RTHM24 Armband Heart Rate Monitor RF Exposure Info SZEM180500412603 MPE RPTx Scosche Industries Inc

Scosche Industries Inc Armband Heart Rate Monitor

Page 1 of RTHM24 Armband Heart Rate Monitor RF Exposure Info SZEM180500412603 MPE RPTx Scosche Industries Inc
Page 2 of RTHM24 Armband Heart Rate Monitor RF Exposure Info SZEM180500412603 MPE RPTx Scosche Industries Inc
Page 3 of RTHM24 Armband Heart Rate Monitor RF Exposure Info SZEM180500412603 MPE RPTx Scosche Industries Inc
Page 4 of RTHM24 Armband Heart Rate Monitor RF Exposure Info SZEM180500412603 MPE RPTx Scosche Industries Inc
Page 5 of RTHM24 Armband Heart Rate Monitor RF Exposure Info SZEM180500412603 MPE RPTx Scosche Industries Inc
Page 6 of RTHM24 Armband Heart Rate Monitor RF Exposure Info SZEM180500412603 MPE RPTx Scosche Industries Inc
Page 7 of RTHM24 Armband Heart Rate Monitor RF Exposure Info SZEM180500412603 MPE RPTx Scosche Industries Inc

SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
No. 1 Workshop, M-10, Middle section, Science & Technology Park,
Shenzhen, Guangdong, China 518057
Telephone:
+86 (0) 755 2601 2053
Fax:
+86 (0) 755 2671 0594
Email:
ee.shenzhen@sgs.com
Report No.: SZEM180500412603
Page:
1 of 7
Cover page
SAR Evaluation Report
Application No.:
SZEM1805004126CR
Applicant:
Scosche Industries Inc
Address of Applicant:
1550 Pacific Ave, Oxnard, California, United States, 93033
Manufacturer:
Scosche Industries Inc
Address of Manufacturer:
1550 Pacific Ave, Oxnard, California, United States, 93033
Factory:
Scosche Industries Inc
Equipment Under Test (EUT):
EUT Name:
Armband Heart Rate Monitor
Model No.:
RTHM24
FCC ID:
IKQRTHM24
Trade mark:
scosche
Standard(s) :
47 CFR Part 1.1307
47 CFR Part 2.1093
KDB447498D01 General RF Exposure Guidance v06
Date of Receipt:
2018-05-17
Date of Test:
2018-05-22 to 2018-05-24
Date of Issue:
2018-05-28
Test Result:
Pass*
In the configuration tested, the EUT complied with the standards specified above.
Keny Xu
EMC Laboratory Manager
The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report.
If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new
system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International
Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International
Electrical Approvals in writing.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180500412603
Page:
2 of 7
Version
Revision Record
Version
Chapter
01
Date
2018-05-28
Modifier
Remark
Original
Authorized for issue by:
Moon Zhang /Project Engineer
Eric Fu /Reviewer
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only
and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180500412603
Page:
3 of 7
Contents
Page
COVER PAGE .............................................................................................................................................. 1
VERSION ...................................................................................................................................................... 2
CONTENTS .................................................................................................................................................. 3
GENERAL INFORMATION .......................................................................................................................... 4
4.1
4.2
4.3
4.4
4.5
4.6
GENERAL DESCRIPTION OF EUT ............................................................................................................. 4
TEST LOCATION...................................................................................................................................... 5
TEST FACILITY........................................................................................................................................ 5
DEVIATION FROM STANDARDS ................................................................................................................. 6
ABNORMALITIES FROM STANDARD CONDITIONS ....................................................................................... 6
OTHER INFORMATION REQUESTED BY THE CUSTOMER ............................................................................. 6
SAR EVALUATION ...................................................................................................................................... 7
5.1
RF EXPOSURE COMPLIANCE REQUIREMENT ............................................................................................ 7
5.1.1 Standard Requirement ..................................................................................................................... 7
5.1.2 Limits ................................................................................................................................................ 7
5.1.3 EUT RF Exposure ......................................................................................................................... 7-8
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only
and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180500412603
Page:
4 of 7
General Information
4.1 General Description of EUT
Power supply:
BATTERY: 3.7V Li-ion battery 160mAh 0.6Wh
DC 5V POWERED BY USB PORT
Cable:
USB CABEL:110CM UNSHIELDED
Antenna Gain
0 dBi
Antenna Type
Micro strip
Bluetooth LE:
Channel Spacing
2MHz
Modulation Type
GFSK
Number of Channels
40
Sample Type:
Portable production
Bluetooth Version:
4.0 BT Signal mode
Bluetooth LE
Operation Frequency
2402MHz to 2480MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only
and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180500412603
Page:
5 of 7
4.2 Test Location
All tests were performed at:
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch
No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China
518057
Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594
No tests were sub-contracted.
4.3 Test Facility
The test facility is recognized, certified, or accredited by the following organizations:
• CNAS (No. CNAS L2929)
CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC
Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration
Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration
Laboratories) for the competence in the field of testing.
• A2LA (Certificate No. 3816.01)
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the
American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01.
• VCCI
The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz,
Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port
Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have
been registered in accordance with the Regulations for Voluntary Control Measures with Registration
No.: G-20026, R-14188, C-12383 and T-11153 respectively.
• FCC –Designation Number: CN1178
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized
as an accredited testing laboratory.
Designation Number: CN1178. Test Firm Registration Number: 406779.
• Industry Canada (IC)
Two 3m Semi-anechoic chambers and the 10m Semi-anechoic chamber of SGS-CSTC Standards
Technical Services Co., Ltd. Shenzhen Branch EMC Lab have been registered by Certification and
Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620C-1,
4620C-2, 4620C-3.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only
and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180500412603
Page:
6 of 7
4.4 Deviation from Standards
None.
4.5 Abnormalities from Standard Conditions
None.
4.6 Other Information Requested by the Customer
None.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only
and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180500412603
Page:
7 of 7
SAR Evaluation
5.1 RF Exposure Compliance Requirement
5.1.1 Standard Requirement
According to KDB447498D01 General RF Exposure Guidance v06
4.3.1. Standalone SAR test exclusion considerations
Unless specifically required by the published RF exposure KDB procedures, standalone 1-g
head or body and 10-g extremity SAR evaluation for general population exposure conditions, by
measurement or numerical simulation, is not required when the corresponding SAR Exclusion
Threshold condition, listed below, is satisfied.
5.1.2 Limits
The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances
≤ 50 mm are determined by:
[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ¡
[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where
 f(GHz) is the RF channel transmit frequency in GHz
 Power and distance are rounded to the nearest mW and mm before calculation17
 The result is rounded to one decimal place for comparison
The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and
for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation
distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion
5.1.3 EUT RF Exposure
Bluetooth LE:
The Max. power (including tune-up tolerance) is 3.13 dBm on the lowest channel
3.13 dBm logarithmic terms convert to numeric result is nearly 2.06 mW
According to the formula. calculate the test exclusion thresholds:
General RF Exposure 
. 
  ,       

 .  ! !   !
,
General RF Exposure = (2.06 mW / 5 mm) x √2.48 GHz = 0.65
SAR requirement:
S = 3.0
(1) < (2)
So the SAR report is not required.
, 
∗
2.48
GHz (*)

(1)
(2)
(*) Max. power refer to Report No.:SZEM180500412602
So the SAR report is not required.
- End of the Report -
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only
and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
Download: RTHM24 Armband Heart Rate Monitor RF Exposure Info SZEM180500412603 MPE RPTx Scosche Industries Inc
Mirror Download [FCC.gov]RTHM24 Armband Heart Rate Monitor RF Exposure Info SZEM180500412603 MPE RPTx Scosche Industries Inc
Document ID3912625
Application IDHIpJEG9TUUjf8c8zkcmWAw==
Document DescriptionRF Exposure Info
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize13.35kB (166897 bits)
Date Submitted2018-07-05 00:00:00
Date Available2018-07-05 00:00:00
Creation Date2018-06-14 19:45:22
Producing SoftwareGPL Ghostscript 8.64
Document Lastmod2018-06-14 11:45:23
Document TitleSZEM180500412603 MPE RPTx
Document CreatorPScript5.dll Version 5.2.2
Document Author: Moon-HJ_Zhang

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Page Count                      : 7
Create Date                     : 2018:06:14 19:45:22+08:00
Title                           : Microsoft Word - SZEM180500412603 MPE RPT.docx
Producer                        : GPL Ghostscript 8.64
Author                          : Moon-HJ_Zhang
Creator                         : PScript5.dll Version 5.2.2
Modify Date                     : 2018:06:14 11:45:23Z