216 XX-216 Walkie Talkies Test Report Kiddesigns Inc

Kiddesigns Inc XX-216 Walkie Talkies

FCC ID Filing: IAJ216
Purchase on Amazon: XX-216 Walkie Talkies

Trouble Viewing? See the or view the HTML Version or PDF in frame
Page 1 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 2 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 3 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 4 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 5 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 6 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 7 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 8 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 9 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 10 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 11 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 12 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 13 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 14 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 15 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 16 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 17 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 18 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 19 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 20 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 21 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 22 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 23 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 24 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Page 25 of 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc

SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
No. 1 Workshop, M-10, Middle section, Science & Technology Park,
Shenzhen, Guangdong, China 518057
Telephone:
Fax:
Email:
+86 (0) 755 2601 2053
+86 (0) 755 2671 0594
ee.shenzhen@sgs.com
Report No.: SZEM171201232201
Page:
1 of 25
TEST REPORT
Application No.:
SZEM1712012322CR(GZEM1712007021CR)
SZEM1712012323CR(GZEM1712007020CR)
Applicant:
Kiddesigns Inc.
Address of Applicant:
1299 Main Street, Rahway, New Jersey07065-0901, United States.
Manufacturer:
Kiddesigns Inc.
Address of Manufacturer:
1299 Main Street, Rahway, New Jersey07065-0901, United States.
Factory:
Derek (Shaoguan) Limited
Address of Factory:
Gaojiling, Taiping Town, Shixing County, Shao Guan City, Guang Dong
Province, China
Equipment Under Test (EUT):
EUT Name:
XX-216 Walkie Talkies
Model No.:
Please refer to section 2♣
♣
Please refer to section 2 of this report which indicates which model was
actually tested and which were electrically identical.
Trade mark:
Please refer to section 2
FCC ID:
IAJ216
IC:
1529B-216
Standard(s) :
47 CFR Part 95, Subpart B
RSS-210 Issue 9
Date of Receipt:
2017-12-08
Date of Test:
2017-12-13 to 2017-12-18
Date of Issue:
2017-12-21
Pass*
Test Result:
* In the configuration tested, the EUT complied with the standards specified above.
Jack Zhang
EMC Laboratory Manager
The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report.
If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system
complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical
Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical
Approvals in writing.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
2 of 25
Revision Record
Version
Chapter
01
Date
2017-12-21
Modifier
Remark
Original
Authorized for issue by:
Edison Li /Project Engineer
Eric Fu /Reviewer
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
3 of 25
Test Summary
Radio Spectrum Technical Requirement
Item
Standard
Method
Requirement
Result
Antenna
Requirement
47 CFR Part 95,
Subpart B
N/A
47 CFR Part 95, Subpart
B 95.587(b)
RSS-210 Issue 9 E.1(b)
Pass
Requirement
Result
Radio Spectrum Matter Part
Item
Standard
Method
Frequency Stability
47 CFR Part 95,
Subpart B
ANSI/TIA-603D:2010
Effective Radiated
Power (ERP)
47 CFR Part 95,
Subpart B
Occupied Bandwidth
47 CFR Part 95,
Subpart B
ANSI/TIA-603D:2010
Modulation
characteristics
47 CFR Part 95,
Subpart B
ANSI/TIA-603D:2010
Radiated Spurious
Emissions
47 CFR Part 95,
Subpart B
ANSI/TIA-603D:2010
47 CFR FCC Part95.565
& FCC Part2.1055;
RSS-210 Issue 9 E.2.6
47 CFR FCC Part95.567
ANSI/TIA-603& FCC Part2.1046;
D:2010
RSS-210 Issue 9 E.2.4
47 CFR FCC Part
95.573 & FCC
Part2.1049;
RSS-210 Issue 9 E.2.3
47 CFR FCC Part
95.575 & FCC
Part2.1047;
RSS-210 Issue 9 E.2.2
47 CFR FCC Part
95.579 & FCC
Part2.1053;
RSS-210 Issue 9 E.2.5
Pass
Pass
Pass
Pass
Pass
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
4 of 25
Remark:
Model No.: AV-216, JW-216, PW-216, ST-216, AM-202, AV-202, CR-202N, DP-202, HY-202, IC-202,
MK-202, ML-202, MM-202, MS-202, PK-202N, PR-202, PW-202N, PW-202CMN, PW-202SEN, SM202, SM-202N, SW-202, SW-202B8, SW-202E7, TR-202N
Only the model AV-216 was tested, since the electrical circuit design, layout, components used,
internal wiring and functions were identical for all the above models, with only difference on model No.,
trade mark, appearance, color.
The details as below:
Model No.:
Trade mark:
AV-216
MARVEL
JW-216
JURASSIC WORLD
PW-216
PAW PATROL
ST-216
DISNEY JUNIOR
AM-202
MARVEL
AV-202
MARVEL
CR-202N
DISNEY
DP-202
DISNEY
HY-202
SANRIO
IC-202
DISNEY
MK-202
DISNEY JUNIOR
ML-202
HASBRO
MM-202
DISNEY JUNIOR
MS-202
UNIVERSAL STUDIO
PK-202N
POKEMAON
PR-202
SABAN’S
PW-202N
PAW PATROL
PW-202CMN
PAW PATROL
PW-202SEN
PAW PATROL
SM-202N
MARVEL
SN-202
MOOSE
SW-202
DISNEY
SW-202B8
DISNEY
SW-202E7
DISNEY
TR-202N
DREAMWORKS
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
5 of 25
Contents
Page
COVER PAGE ..................................................................................................................................... 1
TEST SUMMARY ................................................................................................................................ 3
CONTENTS ......................................................................................................................................... 5
GENERAL INFORMATION .................................................................................................................. 6
4.1
4.2
4.3
4.4
4.5
4.6
4.7
DETAILS OF E.U.T. ......................................................................................................................... 6
DESCRIPTION OF SUPPORT UNITS .................................................................................................... 6
MEASUREMENT UNCERTAINTY ......................................................................................................... 6
TEST LOCATION ............................................................................................................................. 7
TEST FACILITY ............................................................................................................................... 7
DEVIATION FROM STANDARDS.......................................................................................................... 7
ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 7
EQUIPMENT LIST ............................................................................................................................... 8
RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................10
6.1
ANTENNA REQUIREMENT ................................................................................................................10
6.1.1 Test Requirement: ..................................................................................................................10
6.1.2 Conclusion ..............................................................................................................................10
RADIO SPECTRUM MATTER TEST RESULTS ................................................................................11
7.1
FREQUENCY STABILITY ..................................................................................................................11
7.1.1 E.U.T. Operation .....................................................................................................................11
7.1.2 Test Setup Diagram ................................................................................................................11
7.1.3 Measurement Procedure and Data .........................................................................................11
7.2
EFFECTIVE RADIATED POWER (ERP) ..............................................................................................13
7.2.1 E.U.T. Operation .....................................................................................................................13
7.2.2 Test Setup Diagram ................................................................................................................13
7.2.3 Measurement Procedure and Data .........................................................................................14
7.3
OCCUPIED BANDWIDTH ..................................................................................................................15
7.3.1 E.U.T. Operation .....................................................................................................................15
7.3.2 Test Setup Diagram ................................................................................................................15
7.3.3 Measurement Procedure and Data .........................................................................................15
7.4
MODULATION CHARACTERISTICS .....................................................................................................17
7.4.1 E.U.T. Operation .....................................................................................................................17
7.4.2 Test Setup Diagram ................................................................................................................17
7.4.3 Measurement Procedure and Data .........................................................................................17
7.5
RADIATED UNWANTED EMISSIONS ...................................................................................................22
7.5.1 E.U.T. Operation .....................................................................................................................22
7.5.2 Test Setup Diagram ................................................................................................................23
7.5.3 Measurement Procedure and Data .........................................................................................23
EUT CONSTRUCTIONAL DETAILS...................................................................................................25
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
6 of 25
General Information
4.1 Details of E.U.T.
Product Name:
Model No.:
Trade Mark:
Product Description:
Power supply:
Frequency Range:
Modulation Type:
Emission Type:
Antenna Type:
Antenna Gain:
XX-216 Walkie Talkies
AV-216
MARVEL
Family Radio Service(FRS)
DC 6V, “LR44” 1.5V*4
462.5625MHz~462.5625MHz
FM
F3E
Integral
0dBi
4.2 Description of Support Units
The EUT has been tested independent unit.
4.3 Measurement Uncertainty
No.
Item
Radio Frequency
Duty cycle
Occupied Bandwidth
RF conducted power
RF power density
Conducted Spurious emissions
RF Radiated power
Radiated Spurious emission test
10
11
Temperature test
Humidity test
Supply voltages
Measurement Uncertainty
7.25 x 10-8
0.37%
3%
0.75dB
2.84dB
0.75dB
4.5dB (below 1GHz)
4.8dB (above 1GHz)
4.5dB (Below 1GHz)
4.8dB (Above 1GHz)
1°C
3%
1.5%
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
7 of 25
4.4 Test Location
All tests were performed at:
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch
No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China.
518057.
Tel: +86 755 2601 2053
Fax: +86 755 2671 0594
No tests were sub-contracted.
4.5 Test Facility
The test facility is recognized, certified, or accredited by the following organizations:
• CNAS (No. CNAS L2929)
CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC
Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration
Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration
Laboratories) for the competence in the field of testing.
• A2LA (Certificate No. 3816.01)
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the
American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01.
• VCCI
The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz,
Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port
Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have
been registered in accordance with the Regulations for Voluntary Control Measures with Registration
No.: G-20026, R-14188, C-12383 and T-11153 respectively.
• FCC –Designation Number: CN1178
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized
as an accredited testing laboratory.
Designation Number: CN1178. Test Firm Registration Number: 406779.
• Industry Canada (IC)
Two 3m Semi-anechoic chambers and the 10m Semi-anechoic chamber of SGS-CSTC Standards
Technical Services Co., Ltd. Shenzhen Branch EMC Lab have been registered by Certification and
Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620C-1,
4620C-2, 4620C-3.
4.6 Deviation from Standards
None
4.7 Abnormalities from Standard Conditions
None
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
8 of 25
Equipment List
RF Conducted Test
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
DC Power Supply
Spectrum Analyzer
ZhaoXin
Rohde & Schwarz
RXN-305D
FSP
SEM011-02
SEM004-06
2017-09-27
2017-09-27
2018-09-26
2018-09-26
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Coaxial Cable
N/A
SEM031-02
2017-07-13
2018-07-12
WA41
SEM021-09
N/A
N/A
Signal Generator
Power Meter
SGS
Weinschel
Associates
KEYSIGHT
Rohde & Schwarz
N5173B
NRVS
SEM006-05
SEM014-02
2017-09-27
2017-09-27
2018-09-26
2018-09-26
Audio Analyzer
Rohde & Schwarz
UPL
SEM0093
2017-09-27
2018-09-26
Attenuator
Radiated Spurious Emissions
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
3m Semi-Anechoic
Chamber
AUDIX
N/A
SEM001-02
2017-05-02
2020-05-01
Measurement Software
AUDIX
e3 V8.2014-627
N/A
N/A
N/A
Coaxial Cable
Spectrum Analyzer
SGS
Rohde & Schwarz
N/A
FSU43
SEM026-01
SEM004-08
2017-07-13
2017-04-14
2018-07-12
2018-04-13
BiConiLog Antenna
(26-3000MHz)
ETS-Lindgren
3142C
SEM003-01
2017-06-27
2020-06-26
Rohde & Schwarz
HF907
SEM003-07
2015-06-14
2018-06-13
Schwarzbeck
BBHA 9170
SEM003-15
2017-10-17
2020-10-16
HP
8447D
SEM005-02
2017-09-27
2018-09-26
Horn Antenna
(1-18GHz)
Horn Antenna
(15GHz-40GHz)
Pre-amplifier
(0.1-1300MHz)
Low Noise Amplifier
(100MHz-18GHz)
Pre-amplifier(18-26GHz)
Black Diamond
Series
BDLNA-0118352810
SEM005-05
2017-09-27
2018-09-27
Rohde & Schwarz
CH14-H052
SEM005-17
2017-12-04
2018-12-03
Pre-amplifier
(26GHz-40GHz)
Compliance
Directions Systems
Inc.
PAP-2640-50
SEM005-08
2017-04-14
2018-04-13
DC Power Supply
Active Loop Antenna
Zhao Xin
ETS-Lindgren
RXN-305D
6502
SEM011-02
SEM003-08
2017-09-27
2017-08-22
2018-09-26
2020-08-21
Band filter
N/A
N/A
SEM023-01
N/A
N/A
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
9 of 25
RE in Chamber
Test Equipment
Manufacturer
3m Semi-Anechoic
ETS-LINDGREN
Chamber
MXE EMI Receiver
Agilent Technologies
(20Hz-8.4GHz)
BiConiLog Antenna
ETS-LINDGREN
(26-3000MHz)
Trilog-Broadband
Schwarzbeck
Antenna(30M-1GHz)
Pre-amplifier
Agilent Technologies
(0.1-1300MHz)
Measurement
AUDIX
Software
Coaxial Cable
SGS
Cal. Date
Cal. Due date
(yyyy-mm-dd) (yyyy-mm-dd)
Model No.
Inventory No.
N/A
SEM001-01
2017-08-05
2020-08-04
N9038A
SEM004-05
2017-09-27
2018-09-26
3142C
SEM003-01
2017-06-27
2020-06-26
VULB9168
SEM003-18
2016-06-29
2019-06-28
8447D
SEM005-01
2017-04-14
2018-04-13
N/A
N/A
SEM025-01
2017-07-13
2018-07-12
Model No
Inventory No
Cal Date
Cal Due Date
ZJ1-2B
SEM002-03
2017-09-29
2018-09-28
ZJ1-2B
SEM002-04
2017-09-29
2018-09-28
e3 V8.2014-6-27
N/A
N/A
General used equipment
Equipment
Humidity/ Temperature
Indicator
Humidity/ Temperature
Indicator
Manufacturer
Shanghai
Meteorological
Industry Factory
Shanghai
Meteorological
Industry Factory
Humidity/ Temperature
Indicator
Mingle
N/A
SEM002-08
2017-09-29
2018-09-28
Barometer
Changchun
Meteorological
Industry Factory
DYM3
SEM002-01
2017-04-18
2018-04-17
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
10 of 25
Radio Spectrum Technical Requirement
6.1 Antenna Requirement
6.1.1
Test Requirement:
47 CFR Part 95, Subpart B 95.587(b) & RSS-210 Issue 9 E.1(b)
6.1.2
Conclusion
95.587(b) Requirement:
The antenna of each FRS transmitter type must meet the following requirements.
(1) The antenna must be a non-removable integral part of the FRS transmitter type.
(2) The gain of the antenna must not exceed that of a half-wave dipole antenna.
(3) The antenna must be designed such that the electric field of the emitted waves is vertically
polarized when the unit is operated in the normal orientation.
RSS-210 Issue 9 E.1(b) Requirement:
(b) The antenna of FRS devices must be an integral part of the unit.
EUT Antenna:
The antenna is integrated on the main PCB and no consideration of replacement. The antenna gain is
0dBi (as compared to a half-wave dipole) and with vertically polarized.
Antenna location: Refer to Appendix(Internal photos)
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
11 of 25
Radio Spectrum Matter Test Results
7.1 Frequency Stability
Test Requirement
Test Method:
Limit:
47 CFR FCC Part 95.565 & FCC Part 2.1055;
RSS-210 Issue 9 E.2.6
ANSI/TIA-603-D:2010
For FCC Part 95.565:
Each FRS transmitter type must be designed such that the carrier
frequencies remain within ±2.5 parts-per-million of the channel center
frequencies
specified in §95.563 during normal operating conditions.
For RSS-210 Issue 9:
The carrier frequency stability shall be better than ±5 ppm.
7.1.1
E.U.T. Operation
Operating Environment:
Temperature:
24.8 °C
Atmospheric Pressure: 1020
Humidity: 49.2 % RH
Test mode:
a: Tx mode, Keep the EUT in transmitting mode.
7.1.2 Test Setup Diagram
7.1.3
mbar
Measurement Procedure and Data
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
12 of 25
Assigned Frequency:462.5625MHz
Temperature
Voltage(V)
6.9
5.1
Measured
Frequency(MHz)
Frequency
Deviation(ppm)
-0.4
0.2
-1.1
-0.9
-0.9
-1.1
-0.6
-0.4
50
462.5623
462.5626
462.5620
462.5621
462.5621
462.5620
462.5622
462.5623
462.5624
25
25
462.5625
462.5625
(℃)
-30
-20
-10
10
20
30
40
FCC Limit
(ppm)
IC Limit
(ppm)
Result
±2.5
±5
Pass
-0.2
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
13 of 25
7.2 Effective Radiated Power (ERP)
Test Requirement
Test Method:
Measurement Distance:
47 CFR FCC Part95.567 & FCC Part2.1046;
RSS-210 Issue 9 E.2.4
ANSI/TIA-603-D:2010
3m
Test instrumentation resolution bandwidth 100 kHz (30 MHz - 1000 MHz)
Limit:
For FCC Part 95.567:
Each FRS transmitter type must be designed such that the effective
radiated power (ERP) on channels 8 through 14 does not exceed 0.5 Watts
and the ERP on channels 1 through 7 and 15 through 22 does not exceed
2.0 Watts.
For RSS-210 E.2.4:
The maximum permissible transmitted ERP of the equipment under any
operating conditions shall not exceed 0.5 W.
7.2.1
E.U.T. Operation
Operating Environment:
Temperature:
24.8 °C
Atmospheric Pressure: 1020
Humidity: 49.3 % RH
Test mode:
a: Tx mode, Keep the EUT in transmitting mode.
7.2.2 Test Setup Diagram
mbar
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
14 of 25
7.2.3
Measurement Procedure and Data
The technique used to find the output power of the transmitter was the antenna substitution method.
The following test procedure was followed:
1). The EUT was powered ON and placed on a 0.8m high table in the chamber. The antenna of the
transmitter was extended to its maximum length.
2). The disturbance of the transmitter was maximized on the test receiver display by lowering 1m the
receive antenna and by rotating through 360° the turntable. After the fundamental emission was
maximized, a field strength measurement was made.
3). Steps 1) and 2) were performed with the EUT and the receive antenna in both vertical and horizontal
polarization.
4). The transmitter was then removed and replaced with another antenna. The center of the antenna was
approximately at the same location as the center of the transmitter.
5). A signal at the disturbance was fed to the substitution antenna by means of a non-radiating cable. With
both the substitution and the receive antennas horizontally polarized, the receive antenna was raised
and lowered to obtain a maximum reading at the test receiver. The level of the signal generator was
adjusted until the measured field strength level in step 2) is obtained for this set of conditions.
6). The output power into the substitution antenna was then measured.
7). Steps 5) and 6) were repeated with both antennas polarized.
8). Calculate power in dBm by the following formula:
ERP (dBm) = Pg(dBm) – cable loss (dB) + antenna gain (dBd)
Where:
Pg is the generator output power into the substitution antenna.
Test result:
Effective Radiated Power of Transmitter (ERP)
Freq.
(MHz)
Meas.
Level
(dBm)
SGP
(dBm)
Substitutio
Gain(dBd)
Cable
Loss
(dB)
Substitution
Level(ERP)
/ dBm
Substitution
Level(ERP)
/W
FCC
Limit
(W)
IC
Limit
(W)
Result
462.5625
6.3
11.68
-4.9
0.6
6.18
0.0041
2.0
0.5
Pass
Note:
a: For getting the ERP (Efficient Radiated Power) in substitution method, the following formula should be
taken to calculate it:
ERP [dBm] = SGP [dBm] – Cable Loss [dB] + Gain [dBd]
b: SGP=Signal Generator Level
c: RBW > emission bandwidth, VBW > 3 x RBW, Detector: RMS
d: Per FCC part95.563 & RSS-210 E.2.1 FRS channel 1 is 462.5625MHz.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
15 of 25
7.3 Occupied Bandwidth
Test Requirement
Test Method:
Limit:
7.3.1
47 CFR FCC Part 95.573 & FCC Part2.1049;
RSS-210 Issue 9 E.2.3
ANSI/TIA-603-D:2010
For FCC Part 95.567:
Each FRS transmitter type must be designed such that the occupied
bandwidth does not exceed 12.5 kHz.
For RSS-210 E.2.3:
The authorized bandwidth for an FRS unit is 12.5 kHz.
E.U.T. Operation
Operating Environment:
Temperature:
24.8 °C
Atmospheric Pressure: 1020
Humidity: 49.2 % RH
Test mode:
a: Tx mode, Keep the EUT in transmitting mode.
7.3.2
Test Setup Diagram
7.3.3
Measurement Procedure and Data
mbar
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
16 of 25
Test result:
The occupied Bandwidth is measured to be 4.26 KHz for FRS.
* RBW 300 Hz
* VBW 1 kHz
Ref
0 dBm
* Att
10 dB
SWT 225 ms
-10
1 PK
VIEW
-20
T1
T2
Marker 1 [T1 ]
-8.88 dBm
462.561826923 MHz
OBW 4.262820513
Temp 1 [T1 OBW]
-25.60
462.559679487
Temp 2 [T1 OBW]
-25.95
462.563942308
kHz
dBm
MHz
dBm
MHz
-30
-40
-50
3DB
-60
-70
-80
-90
-100
Center
462.5625 MHz
2 kHz/
* RBW 300 Hz
* VBW 1 kHz
Ref
0 dBm
* Att
10 dB
SWT 1.8 s
Span
20 kHz
Marker 1 [T1 ]
-10.74 dBm
462.561217949 MHz
-10
1 PK
VIEW
-20
2 PK
VIEW
-30
-40
-50
95
3DB
-60
-70
-80
-90
-100
Center
462.5625 MHz
16 kHz/
Span
160 kHz
Channel 1 462.5625MHz FRS
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
17 of 25
7.4 Modulation characteristics
Test Requirement
Test Method:
Limit:
47 CFR FCC Part 95.575 & FCC Part2.1047;
RSS-210 Issue 9 E.2.2
ANSI/TIA-603-D:2010
For FCC Part 95.575:
Each FRS transmitter type must be designed such that the peak frequency
deviation does not exceed 2.5 kHz, and the highest audio frequency
contributing substantially to modulation must not exceed 3.125 kHz.
For RSS-210 E.2.3:
The peak frequency deviation shall not exceed ±2.5 kHz. The limiter shall be
followed by a low-pass filter to remove unwanted harmonic emissions.
7.4.1
E.U.T. Operation
Operating Environment:
Atmospheric Pressure: 1020
Temperature:
24.8 °C
Humidity: 49.2 % RH
Test mode:
a: Tx mode, Keep the EUT in transmitting mode.
7.4.2 Test Setup Diagram
7.4.3
mbar
Measurement Procedure and Data
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
18 of 25
Test result:
a. Frequency deviation:
Modulation
Input(dB)
-20
-15
-10
-5
10
15
20
Peak Frequency
Deviation(KHz)
at 300Hz
0.47
0.56
0.73
0.81
1.02
0.92
1.41
1.37
1.50
Channel 1: 462.5625MHz FRS
Peak Frequency Peak Frequency
Deviation(KHz)
Deviation(KHz)
at 1000Hz
at 2500Hz
0.52
0.43
0.67
0.52
0.79
0.58
0.78
0.49
0.85
0.61
1.27
0.53
1.32
0.45
1.15
0.42
1.38
0.46
Peak Frequency
Deviation(KHz)
at 3000Hz
0.39
0.44
0.48
0.41
0.46
0.51
0.49
0.53
0.42
Limit
(KHz)
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
2.50
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
19 of 25
b. Audio Frequency Response
Channel 1 for FRS
Limit
Modulation
Frequency(Hz)
Peak Modulation
Deviation(KHz)
(KHz)
100
200
300
400
500
600
700
800
900
1000
1250
1500
1750
2000
2250
2500
2750
3000
3125
3250
3500
4000
5000
0.48
0.85
0.93
1.25
1.26
1.38
1.39
1.45
1.48
1.34
1.49
1.52
1.32
1.37
1.29
1.44
1.29
1.19
0.97
0.78
0.39
0.45
0.51
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
3.125
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
20 of 25
c. Audio Low Pass Filter Frequency Response
Channel 1 for FRS
Frequency(KHz)
Response (dB)
10
20
30
40
50
60
70
80
90
100
0.00
0.00
-5.22
-10.89
-15.82
-19.67
-24.32
-28.65
-31.33
-33.97
-55.11
-55.11
-55.11
-55.11
-55.11
-55.11
-55.11
-55.11
-55.11
Limit (KHz)
0.00
0.00
0.00
-8.52
-13.64
-18.75
-22.16
-25.57
-28.98
-32.29
-49.43
-50.00
-50.00
-50.00
-50.00
-50.00
-50.00
-50.00
-50.00
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
21 of 25
d. Modulation Limiting
Channel 1 for FRS
Instantaneous
Audio
Frequency(Hz)
300
400
500
600
700
800
900
1000
1200
1400
1600
1800
2000
2200
2200
2300
2400
2500
2600
2700
2800
2900
3000
Deviation
Deviation
Steady-state
Deviation
Deviation
Limit
(KHz)
(+20dB)
(-20dB)
(+20dB)
(-20dB)
(KHz)
(KHz)
(KHz)
(KHz)
0.772
0.848
0.797
0.789
1.022
1.049
1.171
1.284
1.327
1.553
1.767
2.314
2.303
1.995
1.896
1.779
1.735
1.877
1.915
1.922
1.558
1.407
1.377
0.129
0.155
0.161
0.176
0.193
0.176
0.147
0.155
0.211
0.269
0.303
0.279
0.335
0.397
0.411
0.453
0.397
0.388
0.354
0.315
0.268
0.214
0.188
0.744
0.817
0.754
0.767
1.053
1.011
1.146
1.244
1.362
1.579
1.735
2.343
2.314
1.976
1.855
1.737
1.766
1.823
1.947
1.963
1.571
1.466
1.336
0.133
0.146
0.147
0.199
0.225
0.234
0.273
0.188
0.244
0.301
0.300
0.246
0.311
0.343
0.356
0.411
0.364
0.325
0.303
0.279
0.243
0.200
0.141
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
22 of 25
7.5 Radiated Unwanted Emissions
Test Requirement
47 CFR FCC Part 95.579 & FCC Part2.1053;
RSS-210 Issue 9 E.2.5
Test Method:
ANSI/TIA-603-D:2010
Measurement Distance: 3m
Resolution bandwidth =10 kHz for spurious emissions below 1 GHz, and 1
MHz for spurious emissions above 1GHz.
Video Bandwidth = 300 kHz for spurious emissions below 1 GHz, and 3 MHz
for spurious emissions above 1 GHz.
Limit:
For FCC Part 95.579 & RSS-210 E.2.5:
Each FRS transmitter type must be designed to satisfy the applicable
unwanted emissions limits in this paragraph.
(a) Attenuation requirements. The power of unwanted emissions must be
attenuated below the carrier power output in Watts (P) by at least:
(1) 25 dB (decibels) in the frequency band 6.25 kHz to 12.5 kHz removed
from the channel center frequency.
(2) 35 dB in the frequency band 12.5 kHz to 31.25 kHz removed from the
channel center frequency.
(3) 43 + 10 log (P) dB in any frequency band removed from the channel
center frequency by more than 31.25 kHz.
(b) Measurement bandwidths. The power of unwanted emissions in the
frequency bands specified in paragraphs (a)(1) and (2) of this section is
measured with a reference bandwidth of 300 Hz. The power of unwanted
emissions in the frequency range specified in paragraph (a)(3) is measured
with a reference bandwidth of at least 30 kHz.
(c) Measurement conditions. The requirements in this section apply to each
FRS transmitter type both with and without the connection of permitted
attachments, such as an external speaker, microphone and/or power cord.
7.5.1
E.U.T. Operation
Operating Environment:
Temperature:
23.1 °C
Atmospheric Pressure: 1020
Humidity: 48 % RH
Test mode:
a: Tx mode, Keep the EUT in transmitting mode.
mbar
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
23 of 25
7.5.2
Test Setup Diagram
7.5.3
Measurement Procedure and Data
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
24 of 25
Test Result:
Frequency
Polarity
Emission Level
Limit
Margin
MHz
H/V
dBm
dBm
dBm
925.125
-18.28
-13.00
-5.28
1387.688
-30.20
-13.00
-17.2
1850.250
-35.21
-13.00
-22.21
2312.813
-39.71
-13.00
-26.71
2775.375
-36.68
-13.00
-23.68
925.125
-22.11
-13.00
-9.11
1387.688
-40.88
-13.00
-27.88
1850.250
-37.06
-13.00
-24.06
2312.813
-39.17
-13.00
-26.17
2775.375
-38.24
-13.00
-25.24
Note: Margin = Emission level – Limit.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM171201232201
Page:
25 of 25
EUT Constructional Details
Refer to EUT external and internal photos.
- End of the Report -
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
Download: 216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Mirror Download [FCC.gov]216 XX-216 Walkie Talkies Test Report  Kiddesigns Inc
Document ID3747673
Application IDnyhoVWvohE0zOT4ixK9NNA==
Document Descriptiontest report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize66.28kB (828481 bits)
Date Submitted2018-02-09 00:00:00
Date Available2018-02-09 00:00:00
Creation Date2018-02-08 13:57:04
Producing SoftwareGPL Ghostscript 8.64
Document Lastmod2018-02-08 05:57:06
Document Titletest report
Document CreatorPScript5.dll Version 5.2.2
Document Author: yuxiu_yang

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Page Count                      : 25
Create Date                     : 2018:02:08 13:57:04+08:00
Title                           : Microsoft Word - SZEM171201232201-Part 95   RPT.doc
Producer                        : GPL Ghostscript 8.64
Author                          : yuxiu_yang
Creator                         : PScript5.dll Version 5.2.2
Modify Date                     : 2018:02:08 05:57:06Z
EXIF Metadata provided by EXIF.tools

Facebook Twitter Google+ RSS © FCCID.io 2018