T56XK2 Mobile Cellular Phone RF Exposure Info RF Exposure Part 3 Motorola Mobility LLC

Motorola Mobility LLC Mobile Cellular Phone

Page 1 of T56XK2 Mobile Cellular Phone RF Exposure Info RF Exposure Part 3 Motorola Mobility LLC
Page 2 of T56XK2 Mobile Cellular Phone RF Exposure Info RF Exposure Part 3 Motorola Mobility LLC
Page 3 of T56XK2 Mobile Cellular Phone RF Exposure Info RF Exposure Part 3 Motorola Mobility LLC
Page 4 of T56XK2 Mobile Cellular Phone RF Exposure Info RF Exposure Part 3 Motorola Mobility LLC
Page 5 of T56XK2 Mobile Cellular Phone RF Exposure Info RF Exposure Part 3 Motorola Mobility LLC
Page 6 of T56XK2 Mobile Cellular Phone RF Exposure Info RF Exposure Part 3 Motorola Mobility LLC
Page 7 of T56XK2 Mobile Cellular Phone RF Exposure Info RF Exposure Part 3 Motorola Mobility LLC
Page 8 of T56XK2 Mobile Cellular Phone RF Exposure Info RF Exposure Part 3 Motorola Mobility LLC
Page 9 of T56XK2 Mobile Cellular Phone RF Exposure Info RF Exposure Part 3 Motorola Mobility LLC
Page 10 of T56XK2 Mobile Cellular Phone RF Exposure Info RF Exposure Part 3 Motorola Mobility LLC

Calibration Laboratory of
‘ S Schweizerilchor Kallbrlordlunlt
Schmid & Partner C Service sulsse d‘étalonnago
Engineering AG 5 Servizlo Mum dltlmura
leughausstrasso 43. 8004 zuricti, Switzerland 5““ Caliban“ 5mm.
Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108
The Swiss Accreditation Servloo Is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Glossary:
TSL tissue simulating liquid
NORMx,y.z sensitivity in free space
ConvF sensitivity in TSL / NORMx.y.z
DCP diode compression point
CF crest factor (1Iduty7cycle) of the RF signal
A. B, C. D modulation dependent linearization parameters
Polarization to q: rotation around probe axis
Polarization 9 9 rotation around an axis that is in the plane normal to probe axis (at measurement center),
i.e.. 9 = 0 is normal to probe axis
Connector Angle information used in DASY system to align probe sensor X to the robot coordinate system
Calibration is Performed According to the Following Standards:
a)
b)
C)
d)
IEEE Std 1528—2013. “IEEE Recommended Practice for Determining the Peak Spatial-Averaged Specific
Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement
Techniques". June 2013
EC 622094. “Measurement procedure for the assessment of Specific Absorption Rate (SAR) from hand-
held and body-mounted devices used next to the ear (frequency range of 300 MHz to 6 GHz)”. July 2016
IEC 62209-2. "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices
used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)". March 2010
KDB 865664. “SAR Measurement Requirements for 100 MHz to 6 GHz“
Methods Applied and Interpretation of Parameters:
NORMx,y,z.' Assessed for E-field polarization 3 = 0 (f s 900 MHz in TEM-cell; f> 1800 MHz: R22 waveguide).
NORMx.y,2 are only intermediate values, i.e.. the uncertainties of NORMx.y.z does not affect the EZ-fleld
uncertainty inside TSL (see below Cont/F),
NORM(f)x.y,z = NORMx.y,z ' frequencyiresponse (see Frequency Response Chart). This linearization is
implemented in DASY4 software versions later than 4.2. The uncertainty of the frequency response is included
in the stated uncertainty of ConvF.
DCPx.y,z.' DCP are numerical linearization parameters assessed based on the data of power sweep with CW
signal (no uncertainty required) DCP does not depend on frequency nor media.
PAR: PAR is the Peak to Average Ratio that is not calibrated but determined based on the signal
characteristics
Ax. y.z.‘ Bx,y.z; Cx.y.z; Dx.y.z.' VRx,y,z: A, B, C. D are numerical linearization parameters assessed based on
the data of power sweep for specific modulation signal The parameters do not depend on frequency nor
media. VR is the maximum calibration range expressed in RMS voltage across the diode.
Com/F and Boundary Effect Parameters: Assessed in flat phantom using E-field (or Temperature Transfer
Standard for f s 800 MHZ) and inside waveguide using analytical field distributions based on power
measurements forf > 800 MHz. The same setups are used for assessment of the parameters applied for
boundary compensation (alpha. depth) of which typical uncertainty values are given. These parameters are
used in DASY4 software to improve probe accuracy close to the boundary. The sensitivity in TSL corresponds
to NORMx.y.z ‘ ConvF whereby the uncertainty corresponds to that given for Cont/F. A frequency dependent
ConvF is used in DASY version 4.4 and higher which allows extending the validity from t 50 MHz to t 100
MHz.
Spherical isotropy (30 deviation from isotropy): in a field of low gradients realized using a flat phantom
exposed by a patch antenna.
Sensor Offset: The sensor offset corresponds to the offset of virtual measurement center from the probe tip
(on probe axis). No tolerance required.
Connector Angle: The angle is assessed using the information gained by determining the NORMX (no
uncertainty required).
Certificate No: EX3—39547Jan18 Page 2 of 11
EXSDV4 , SN:3954 January 31. 201B
Probe EX3DV4
SN:3954
Manufactured: August 6, 2013
Calibrated: January 31, 2018
Calibrated for DASY/EASY Systems
(Note: non-compatible with DASYZ system!)
Certificate Nu’ EX3-39547Jan1fi Page 3 a! 11
EX3DV4i SN:3954 January 31, 2018
DASY/EASY - Parameters of Probe: EX3DV4 - SN:3954
Basic Calibration Parameters
I Sensor X | Sensor V I Sensor Z Unc (k=2)
Norm JEV/(V/mf? | 0.54 0.44 1 0.53 1 101 °/..
DCP (mVfi I 99.0 101.1 97.0
Modulation Calibration Parameters
4| a
UID Communication System Name A a c D VR Um:
dB dBVuV at: mV (k=2)
0 CW X 0.0 0.0 1.0 0.00 149,4 23.0 96
Y 0.0 0.0 1.0 139.2
2 0.0 0.0 1.0 L 140.5
The reported uncertainty of measurement is stated as the standard uncertainty of measurement
multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage
probability of approximately 95%.
A The uncena'nties of Norm x.v,z dd rial arrest the Ez-fiald uncertainty inside TSL (see Pages 5 and a).
“ Numerical iineauzation parameter: uncertainty not required.
‘ Uncertainty IS determined using the max. deviatlon lrurn linear response applying rectangular dislnbulinn and IS expressed lor 0.9 Square at the
lleld value
Certificate No: EX3—3954_Jan18 Page 4 0' 11
EX3DV4— SN:3954 January 31, 201E
DASYIEASY - Parameters of Probe: EX3DV4 - SN:3954
Calibration Parameter Determined in Head Tissue Simulating Media
Relative Conduclivity Depth ”17 Um:
r (MHz)‘_‘ Pennittlvlty ‘ (SIM) F ConvF x ConvF v Com/F 2 Alan: ° (mm) (it-=2)
750 41.9 0.89 10.72 10.72 10.72 0.29 1.11 112.0 %
835 41.5 L 0.90 10.20 10.20 10.20 0.43 0.80 L x120 1t.
1750 40.1 1.37 8.65 8.65 8.65 J 029 0.85 1 2120 at.
1900 40.0 1.40 8.41 8.41 8.41 0.21 0.99 a 12.0 '11.
2000 40.0 1.40 8.33 8.33 8.33 0.30 0.84 2 12.0 %
2300 39.5 1.07 7.39 7.89 7.89 0.31 0.84 I. 212.0%
2450 1 39.2 1.80 7.49 7.49 7.49 0.35 0.84 2 12.0 %
2600 J 39.0 1.96 7.31 7.31 7.31 0.24 1.08 2 12.0 %
5250 35.9 P 4.71 5.20 5.20 5.20 0.30 1.60 213.1 °/.
5600 35.5 5.07 4.59 4.59 4.59 0.40 1.80 113.1 91.
5750 35.4 5.22 4.74 4.74 4.74 0.40 1.00 a 13.1 %
C Frequenm/ velidity above 300 MHz e1 2 100 MHz only appli- ior DAstr v4 4 and higher (see Page 2), else it Is reelrieled id x 50 MHz. The
uncertainty Is ttie RSS of the (:va unceflainiy at callbretlbn frequencyand the uncertainty fur the indicated lrequaney baud. Frequency validity
below 300 MHz is 2 IO. 25, 40. 50 and 70 MHz tor Convl: assessments at :10, 64. 128, 150 and 220 MHz respectively. Above 5 GHz lrequency
validity can be extended to x 110 MHz.
‘ At lrequencles below 3 GHz. the validity of time parameters (a and (1)0311 be relaxed to x 10% it liqiild mmpensation lonnula is applied to
measured SAR vaiua. At irsquenctas above 3 GHz. the validity bl tissue parameters (e and a) is wsincled lo 2 5% The uncertainty iii the RSS 51
ttie ConvF uncertainty lbr Indicated lame! tissue paramelere.
G Alpha/Depth are determined during calibration. SPEAG warrants that tile remaining deviation due to me boundary edecl alter compensalton e
etways less man e 1% ler lrequenciea below 3 GHz and below 1 2% tor lrequenei'es between 3-0 GHz at any distance larger than nail the pmbe tip
diameter train the buundary.
Ceniiicale No: EX3—3954_Jan18 Page 5 cl 11
EXSDV4~ SN:3954 January 3‘, 201B
DASYIEASY - Parameters of Probe: EX3DV4 - SN:3954
Calibration Parameter Determined in Body Tissue Simulating Media
Rolniva Conductivity Depth " Unc
f (m " Pormmlvlty’ (Slm) ‘ ConvF x Com/F v eonyr z Alph. G (in...) (k=z)
750 55.5 0.96 10.21 10.21 10.21 0.41 0.84 1 12.0 %
835 f 55.2 L 0.97 V 10.02 10.02 10.02 1 0.40 0.85 212.0 %
1750 53.4 1.49 8.31 8.31 8.31 0.35 0.86 r £120 %
1900 53.3 1.52 L 8.03 8.03 8.03 _ 0.41 i 0.85 1 12.0 %
2300 52.8 1.81 7.74 F 7.74 7.74 0.46 0.50 212.0 %
2450 52.7 1.95 7.53 7.53 7.53 0.34 0.88 1 12.0 %
2600 52.5 2.16 i 6.92 6.92 6.92 0.27 r 1.05 2 12.0 %
5250 48.9 5.36 4.62 4.62 4.62 0.35 1.90 i 13.1 91.
5600 48.5 5.77 4.05 4.05 4.05 0.40 1.90 1 13.1 %
5750 43.3 5.94 4.18 4.16 4.18 A 0.40 1.90 213.1 %
‘ Freq-Janey validity above 300 MHz 0' e 100 MHz only applies ior DASY v4.4 and higher (see Page 2). else it is restricted lo 2 50 MHz. The
uncertainty is Inc RSS oi the Com/F unceflainly at calibvailcln lrequency and the uncenainty lor the lndicetell frequency band. Frequency validity
belaw 300 MHz is 2 10. 25. 40. 50 and 70 MHz lei Com/F assessments in 30. 64. 128, 150 and 220 MHz respectlvety. Name 5 GHz lreqneney
validity can be extended to x 110 MHz.
‘ Al trequencles below 3 GHz. the yallnlty el lissue paramelers (e and t1)l:an be relaxed to 1 1011. if liquid compensation tunnels is appliad to
measured SAR values. At irequeneies above 3 GHz. the yaIidlty oi tissue Daramelers (e and a) Is restn'etea to e 5%. The uncanalmy is the RSS oi
the 1::va uncertalnly for indicated target tissue parameters.
5 Alpha/Benin are determined nunng calibnah'on. SFEAG walrams that tile runernlng deflation due in the boundary enect efler compensation is
always less than 3 1% tor lreeuencies below 3 3H; and below e 2% (or frequencies between 35 GHz at any distance larger ihan hell the probe tip
diameler mm the boundary.
Cenliicate No: EX3-3954_Jan18 Page 6 of 11
EXSDV4— SN:3954 January 31. 2018
Frequency Response of E-Field
(TEM-Cellzifi1 10 EXX, Waveguide: R22)
Frequency response (normalized)
= . . . ‘ = ,
1500 2000 25'ou
f[MHz]
Uncertainty o! anuency Response 0' E-fleld: t 6.3% (k=2)
Certificate Nu: EX3-39547Jan18 Page 7 of 11
EX3DV4— SN:3954
January 31, 2018
Receiving Pattern (4;), 9 = 0"
f=600 MHz,TEM
e 7% .
O D 0
Ta x Y
N.
f=1800 MHz,R22
o a I m . a 0
Tot x Y z
05
' {1130'
$1.2
Run
60%;
i 1
so 100
IEdaHz ZSEHZ
Uncertalnty of Axial lsotropy Assessment: 1 0.5% (k=2)
Certificate No: EX3»3954,Jan16
Page 8 o! 11
EXSDV4— SN:3954 January 31, 2018
Dynamic Range f(SARh.,d)
(TEM cell , f.,,..= 1900 MHz)
105
‘3
Input Signal [uV]
<3;
«ll—E
101
10’ 10'2 101 10‘
SAR [mWIcma]
I]
not compensated magma
l ‘
10° 110'
SAR [mW/cm3]
[E
not oompensmd comps nod
Una-minty of Lino-my Agustin-m: t 0.6% (“2)
Certificaie No: EX3>3954~Jan18 Page 9 o! 11
EX3DV4— SN:3954 January 31, 2018
Conversion Factor Assessment
1= B35 MHZ.WGLS R9 (H_convF) V= 1900 MHz.WGLS R22 (H_convF)
..
as. V",
n "\_ :5 '
g 4’ 4 :o‘
a a ’5'
..
no , “V ' ' f - . .
“r... "M .33.. mm. " ‘ "an.
Deviation from lsotropy in Liquid
Error (d), S), f= 900 MHz
-1.0 -0.6 ~05 ~04 ~02 0.0 0.2 0.4 0.6 0.8 1.0
Uncertainty of Spherical Isotropy Assnssment: t 2.6% (k=2)
Certificate No: EX3<3954LJan16 Page 10 cl 11
EXSDV4— SN:3954 January 31‘ 201B
DASY/EASY - Parameters of Probe: EX3DV4 - SN:3954
Other Probe Parameters
Sensor Arrangement Triangular
Connector Angle (°) 70.4
Mechanical Surface Detection Mode enabled
Optical Surface Detection Mode disabled
Probe Overall Length 337 mm
Probe Body Diameter 1 10 mm
Tip Length 9 mm
Tip Diameter 25 mm
Probe Tip to Sensor X Calibration Point ‘ 1 mm
Probe Tip to Sensor Y Calibration Point 1 mm
Probe Tip to Sensor Z Calibration Point 1 mml
Recommended Measurement Distance from Surface 1.4 mm
Cartiflcale No: EX3-39547Jan18 Page 11 of 11
Download: T56XK2 Mobile Cellular Phone RF Exposure Info RF Exposure Part 3 Motorola Mobility LLC
Mirror Download [FCC.gov]T56XK2 Mobile Cellular Phone RF Exposure Info RF Exposure Part 3 Motorola Mobility LLC
Document ID3945302
Application IDMH95O8YvrSciatVW63T0MQ==
Document DescriptionRF Exposure Part 3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize114.97kB (1437068 bits)
Date Submitted2018-07-31 00:00:00
Date Available2018-08-08 00:00:00
Creation Date2018-07-30 16:07:33
Producing SoftwareFoxit PhantomPDF - Foxit Software Inc.
Document Lastmod2018-07-30 16:40:28
Document TitleRF Exposure Part 3
Document Author: Yanying

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : Yanying
Create Date                     : 2018:07:30 16:07:33
Modify Date                     : 2018:07:30 16:40:28+08:00
Producer                        : Foxit PhantomPDF - Foxit Software Inc.
Has XFA                         : No
Page Count                      : 10