FCC ID IKQNEXC2

Dual Channel Full HD Smart Dash Camera

by Scosche Industries Inc

Grantee Code: IKQ   Product Code: NEXC2
Latest application date: 2019-08-16

FCC ID Device Details

FCC IDIKQNEXC2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeIKQ
Product CodeNEXC2
Applicant BusinessScosche Industries Inc 🇺🇸
Related Domains scosche.com
Equipment ClassDual Channel Full HD Smart Dash Camera
Test FirmShenzhen NTEK Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2019-08-16
2402-2480 MHzOriginal Equipment2019-08-16
5180-5240 MHzOriginal Equipment2019-08-16

Exhibits

DocumentTypeAvailableFile
NEXC2_Ueser_ManualUsers Manual2020-02-12PDF 326.4 KB
INT_PHOTOInternal Photos2020-02-12PDF 1.8 MB
EXT_PHOTOExternal Photos2019-08-16PDF 713.3 KB
NEXC2_LabelID Label/Location Info2019-08-16PDF 245.9 KB
Test_Setup_photoTest Setup Photos2020-02-12PDF 306 KB
Test_Setup_photoTest Setup Photos2020-02-12PDF 266 KB
Test_Setup_photoTest Setup Photos2020-02-12PDF 227.7 KB
S19032201910001-EDR R1Test Report2019-08-16PDF 1.4 MB
S19032201910002-BLE R1Test Report2019-08-16PDF 1 MB
S19032201910003-2.4GWIFITest Report2019-08-16PDF 1.5 MB
S19032201910004-5GWIFI R1Test Report2019-08-16PDF 2.2 MB
Agent_Authorization_RevCover Letter(s)2019-08-16PDF 136 KB
Agent_Authorization_Rev_1.0-signedCover Letter(s)2019-08-16PDF 136 KB
FCC_Short_&_Long_Term_ConfidentialityCover Letter(s)2019-08-16PDF 199.8 KB
FCC_Software_Configuration_Control_DeclarationCover Letter(s)2019-08-16PDF 182.4 KB
FCC MPE Estimation Report R1RF Exposure Info2019-08-16PDF 653.8 KB
NEXC2_BLOCK Metadata onlyBlock DiagramPDF 37.7 KB
NEXC2_SCH Metadata onlySchematicsPDF 930.5 KB
NEXC2_SCH R1 Metadata onlySchematicsPDF 930.5 KB
NEXC2_OPS Metadata onlyOperational DescriptionPDF 328.8 KB
FCC_Software_Security_Requirements Metadata onlySDR Software/Security InfPDF 217.6 KB

Application Information

Application IDlmjbRq1qxJyVgbpdo8ln7g==
Final Action Date2019-08-16
Application PurposeOriginal Equipment
Applicant FRN0012561791
ModelNEXC2
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionDual Channel Full HD Smart Dash Camera
Responsible PartyMark Larson, SR Product Manager, mlarson@scosche.com , 805-486-4450
Technical ContactScosche Industries Inc, mlarson@scosche.com
Test FirmAlex Li, Shenzhen NTEK Testing Technology Co., Ltd., certification@ntek.org.cn , +86-755-6115-9384
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date02/12/2020
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
lmjbRq1qxJyVgbpdo8ln7g==2019-08-16Original Equipment
fQSuufCC+2DYaLeF4iCX0g==2019-08-16Original Equipment
+AjjMb2eyl5/Xv9XwAbCJA==2019-08-16Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.00190515CCC
2402-2480 MHz0.002661015CCC
2412-2462 MHz0.02454715CCC
5180-5240 MHz0.01174915E38, CC
5745-5825 MHz0.01318315E38, CC

Grants

TCB Grant - Application lmjbRq1qxJyVgbpdo8ln7g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 08/16/2019

Application Dated: 08/16/2019
Scosche Industries Inc
1550 Pacific Ave
Oxnard, CA 93033
 
Attention: Mark Larson , SR Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  IKQNEXC2
Name of Grantee:  Scosche Industries Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Dual Channel Full HD Smart Dash Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002661  

Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application lmjbRq1qxJyVgbpdo8ln7g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Scosche Industries Inc
1550 Pacific Ave
Oxnard, CA 93033
United States
  Date of Grant: 08/16/2019

Application Dated: 08/16/2019
 
Attention: Mark Larson , SR Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  IKQNEXC2
Name of Grantee:  Scosche Industries Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Dual Channel Full HD Smart Dash Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.002661  

Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application fQSuufCC+2DYaLeF4iCX0g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 08/16/2019

Application Dated: 08/16/2019
Scosche Industries Inc
1550 Pacific Ave
Oxnard, CA 93033
 
Attention: Mark Larson , SR Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  IKQNEXC2
Name of Grantee:  Scosche Industries Inc
Equipment Class: Digital Transmission System
Notes: Dual Channel Full HD Smart Dash Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.001905  
CC 15C 2412.0  -  2462.0 0.024547  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application fQSuufCC+2DYaLeF4iCX0g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Scosche Industries Inc
1550 Pacific Ave
Oxnard, CA 93033
United States
  Date of Grant: 08/16/2019

Application Dated: 08/16/2019
 
Attention: Mark Larson , SR Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  IKQNEXC2
Name of Grantee:  Scosche Industries Inc
Equipment Class: Digital Transmission System
Notes: Dual Channel Full HD Smart Dash Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.001905  
CC 15C 2412.0  -  2462.0 0.024547  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application +AjjMb2eyl5/Xv9XwAbCJA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 08/16/2019

Application Dated: 08/16/2019
Scosche Industries Inc
1550 Pacific Ave
Oxnard, CA 93033
 
Attention: Mark Larson , SR Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  IKQNEXC2
Name of Grantee:  Scosche Industries Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Dual Channel Full HD Smart Dash Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.011749  
38 CC 15E 5745.0  -  5825.0 0.013183  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application +AjjMb2eyl5/Xv9XwAbCJA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Scosche Industries Inc
1550 Pacific Ave
Oxnard, CA 93033
United States
  Date of Grant: 08/16/2019

Application Dated: 08/16/2019
 
Attention: Mark Larson , SR Product Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  IKQNEXC2
Name of Grantee:  Scosche Industries Inc
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Dual Channel Full HD Smart Dash Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.011749  
38 CC 15E 5745.0  -  5825.0 0.013183  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: