1. FCC ID
  2. IMA
  3. IMA-P2085A

FCC ID IMA-P2085A

P2085A-Q806AZ-H35BM

by Technisonic Industries Limited

Grantee Code: IMA   Product Code: P2085A
Latest application date: 2008-02-27

FCC ID Device Details

FCC IDIMA-P2085A
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeIMA
Product CodeP2085A
Applicant BusinessTechnisonic Industries Limited 🇨🇦
Related Domains til.ca
Equipment ClassP2085A-Q806AZ-H35BM
Test FirmUltraTech Engineering Labs Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
136-174 MHzClass II permissive change or modification of presently authorized equipment2008-02-27
136-174 MHzOriginal Equipment2002-04-17

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2002-04-17PDF 173.6 KB
Internal photosInternal Photos2002-04-17PDF 1.3 MB
External photosExternal Photos2002-04-17PDF 269.8 KB
FCC ID Label on the Modular TransceiverID Label/Location Info2002-04-17PDF 3.7 KB
FCC ID Label on the OEM ProductID Label/Location Info2002-04-17PDF 15.5 KB
FCC ID LocationID Label/Location Info2002-04-17PDF 5.9 KB
Revised FCC ID label for the OEM ProductID Label/Location Info2002-04-17PDF 5.7 KB
Test setup photosTest Setup Photos2002-04-17PDF 488.6 KB
Measurement plots 1 to 9Test Report2002-04-17PDF 567.5 KB
Measurement plots 10 to 18Test Report2002-04-17PDF 631.2 KB
Measurement plots 19 to 24Test Report2002-04-17PDF 380.3 KB
Measurement plots 25 to 30Test Report2002-04-17PDF 86.3 KB
Measurement plots 31 to 34Test Report2002-04-17PDF 59.1 KB
Test reportTest Report2002-04-17PDF 1.1 MB
Extended Frequecy Range RequestAttestation Statements2008-02-27PDF 15.5 KB
Manufacturer DeclarationAttestation Statements2008-02-27PDF 14.5 KB
Authority to act as an agent to FCCAttestation Statements2002-04-17PDF 11.1 KB
Request for confidentiality filingAttestation Statements2002-04-17PDF 10 KB
Authority LetterCover Letter(s)2008-02-27PDF 15.4 KB
Cover LetterCover Letter(s)2008-02-27PDF 95.7 KB
cover letterCover Letter(s)2002-04-17PDF 56.8 KB
RF Exposure InformationRF Exposure Info2002-04-17PDF 9.2 KB
Tune up informationParts List/Tune Up Info2002-04-17PDF 12.7 KB
Block diagarm 1 Metadata onlyBlock DiagramPDF 97.5 KB
Block diagram 2 Metadata onlyBlock DiagramPDF 99.8 KB
Schematic 1 Metadata onlySchematicsPDF 169.4 KB
Schematic 2 Metadata onlySchematicsPDF 178.4 KB
Operational description Metadata onlyOperational DescriptionPDF 83.2 KB
Parts List 1 Metadata onlyParts List/Tune Up InfoPDF 245.8 KB
Parts List 2 Metadata onlyParts List/Tune Up InfoPDF 376.7 KB

Application Information

Application IDM7IUYyoG/9SYGlKzurJ/PQ==
Final Action Date2008-02-27
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0004381299
Model-P2085A
Frequency Range136-174 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionP2085A-Q806AZ-H35BM
Responsible PartySteve McIntosh, Engineering Manager, stevem@til.ca , 905 890-2113
AgentTri Tri Tri, Ultratech Engineering Labs Inc., tri@ultratech-labs.com , 905-829-1570
Technical ContactTri M Luu, Ultratech Engineering Labs Inc., tri@ultratech-labs.com , 905-829-1570
Test FirmDharmajit Solanki, UltraTech Engineering Labs Inc., dharmajit@ultratech-labs.com , 905-829-1570
TCB Emailvic@ultratech-labs.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower is conducted. Part 90.210 is single channel mode. Antenna gain for 1/4 wave dipole is not to exceed 3 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 70 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change application is to correct the emission designator from 9K80F1D to 8K10 F1E for digital voice modulation.

Applications

Application IDDatePurpose
M7IUYyoG/9SYGlKzurJ/PQ==2008-02-27Class II permissive change or modification of presently authorized equipment
xnPuI2mr4sOZcWEi1/XOeA==2002-04-17Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
136-174 MHz5.72.5ppm11K0F3E90.21
136-174 MHz5.72.5ppm16K0F3E9
136-174 MHz5.72.5ppm9K80F1D90.21
136-174 MHz5.72.5ppm8K10F1E90.21

Grants

TCB Grant - Application xnPuI2mr4sOZcWEi1/XOeA==

This application does not exist.

EAS Grant - Application xnPuI2mr4sOZcWEi1/XOeA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Technisonic Industries Limited
240 Traders Blvd. E.
Mississauga, Ontario, L4Z 1W7
Canada 		  Date of Grant: 04/17/2002

Application Dated: 02/27/2002
 
Attention: Steve McIntosh , Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  IMA-P2085A
Name of Grantee:  Technisonic Industries Limited
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: P2085A-Q806AZ-H35BM
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
90.210 136.0  -  174.0 5.7 2.5  PM 11K0F3E
90 136.0  -  174.0 5.7 2.5  PM 16K0F3E
90.210 136.0  -  174.0 5.7 2.5  PM 9K80F1D

Power is conducted.

Part 90.210 is single channel mode.

Antenna gain for 1/4 wave dipole is not to exceed 3 dBi.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 70 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application M7IUYyoG/9SYGlKzurJ/PQ==

Mail To:
Tri Luu, Authorized Agent
Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville, Ontario, L6H 6G4
Canada
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Ultratech Engineering Labs Inc.
3000 Bristol Circle
Oakville Ontario, L6H 6G4
Canada 		Date of Grant: 02/27/2008

Application Dated: 02/27/2008
Technisonic Industries Limited
240 Traders Blvd. E.
Mississauga, Ontario, L4Z 1W7
Canada
 
Attention: Steve McIntosh , Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  IMA-P2085A
Name of Grantee:  Technisonic Industries Limited
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: P2085A-Q806AZ-H35BM
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
90.210 136.0  -  174.0 5.7 2.5  PM 11K0F3E
90 136.0  -  174.0 5.7 2.5  PM 16K0F3E
90.210 136.0  -  174.0 5.7 2.5  PM 8K10F1E

Power is conducted. Part 90.210 is single channel mode. Antenna gain for 1/4 wave dipole is not to exceed 3 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 70 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change application is to correct the emission designator from 9K80F1D to 8K10 F1E for digital voice modulation.


EAS Grant - Application M7IUYyoG/9SYGlKzurJ/PQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Technisonic Industries Limited
240 Traders Blvd. E.
Mississauga, Ontario, L4Z 1W7
Canada 		  Date of Grant: 02/27/2008

Application Dated: 02/27/2008
 
Attention: Steve McIntosh , Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  IMA-P2085A
Name of Grantee:  Technisonic Industries Limited
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: P2085A-Q806AZ-H35BM
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
90.210 136.0  -  174.0 5.7 2.5  PM 11K0F3E
90 136.0  -  174.0 5.7 2.5  PM 16K0F3E
90.210 136.0  -  174.0 5.7 2.5  PM 8K10F1E

Power is conducted. Part 90.210 is single channel mode. Antenna gain for 1/4 wave dipole is not to exceed 3 dBi. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 70 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change application is to correct the emission designator from 9K80F1D to 8K10 F1E for digital voice modulation.



Mail To: