FCC ID IHDT56AT8

Output Power is EIRP. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 5.0 mm, as described in this filing. End-users must be informed of the body- worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission and product specific (10g SAR) exposure conditions are 0.91 W/kg, 1.30 W/kg, 1.30 W/kg, 1.57 W/kg and 2.93 W/kg, respectively. This device supports LTE of 5, 10, 15 and 20 MHz bandwidth modes for TDD LTE Band and 48. This device also supports LTE uplink carrier aggregations as described in this filing. This device also supports Frequency Range 1 5G NR modes of 10, 20, 30 and 40MHz bandwidth modes for TDD Band n48. Frequency Range 1 uplink carrier aggregations are supported by this device, as described in this filing. HAC-2019, under the waiver DA 23-914. The lowest conversational gain is 18.0 dB with a hearing aid and 22.3 dB without a hearing aid.

Output Power is EIRP. Device operates with specific antennas in MIMO configurations as described in this filing. RF exposure compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 5.0 mm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. This device supports 20, 40, 80 and 160 MHz modes. Device 6 GHz operation is intended for indoor use only. HAC-2019, under the waiver DA 23-914. The lowest conversational gain is 18.0 dB with a hearing aid and 22.3 dB without a hearing aid.

Output Power listed is the maximum conducted output power. SAR compliance for body- worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 5.0 mm, as described in this filing. End-users must be informed of the body- worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router) and simultaneous transmission exposure conditions are 0.41 W/kg, 0.39 W/kg, 0.26 W/kg, 1.59 W/kg, respectively.

Output Power is EIRP and ERP for above and below 1 GHz, respectively, except for Part 90 LTE Band 26 and 5G n26 emissions, which are conducted. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 5.0 mm, as described in this filing. End-users must be informed of the body- worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission and product specific (10g SAR) exposure conditions are 0.90 W/kg, 1.30 W/kg, 1.30 W/kg, 1.57 W/kg and 3.28 W/kg, respectively. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4, 25 and 66; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 7 and 71; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14, 17 and 30; LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth modes for FDD LTE Band 26; and LTE of 5, 10, 15 and 20 MHz bandwidth modes for TDD LTE Bands 38, 41 and 42. This device also supports LTE uplink carrier aggregations as described in this filing. This device also supports Frequency Range 1 5G NR modes of 5, 10, 15 and 20MHz bandwidth modes for FDD Bands n2, n5, n26 and n71; 5, 10, 15, 20, 25, 30, 40 and 50MHz bandwidth modes for FDD Band n7; 5, 10 and 15MHz bandwidth modes for FDD Bands n12 and n70; 5 and 10MHz bandwidth modes for FDD Bands n14 and n30; 5, 10, 15, 20, 25, 30, 35 and 40MHz bandwidth modes for FDD Bands n25 and n66; 10, 15, 20, 30 and 40MHz bandwidth modes for TDD Band n38; 10, 15, 20, 30, 40, 50, 60, 70, 80, 90 and 100 MHz bandwidth modes for TDD Band n41; and 10, 15, 20, 25, 30, 40, 50, 60, 70, 80, 90 and 100 MHz bandwidth modes for TDD Bands n77 and n78. Frequency Range 1 5G NR ENDC modes and uplink carrier aggregations are supported by this device, as described in this filing. HAC-2019, under the waiver DA 23-914. The lowest conversational gain is 18.0 dB with a hearing aid and 22.3 dB without a hearing aid. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.

Output Power listed is the maximum conducted output power. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 5.0 mm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), simultaneous transmission and product specific (10g SAR) exposure conditions are 1.18 W/kg, 1.18 W/kg, 0.54 W/kg, 1.59 W/kg and 2.99 W/kg, respectively. This device supports 20, 40, 80 and 160 MHz bandwidths modes. HAC-2019, under the waiver DA 23-914. The lowest conversational gain is 18.0 dB with a hearing aid and 22.3 dB without a hearing aid.