FCC ID IOMZ1059
KENWOOD Motorsports CAM
by JVCKENWOOD Corporation
Grantee Code: IOM Product Code: Z1059
Latest application date: 2021-05-31
FCC ID Device Details
| FCC ID | IOMZ1059 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | IOM |
| Product Code | Z1059 |
| Applicant Business | JVCKENWOOD Corporation 🇯🇵 |
| Related Domains |  jvckenwood.com  dekra.com |
| Equipment Class | KENWOOD Motorsports CAM |
| Test Firm | DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5745-5825 MHz | Original Equipment | 2021-05-31 |
| 2412-2462 MHz | Original Equipment | 2021-05-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2021-05-31 | PDF 5.5 MB |
| Internal Photos | Internal Photos | 2021-05-31 | PDF 1.6 MB |
| External Photos | External Photos | 2021-05-31 | PDF 815.2 KB |
| ID Label | ID Label/Location Info | 2021-05-31 | PDF 110.1 KB |
| Label Location | ID Label/Location Info | 2021-05-31 | PDF 402 KB |
| Test Setup Photos_NII | Test Setup Photos | 2021-05-31 | PDF 821.1 KB |
| Test Report_DTS | Test Report | 2021-05-31 | PDF 3.4 MB |
| Test Report_NII | Test Report | 2021-05-31 | PDF 3.8 MB |
| Confidentiality Request | Cover Letter(s) | 2021-05-31 | PDF 27.6 KB |
| Declaration of authorization | Cover Letter(s) | 2021-05-31 | PDF 29.7 KB |
| RF exposure report | RF Exposure Info | 2021-05-31 | PDF 288 KB |
| Block Diagram Metadata only | Block Diagram | PDF 2.4 MB | |
| Schematics Metadata only | Schematics | PDF 1.1 MB | |
| Operational Description Metadata only | Operational Description | PDF 100.3 KB |
Application Information
| Application ID | zzqYkM6Mxn6zaGIRWiwE4g== |
|---|---|
| Final Action Date | 2021-05-31 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0017389966 |
| Model | Z1059 |
| Frequency Range | 5745-5825 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | KENWOOD Motorsports CAM |
| Responsible Party | Kazumi Iwata, Manager, iwata-kazumi@jvckenwood.com , 81-42-646-5525 |
| Technical Contact | Frank Yen, DEKRA Testing and Certification Co., Ltd., Frank.yen@dekra.com , 886-2-8601-3788 |
| Non-Technical Contact | Frank Yen, DEKRA Testing and Certification Co., Ltd., Frank.yen@dekra.com , 886-2-8601-3788 |
| Test Firm | Mirenda Liao, DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou, mirenda.liao@dekra.com , +886-2-2602-7968 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except for the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5775 MHz. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| zzqYkM6Mxn6zaGIRWiwE4g== | 2021-05-31 | Original Equipment |
| WGyibdjSuBqRv2rRYEiuYA== | 2021-05-31 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application zzqYkM6Mxn6zaGIRWiwE4g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/31/2021 Application Dated: 05/12/2021 |
| JVCKENWOOD Corporation |
| 2967-3, Ishikawa-machi |
| Hachioji-shi |
| Tokyo, 192-8525 Japan |
| Attention: Kazumi Iwata , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IOMZ1059 |
| Name of Grantee: | JVCKENWOOD Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | KENWOOD Motorsports CAM |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5745.0 - 5825.0 | 0.015 |
| Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except for the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5775 MHz. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application zzqYkM6Mxn6zaGIRWiwE4g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
JVCKENWOOD Corporation 2967-3, Ishikawa-machi Hachioji-shi Tokyo, 192-8525 Japan |
Date of Grant: 05/31/2021 Application Dated: 05/12/2021 |
| Attention: Kazumi Iwata , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IOMZ1059 |
| Name of Grantee: | JVCKENWOOD Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | KENWOOD Motorsports CAM |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5745.0 - 5825.0 | 0.015 |
| Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except for the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5775 MHz. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/31/2021 Application Dated: 05/12/2021 |
| JVCKENWOOD Corporation |
| 2967-3, Ishikawa-machi |
| Hachioji-shi |
| Tokyo, 192-8525 Japan |
| Attention: Kazumi Iwata , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IOMZ1059 |
| Name of Grantee: | JVCKENWOOD Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | KENWOOD Motorsports CAM |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.14 |
| Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except for the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application WGyibdjSuBqRv2rRYEiuYA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
JVCKENWOOD Corporation 2967-3, Ishikawa-machi Hachioji-shi Tokyo, 192-8525 Japan |
Date of Grant: 05/31/2021 Application Dated: 05/12/2021 |
| Attention: Kazumi Iwata , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IOMZ1059 |
| Name of Grantee: | JVCKENWOOD Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | KENWOOD Motorsports CAM |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.14 |
| Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except for the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |