual | Users Manual | 2022-11-15 | PDF 308.9 KB |
| Internal Photos | Internal Photos | 2023-10-17 | PDF 417 KB |
| Internal Photos | Internal Photos | 2022-11-15 | PDF 228.3 KB |
| External Photos | External Photos | 2023-10-17 | PDF 349.9 KB |
| External Photos | External Photos | 2022-11-15 | PDF 270.4 KB |
| Lable | ID Label/Location Info | 2023-10-17 | PDF 171 KB |
| Label Location | ID Label/Location Info | 2022-11-15 | PDF 216 KB |
| Label Sample | ID Label/Location Info | 2022-11-15 | PDF 121.7 KB |
| Setup photos | Test Setup Photos | 2023-10-17 | PDF 578.3 KB |
| Test Setup Photos | Test Setup Photos | 2022-11-15 | PDF 654.1 KB |
| Test report | Test Report | 2023-10-17 | PDF 3.7 MB |
| WellShow 2.4G M4 Type Antenna | Test Report | 2023-05-18 | PDF 218.7 KB |
| Yageo 2.4G Chip Antenna | Test Report | 2023-05-18 | PDF 484.6 KB |
| Cooper Electrical Test Report | Test Report | 2022-11-15 | PDF 3.6 MB |
| Inverted Antenna Simulation | Test Report | 2022-11-15 | PDF 273.2 KB |
| LARNMO5E2400BK Antenna | Test Report | 2022-11-15 | PDF 215.3 KB |
| LairdTRA24003NP Antenna | Test Report | 2022-11-15 | PDF 463.7 KB |
| Wellshow Antenna | Test Report | 2022-11-15 | PDF 218.7 KB |
| Yageo Antenna | Test Report | 2022-11-15 | PDF 484.6 KB |
| Attestation Statements Part 2.911(d)(5)(ii) | Attestation Statements | 2023-10-17 | PDF 227.9 KB |
| POA | Attestation Statements | 2023-10-17 | PDF 246 KB |
| US agent | Attestation Statements | 2023-10-17 | PDF 210.2 KB |
| Attestation pt 2.911(5)(d)(ii) | Attestation Statements | 2023-05-18 | PDF 226 KB |
| Attestation pt 2.911(d)(5)(i) | Attestation Statements | 2023-05-18 | PDF 226.8 KB |
| Attestation pt 2.911(d)(7) | Attestation Statements | 2023-05-18 | PDF 210.2 KB |
| Antenna report | Cover Letter(s) | 2023-10-17 | PDF 598.8 KB |
| Cover letter | Cover Letter(s) | 2023-10-17 | PDF 148 KB |
| PAG | Cover Letter(s) | 2023-10-17 | PDF 108.8 KB |
| POA | Cover Letter(s) | 2023-10-17 | PDF 259 KB |
| C2PC Letter | Cover Letter(s) | 2023-05-18 | PDF 242 KB |
| POA | Cover Letter(s) | 2023-05-18 | PDF 245.4 KB |
| Confidentiality Request | Cover Letter(s) | 2022-11-15 | PDF 85 KB |
| Cover Letter | Cover Letter(s) | 2022-11-15 | PDF 77.3 KB |
| Modular Letter | Cover Letter(s) | 2022-11-15 | PDF 358.5 KB |
| POA Letter | Cover Letter(s) | 2022-11-15 | PDF 63.6 KB |
| RF Exposure Info | RF Exposure Info | 2023-10-17 | PDF 669.4 KB |
| RF Exposure info | RF Exposure Info | 2023-10-17 | PDF 148 KB |
| 25-1A-LATE-001Q SAR App1 Metadata only | RF Exposure Info | 2023-05-18 | PDF 749.1 KB |
| 25-1A-LATE-001Q SAR Appx 1 | RF Exposure Info | 2023-05-18 | PDF 749.1 KB |
| 25-1B-LATE-001Q SAR App2 Metadata only | RF Exposure Info | 2023-05-18 | PDF 942 KB |
| 25-1B-LATE-001Q SAR Appx 2 | RF Exposure Info | 2023-05-18 | PDF 942 KB |
| 25-1C-LATE-001Q SAR 1 | RF Exposure Info | 2023-05-18 | PDF 1.1 MB |
| 25-2A-LATE-002Q SAR Appx1 | RF Exposure Info | 2023-05-18 | PDF 813.7 KB |
| 25-2B-LATE-002Q SAR Appx 2 | RF Exposure Info | 2023-05-18 | PDF 942 KB |
| 25-2C-LATE-002Q SAR 1 | RF Exposure Info | 2023-05-18 | PDF 1.1 MB |
| 25-3A-LATE-003Q SAR Appx 1 | RF Exposure Info | 2023-05-18 | PDF 422.5 KB |
| 25-3B-LATE-003Q SAR 1 | RF Exposure Info | 2023-05-18 | PDF 1.1 MB |
| 25-3B-LATE-003Q SAR Appx 2 | RF Exposure Info | 2023-05-18 | PDF 942 KB |
| 25-4A-LATE-004Q SAR Appx 1 | RF Exposure Info | 2023-05-18 | PDF 491.3 KB |
| 25-4B-LATE-004Q SAR Appx 2 | RF Exposure Info | 2023-05-18 | PDF 942 KB |
| 25-4C-LATE-004Q SAR 1 | RF Exposure Info | 2023-05-18 | PDF 1.1 MB |
| RF Exposure | RF Exposure Info | 2022-11-15 | PDF 700 KB |
| Block Diagram Metadata only | Block Diagram | PDF 152.1 KB | |
| Block Diagram Metadata only | Block Diagram | PDF 126.3 KB | |
| Schematic Diagram Metadata only | Schematics | PDF 441.1 KB | |
| Schematics Metadata only | Schematics | PDF 448.9 KB | |
| Operation Description Metadata only | Operational Description | PDF 139.6 KB | |
| Operational Description Metadata only | Operational Description | PDF 138.2 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 49.4 KB | |
| Part list Metadata only | Parts List/Tune Up Info | PDF 49.3 KB |
Application Information
| Application ID | f/qHZQSR334Sc57xsG0lQA== |
|---|---|
| Final Action Date | 2023-10-17 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0008688764 |
| Model | XPD2400A |
| Frequency Range | 2403.1-2479.8 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 2400MHz Data Tranceiver Module |
| Responsible Party | Patrick Ho, Business Manager, patrickho@eaton.com  , 604-472-4718 |
| Test Firm | Parminder Singh, QAI LABORATORIES LTD., psingh@qai.org  , 604-527-8378 |
| TCB Email | anezam@qai.org |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved solely for integration by Cooper Industries (electrical) into their devices. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi- transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device Class II Permissive Change: Authorizes portable use when integrated into Cooper Industries wireless remote controls, models TD1140, TD2100, TD3100 or TD3200. The highest reported SAR for body and product specific (10g SAR) exposure conditions are 0.17 W/kg and < 0.10 W/kg, respectively Class II Permissive Change: Authorizes to change oscillator. RF output power is listed in test report and cover letter is less than using the original oscillator. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| f/qHZQSR334Sc57xsG0lQA== | 2023-10-17 | Class II permissive change or modification of presently authorized equipment |
| p6OwzZ6Q8Uor36mJh3qADQ== | 2023-05-18 | Class II permissive change or modification of presently authorized equipment |
| 5WgiO0mTYIsBuIVaDJ3HZw== | 2022-11-15 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2403.1-2479.8 MHz | 0.0580000 | 15C |
Grants
TCB Grant - Application p6OwzZ6Q8Uor36mJh3qADQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 05/18/2023 Application Dated: 05/18/2023 |
| COOPER INDUSTRIES (ELECTRICAL) INC |
| #74-1833 Coast Meridian Road |
| Port Coquitlam, BC, V3C 6G5 Canada |
| Attention: Patrick Ho , Business Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IA9XPD2400A |
| Name of Grantee: | COOPER INDUSTRIES (ELECTRICAL) INC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2400MHz Data Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2403.1 - 2479.8 | 0.058 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved solely for integration by Cooper Industries (electrical) into their devices. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Class II Permissive Change: Authorizes portable use when integrated into Cooper Industries wireless remote controls, models TD1140, TD2100, TD3100 or TD3200. The highest reported SAR for body and product specific (10g SAR) exposure conditions are 0.17 W/kg and < 0.10 W/kg, respectively. |
EAS Grant - Application p6OwzZ6Q8Uor36mJh3qADQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
COOPER INDUSTRIES (ELECTRICAL) INC #74-1833 Coast Meridian Road Port Coquitlam, BC, V3C 6G5 Canada |
Date of Grant: 05/18/2023 Application Dated: 05/18/2023 |
| Attention: Patrick Ho , Business Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IA9XPD2400A |
| Name of Grantee: | COOPER INDUSTRIES (ELECTRICAL) INC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2400MHz Data Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2403.1 - 2479.8 | 0.058 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved solely for integration by Cooper Industries (electrical) into their devices. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Class II Permissive Change: Authorizes portable use when integrated into Cooper Industries wireless remote controls, models TD1140, TD2100, TD3100 or TD3200. The highest reported SAR for body and product specific (10g SAR) exposure conditions are 0.17 W/kg and < 0.10 W/kg, respectively. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
QAI LABORATORIES LTD 3980 North Fraser Way Burnaby, BC, V5J5K5 Canada |
Date of Grant: 10/17/2023 Application Dated: 10/16/2023 |
| COOPER INDUSTRIES (ELECTRICAL) INC |
| #74-1833 Coast Meridian Road |
| Port Coquitlam, BC, V3C 6G5 Canada |
| Attention: Patrick Ho , Business Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IA9XPD2400A |
| Name of Grantee: | COOPER INDUSTRIES (ELECTRICAL) INC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2400MHz Data Tranceiver Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2403.1 - 2479.8 | 0.058 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved solely for integration by Cooper Industries (electrical) into their devices. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi- transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device Class II Permissive Change: Authorizes portable use when integrated into Cooper Industries wireless remote controls, models TD1140, TD2100, TD3100 or TD3200. The highest reported SAR for body and product specific (10g SAR) exposure conditions are 0.17 W/kg and < 0.10 W/kg, respectively Class II Permissive Change: Authorizes to change oscillator. RF output power is listed in test report and cover letter is less than using the original oscillator. |
EAS Grant - Application f/qHZQSR334Sc57xsG0lQA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
COOPER INDUSTRIES (ELECTRICAL) INC #74-1833 Coast Meridian Road Port Coquitlam, BC, V3C 6G5 Canada |
Date of Grant: 10/17/2023 Application Dated: 10/16/2023 |
| Attention: Patrick Ho , Business Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IA9XPD2400A |
| Name of Grantee: | COOPER INDUSTRIES (ELECTRICAL) INC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2400MHz Data Tranceiver Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2403.1 - 2479.8 | 0.058 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved solely for integration by Cooper Industries (electrical) into their devices. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi- transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device Class II Permissive Change: Authorizes portable use when integrated into Cooper Industries wireless remote controls, models TD1140, TD2100, TD3100 or TD3200. The highest reported SAR for body and product specific (10g SAR) exposure conditions are 0.17 W/kg and < 0.10 W/kg, respectively Class II Permissive Change: Authorizes to change oscillator. RF output power is listed in test report and cover letter is less than using the original oscillator. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 11/15/2022 Application Dated: 11/15/2022 |
| COOPER INDUSTRIES (ELECTRICAL) INC |
| #74-1833 Coast Meridian Road |
| Port Coquitlam, BC, V3C 6G5 Canada |
| Attention: Patrick Ho , Business Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IA9XPD2400A |
| Name of Grantee: | COOPER INDUSTRIES (ELECTRICAL) INC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2400MHz Data Tranceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2403.1 - 2479.8 | 0.058 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved solely for integration by Cooper Industries (electrical) into their devices. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. |
EAS Grant - Application 5WgiO0mTYIsBuIVaDJ3HZw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
COOPER INDUSTRIES (ELECTRICAL) INC #74-1833 Coast Meridian Road Port Coquitlam, BC, V3C 6G5 Canada |
Date of Grant: 11/15/2022 Application Dated: 11/15/2022 |
| Attention: Patrick Ho , Business Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IA9XPD2400A |
| Name of Grantee: | COOPER INDUSTRIES (ELECTRICAL) INC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2400MHz Data Tranceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2403.1 - 2479.8 | 0.058 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved solely for integration by Cooper Industries (electrical) into their devices. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. |
| Mail To: |