| Class II Permissive Change
Power output is conducted. This device is authorized to operate with the specific handset described in this filing. SAR compliance for body-worn accessory operation is based on a separation distance of 2.5 cm between the unit and the body of the user. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory, product specific (wireless router), product specific (lapdock) and simultaneous transmission use conditions are 0.26 W/kg, 0.18 W/kg, 0.31 W/kg, TCB Grant - Application PcoidUPz3GIKqoYxFMxpDw==
| TCB |
GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
PCTEST Engineering Laboratory, Inc.
6660-B Dobbin Road
Columbia, MD 21045
|
Date of Grant: 09/09/2011
Application Dated: 09/02/2011
|
| Motorola Mobility LLC |
| Motorola Mobility LLC |
| 222 W. Merchandise Mart Plaza |
Chicago, IL 60654
|
| |
| Attention: Craig Gatto , Director of Product Safety and Compliance |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
IHDP56MD3 |
|
|
| Name of Grantee: |
Motorola Mobility LLC |
|
|
| Equipment Class: |
Part 15 Spread Spectrum Transmitter |
| Notes: |
Portable Cellular/ PCS CDMA Transceiver with WLAN and Bluetooth |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| CC |
15C |
2402.0
-
2480.0
|
0.017
|
|
|
| Output power is conducted. This device is approved for use in the handset described in the filing. |
| CC: |
This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application PcoidUPz3GIKqoYxFMxpDw==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
Motorola Mobility LLC
Motorola Mobility LLC
222 W. Merchandise Mart Plaza
Chicago, IL 60654
United States
|
|
Date of Grant: 09/09/2011
Application Dated: 09/02/2011
|
| |
| Attention: Craig Gatto , Director of Product Safety and Compliance |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
IHDP56MD3 |
|
|
| Name of Grantee: |
Motorola Mobility LLC |
|
|
| Equipment Class: |
Part 15 Spread Spectrum Transmitter |
| Notes: |
Portable Cellular/ PCS CDMA Transceiver with WLAN and Bluetooth |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| CC |
15C |
2402.0
-
2480.0
|
0.017
|
|
|
| Output power is conducted. This device is approved for use in the handset described in the filing. |
| CC: |
This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
|
|
|
|
|
TCB Grant - Application mXhEcgy9gf/0Ff/LPQ//oA==
| TCB |
GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
PCTEST Engineering Laboratory, Inc.
6660-B Dobbin Road
Columbia, MD 21045
|
Date of Grant: 09/09/2011
Application Dated: 09/02/2011
|
| Motorola Mobility LLC |
| Motorola Mobility LLC |
| 222 W. Merchandise Mart Plaza |
Chicago, IL 60654
|
| |
| Attention: Craig Gatto , Director of Product Safety and Compliance |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
IHDP56MD3 |
|
|
| Name of Grantee: |
Motorola Mobility LLC |
|
|
| Equipment Class: |
PCS Licensed Transmitter held to ear |
| Notes: |
Portable Cellular/ PCS CDMA Transceiver with WLAN and Bluetooth |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| HC |
22H |
824.7
-
848.31
|
0.208
|
2.5
PM
|
1M27F9W
|
| HC |
24E |
1851.25
-
1908.75
|
1.127
|
2.5
PM
|
1M28F9W
|
| Power output listed is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn accessory operation is based on a separation distance of 2.5 cm between the unit and the body of the user. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.99 W/kg, 0.70 W/kg, 0.89 W/kg, and 1.25 W/kg, respectively.
This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.
HAC Rating: M4T4 - 2007 |
| HC: |
This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
EAS Grant - Application mXhEcgy9gf/0Ff/LPQ//oA==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
Motorola Mobility LLC
Motorola Mobility LLC
222 W. Merchandise Mart Plaza
Chicago, IL 60654
United States
|
|
Date of Grant: 09/09/2011
Application Dated: 09/02/2011
|
| |
| Attention: Craig Gatto , Director of Product Safety and Compliance |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
IHDP56MD3 |
|
|
| Name of Grantee: |
Motorola Mobility LLC |
|
|
| Equipment Class: |
PCS Licensed Transmitter held to ear |
| Notes: |
Portable Cellular/ PCS CDMA Transceiver with WLAN and Bluetooth |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| HC |
22H |
824.7
-
848.31
|
0.208
|
2.5
PM
|
1M27F9W
|
| HC |
24E |
1851.25
-
1908.75
|
1.127
|
2.5
PM
|
1M28F9W
|
| Power output listed is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn accessory operation is based on a separation distance of 2.5 cm between the unit and the body of the user. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.99 W/kg, 0.70 W/kg, 0.89 W/kg, and 1.25 W/kg, respectively.
This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.
HAC Rating: M4T4 - 2007 |
| HC: |
This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
| Mail To: |
|
|
|
|
|
TCB Grant - Application mrmdnbkzBL6eggHP4VrUmw==
| TCB |
GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
PCTEST Engineering Laboratory, Inc.
6660-B Dobbin Road
Columbia, MD 21045
|
Date of Grant: 09/09/2011
Application Dated: 09/02/2011
|
| Motorola Mobility LLC |
| Motorola Mobility LLC |
| 222 W. Merchandise Mart Plaza |
Chicago, IL 60654
|
| |
| Attention: Craig Gatto , Director of Product Safety and Compliance |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
IHDP56MD3 |
|
|
| Name of Grantee: |
Motorola Mobility LLC |
|
|
| Equipment Class: |
Part 15 Class B Computing Device Peripheral |
| Notes: |
Portable Cellular/ PCS CDMA Transceiver with WLAN and Bluetooth |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| 16 CC |
15B |
-
|
|
|
|
| 16: |
If the subject device requires shielded interface cables to ensure compliance, the user's manual must advise the user of this requirement. |
| CC: |
This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application mrmdnbkzBL6eggHP4VrUmw==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
Motorola Mobility LLC
Motorola Mobility LLC
222 W. Merchandise Mart Plaza
Chicago, IL 60654
United States
|
|
Date of Grant: 09/09/2011
Application Dated: 09/02/2011
|
| |
| Attention: Craig Gatto , Director of Product Safety and Compliance |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
IHDP56MD3 |
|
|
| Name of Grantee: |
Motorola Mobility LLC |
|
|
| Equipment Class: |
Part 15 Class B Computing Device Peripheral |
| Notes: |
Portable Cellular/ PCS CDMA Transceiver with WLAN and Bluetooth |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| 16 CC |
15B |
-
|
|
|
|
| 16: |
If the subject device requires shielded interface cables to ensure compliance, the user's manual must advise the user of this requirement. |
| CC: |
This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
|
|
|
|
|
TCB Grant - Application joMl07ze06jUpJonTtW6oA==
| TCB |
GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
PCTEST Engineering Laboratory, Inc.
6660-B Dobbin Road
Columbia, MD 21045
|
Date of Grant: 11/10/2011
Application Dated: 11/10/2011
|
| Motorola Mobility LLC |
| Motorola Mobility LLC |
| 222 W. Merchandise Mart Plaza |
Chicago, IL 60654
|
| |
| Attention: Craig Gatto , Director of Product Safety and Compliance |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
IHDP56MD3 |
|
|
| Name of Grantee: |
Motorola Mobility LLC |
|
|
| Equipment Class: |
PCS Licensed Transmitter held to ear |
| Notes: |
Portable Cellular/ PCS CDMA Transceiver with WLAN and Bluetooth |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| HC |
22H |
824.7
-
848.31
|
0.208
|
2.5
PM
|
1M27F9W
|
| HC |
24E |
1851.25
-
1908.75
|
1.127
|
2.5
PM
|
1M28F9W
|
| Class II Permissive Change
Power output listed is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn accessory operation is based on a separation distance of 2.5 cm between the unit and the body of the user. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory, product specific (wireless router), product specific (lapdock) and simultaneous transmission use conditions are 0.99 W/kg, 0.70 W/kg, 0.89 W/kg, 0.75 W/kg and 1.25 W/kg, respectively.
HAC Rating: M4T4 - 2007
This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. |
| HC: |
This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
EAS Grant - Application joMl07ze06jUpJonTtW6oA==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
Motorola Mobility LLC
Motorola Mobility LLC
222 W. Merchandise Mart Plaza
Chicago, IL 60654
United States
|
|
Date of Grant: 11/10/2011
Application Dated: 11/10/2011
|
| |
| Attention: Craig Gatto , Director of Product Safety and Compliance |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
IHDP56MD3 |
|
|
| Name of Grantee: |
Motorola Mobility LLC |
|
|
| Equipment Class: |
PCS Licensed Transmitter held to ear |
| Notes: |
Portable Cellular/ PCS CDMA Transceiver with WLAN and Bluetooth |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| HC |
22H |
824.7
-
848.31
|
0.208
|
2.5
PM
|
1M27F9W
|
| HC |
24E |
1851.25
-
1908.75
|
1.127
|
2.5
PM
|
1M28F9W
|
| Class II Permissive Change
Power output listed is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn accessory operation is based on a separation distance of 2.5 cm between the unit and the body of the user. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory, product specific (wireless router), product specific (lapdock) and simultaneous transmission use conditions are 0.99 W/kg, 0.70 W/kg, 0.89 W/kg, 0.75 W/kg and 1.25 W/kg, respectively.
HAC Rating: M4T4 - 2007
This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. |
| HC: |
This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
| Mail To: |
|
|
|
|
|
TCB Grant - Application FhSGpHv2pcUNgrD8+0IAXw==
| TCB |
GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
PCTEST Engineering Laboratory, Inc.
6660-B Dobbin Road
Columbia, MD 21045
|
Date of Grant: 09/09/2011
Application Dated: 09/02/2011
|
| Motorola Mobility LLC |
| Motorola Mobility LLC |
| 222 W. Merchandise Mart Plaza |
Chicago, IL 60654
|
| |
| Attention: Craig Gatto , Director of Product Safety and Compliance |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
IHDP56MD3 |
|
|
| Name of Grantee: |
Motorola Mobility LLC |
|
|
| Equipment Class: |
Digital Transmission System |
| Notes: |
Portable Cellular/ PCS CDMA Transceiver with WLAN and Bluetooth |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| CC HX |
15C |
2412.0
-
2462.0
|
0.025
|
|
|
| Power output is conducted. This device is authorized to operate with the specific handset described in this filing. SAR compliance for body-worn accessory operation is based on a separation distance of 2.5 cm between the unit and the body of the user. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.26 W/kg, 0.18 W/kg, 0.31 W/kg, and 1.25 W/kg, respectively. |
| CC: |
This device is certified pursuant to two different Part 15 rules sections. |
| HX: |
This mode of operation has the means to permit held to the ear telephone calls but has not been tested for hearing aid compatibility. The device supports other modes which have been found to be compliant with the HAC rules. |
EAS Grant - Application FhSGpHv2pcUNgrD8+0IAXw==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
Motorola Mobility LLC
Motorola Mobility LLC
222 W. Merchandise Mart Plaza
Chicago, IL 60654
United States
|
|
Date of Grant: 09/09/2011
Application Dated: 09/02/2011
|
| |
| Attention: Craig Gatto , Director of Product Safety and Compliance |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
IHDP56MD3 |
|
|
| Name of Grantee: |
Motorola Mobility LLC |
|
|
| Equipment Class: |
Digital Transmission System |
| Notes: |
Portable Cellular/ PCS CDMA Transceiver with WLAN and Bluetooth |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| CC HX |
15C |
2412.0
-
2462.0
|
0.025
|
|
|
| Power output is conducted. This device is authorized to operate with the specific handset described in this filing. SAR compliance for body-worn accessory operation is based on a separation distance of 2.5 cm between the unit and the body of the user. End-users must be informed of the body-worn accessory operating requirements for satisfying RF exposure compliance. Belt clips or holsters not listed in this filing may not contain metallic components. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions are 0.26 W/kg, 0.18 W/kg, 0.31 W/kg, and 1.25 W/kg, respectively. |
| CC: |
This device is certified pursuant to two different Part 15 rules sections. |
| HX: |
This mode of operation has the means to permit held to the ear telephone calls but has not been tested for hearing aid compatibility. The device supports other modes which have been found to be compliant with the HAC rules. |
|