FCC ID IR5DT13
Intel Wireless-AC-9260
by MilDef Crete Inc.
Grantee Code: IR5 Product Code: DT13
Latest application date: 2019-09-16
FCC ID Device Details
| FCC ID | IR5DT13 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | IR5 |
| Product Code | DT13 |
| Applicant Business | MilDef Crete Inc. 🇹🇼 |
| Related Domains |  mail.crete.com.tw  wts-lab.com |
| Equipment Class | Intel Wireless-AC-9260 |
| Test Firm | Worldwide Testing Services (Taiwan) Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-09-16 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-09-16 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2019-09-16 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017 | 2019-06-20 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017 | 2019-06-20 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017 | 2019-06-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2019-09-16 | PDF 1.2 MB |
| Internal Photos | Internal Photos | 2019-09-16 | PDF 4 MB |
| Internal photo | Internal Photos | 2019-09-16 | PDF 4 MB |
| External Photos | External Photos | 2019-09-16 | PDF 727.9 KB |
| External photo | External Photos | 2019-09-16 | PDF 727.9 KB |
| 9260NGW- Expho | External Photos | 2019-06-20 | PDF 170 KB |
| ID Label/Location Info | ID Label/Location Info | 2019-09-16 | PDF 276.6 KB |
| 9260NGW- LabelLoc | ID Label/Location Info | 2019-06-20 | PDF 106.4 KB |
| 9260NGW- Labelsmpl | ID Label/Location Info | 2019-06-20 | PDF 183.3 KB |
| Test Setup Photos | Test Setup Photos | 2019-09-16 | PDF 822.3 KB |
| Test setup photo_RF | Test Setup Photos | 2019-09-16 | PDF 822.3 KB |
| Test Report_DTS_Part 1 | Test Report | 2019-09-16 | PDF 5.9 MB |
| Test Report_DTS_Part 2 | Test Report | 2019-09-16 | PDF 2 MB |
| Test Report_JBP | Test Report | 2019-09-16 | PDF 3.8 MB |
| Test Report_NII_Part 1 | Test Report | 2019-09-16 | PDF 6 MB |
| Test Report_NII_Part 2 | Test Report | 2019-09-16 | PDF 445 KB |
| Test Report_SAR_Part 1 | RF Exposure Info | 2019-09-16 | PDF 4.7 MB |
| Test Report_SAR_Part 2 | RF Exposure Info | 2019-09-16 | PDF 3 MB |
| 9260NGW - ATTESTATION | Cover Letter(s) | 2019-06-20 | PDF 19.3 KB |
| Authorization letter | Cover Letter(s) | 2019-09-16 | PDF 54.1 KB |
| Confidentiality | Cover Letter(s) | 2019-09-16 | PDF 36.6 KB |
| Declaration Letter (Close 5GHz WiFi B2A,2C function) | Cover Letter(s) | 2019-09-16 | PDF 71.3 KB |
| FCC Class II permissive change letter | Cover Letter(s) | 2019-09-16 | PDF 178.6 KB |
| authorization letter | Cover Letter(s) | 2019-09-16 | PDF 54.1 KB |
| confidentiality | Cover Letter(s) | 2019-09-16 | PDF 36.6 KB |
| 9260NGW - Declaration of authorization | Cover Letter(s) | 2019-06-20 | PDF 21.3 KB |
| 9260NGW- Declaration letter for electrically identical | Cover Letter(s) | 2019-06-20 | PDF 98.4 KB |
| 9260NGW- FCC Auth Ltr for Change of ID | Cover Letter(s) | 2019-06-20 | PDF 86.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 274.4 KB | |
| Antenna spec Metadata only | Operational Description | PDF 938.3 KB | |
| Antenna specification Metadata only | Operational Description | PDF 938.3 KB | |
| NII Software Security Info Metadata only | Operational Description | PDF 51.3 KB |
Application Information
| Application ID | z4DYEyDWj4HRmDPv3XHp5A== |
|---|---|
| Final Action Date | 2019-09-16 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0011213410 |
| Model | DT13 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Intel Wireless-AC-9260 |
| Responsible Party | Willie Liang, Manager, williel@mail.crete.com.tw , 886-2-2662-6074 |
| Agent | Dana Dana Dana, Worldwide Testing Services (Taiwan) Co.,Ltd., dana@wts-lab.com , 886-2-6606-8877 |
| Technical Contact | Danny Sung, Worldwide Testing Services (Taiwan) Co., Ltd., danny@wts-lab.com , 886-2-6606-8877 |
| Non-Technical Contact | Dana Chang, Worldwide Testing Services (Taiwan) Co., Ltd., dana@wts-lab.com , 886-2-6606-8877 |
| Test Firm | Danny Sung, Worldwide Testing Services (Taiwan) Co., Ltd., danny@wts-lab.com , 886-2-6606-8877 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Permissive change II: This Class II Change is to a) incorporate/install the module into the dedicated host of Laptop Computer (DT13) as described in this filing. b) power decreasing via software. The highest reported SAR values for near-body, and simultaneous transmission use conditions are 0.65 W/kg, and 1.23 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| z4DYEyDWj4HRmDPv3XHp5A== | 2019-09-16 | Class II permissive change or modification of presently authorized equipment |
| 9d0vzAgAC7YXsyodjn8qdQ== | 2019-09-16 | Class II permissive change or modification of presently authorized equipment |
| 5koGpATEIHug7rkvKlSu3Q== | 2019-09-16 | Class II permissive change or modification of presently authorized equipment |
| 2cGa12ADAel37rypWm5+1Q== | 2019-09-16 | Class II permissive change or modification of presently authorized equipment |
| sw1QmXRvHBlYz16zJlzmlQ== | 2019-06-20 | Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017 |
| qy67kx3WpKKep2ZKo7py6Q== | 2019-06-20 | Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017 |
| St+r9uYlDxIXJKiRonHSrw== | 2019-06-20 | Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017 |
| EUZVYNi597MzSETj1dxQeg== | 2019-06-20 | Change in identification of presently authorized equipment. Original FCC ID: PD99260NG Grant Date: 07/24/2017 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 15B | CC | ||
| 2402-2480 MHz | 0.0140000 | 15C | CC |
| 2402-2480 MHz | 0.01 | 15C | CC |
| 2412-2472 MHz | 0.984 | 15C | CC, MO |
| 2422-2462 MHz | 0.43 | 15C | CC, MO |
| 5180-5240 MHz | 0.191 | 15E | CC, MO |
| 5190-5230 MHz | 0.134 | 15E | CC, MO |
| 5210 MHz | 0.062 | 15E | CC, MO |
| 5260-5320 MHz | 0.229 | 15E | CC, MO, ND |
| 5270-5310 MHz | 0.11 | 15E | CC, MO, ND |
| 5290 MHz | 0.052 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.198 | 15E | CC, MO, ND |
| 5510-5670 MHz | 0.221 | 15E | CC, MO, ND |
| 5530-5690 MHz | 0.232 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.299 | 15E | CC, MO |
| 5755-5795 MHz | 0.198 | 15E | CC, MO |
| 5775 MHz | 0.148 | 15E | CC, MO |
Grants
TCB Grant - Application z4DYEyDWj4HRmDPv3XHp5A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 09/16/2019 Application Dated: 09/12/2019 |
| MilDef Crete Inc. |
| 7F, No. 250, Sec 3, Pei Shen Rd |
| Shen Keng District,New Taipei City, Taiwan |
| Attention: Willie Liang , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IR5DT13 |
| Name of Grantee: | MilDef Crete Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless-AC-9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.984 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.43 |
| Permissive change II: This Class II Change is to a) incorporate/install the module into the dedicated host of Laptop Computer (DT13) as described in this filing. b) power decreasing via software. The highest reported SAR values for near-body, and simultaneous transmission use conditions are 0.65 W/kg, and 1.23 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application z4DYEyDWj4HRmDPv3XHp5A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MilDef Crete Inc. 7F, No. 250, Sec 3, Pei Shen Rd Shen Keng District,New Taipei City, Taiwan |
Date of Grant: 09/16/2019 Application Dated: 09/12/2019 |
| Attention: Willie Liang , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IR5DT13 |
| Name of Grantee: | MilDef Crete Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless-AC-9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.984 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.43 |
| Permissive change II: This Class II Change is to a) incorporate/install the module into the dedicated host of Laptop Computer (DT13) as described in this filing. b) power decreasing via software. The highest reported SAR values for near-body, and simultaneous transmission use conditions are 0.65 W/kg, and 1.23 W/kg, respectively. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/20/2019 Application Dated: 06/20/2019 |
| MilDef Crete Inc. |
| 7F, No. 250, Sec 3, Pei Shen Rd |
| Shen Keng District,New Taipei City, Taiwan |
| Attention: Willie Liang , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IR5DT13 |
| Name of Grantee: | MilDef Crete Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.191 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.134 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.062 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.229 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.11 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.052 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.198 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.221 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.232 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.299 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.198 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.148 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application sw1QmXRvHBlYz16zJlzmlQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MilDef Crete Inc. 7F, No. 250, Sec 3, Pei Shen Rd Shen Keng District,New Taipei City, Taiwan |
Date of Grant: 06/20/2019 Application Dated: 06/20/2019 |
| Attention: Willie Liang , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IR5DT13 |
| Name of Grantee: | MilDef Crete Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.191 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.134 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.062 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.229 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.11 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.052 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.198 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.221 | ||
| CC MO ND | 15E | 5530.0 - 5690.0 | 0.232 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.299 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.198 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.148 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. This transmitter has 20MHz, 40MHz and 80MHz bandwidth modes as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/20/2019 Application Dated: 06/20/2019 |
| MilDef Crete Inc. |
| 7F, No. 250, Sec 3, Pei Shen Rd |
| Shen Keng District,New Taipei City, Taiwan |
| Attention: Willie Liang , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IR5DT13 |
| Name of Grantee: | MilDef Crete Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application St+r9uYlDxIXJKiRonHSrw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MilDef Crete Inc. 7F, No. 250, Sec 3, Pei Shen Rd Shen Keng District,New Taipei City, Taiwan |
Date of Grant: 06/20/2019 Application Dated: 06/20/2019 |
| Attention: Willie Liang , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IR5DT13 |
| Name of Grantee: | MilDef Crete Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/20/2019 Application Dated: 06/20/2019 |
| MilDef Crete Inc. |
| 7F, No. 250, Sec 3, Pei Shen Rd |
| Shen Keng District,New Taipei City, Taiwan |
| Attention: Willie Liang , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IR5DT13 |
| Name of Grantee: | MilDef Crete Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application qy67kx3WpKKep2ZKo7py6Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MilDef Crete Inc. 7F, No. 250, Sec 3, Pei Shen Rd Shen Keng District,New Taipei City, Taiwan |
Date of Grant: 06/20/2019 Application Dated: 06/20/2019 |
| Attention: Willie Liang , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IR5DT13 |
| Name of Grantee: | MilDef Crete Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/20/2019 Application Dated: 06/20/2019 |
| MilDef Crete Inc. |
| 7F, No. 250, Sec 3, Pei Shen Rd |
| Shen Keng District,New Taipei City, Taiwan |
| Attention: Willie Liang , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IR5DT13 |
| Name of Grantee: | MilDef Crete Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.984 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.43 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application EUZVYNi597MzSETj1dxQeg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MilDef Crete Inc. 7F, No. 250, Sec 3, Pei Shen Rd Shen Keng District,New Taipei City, Taiwan |
Date of Grant: 06/20/2019 Application Dated: 06/20/2019 |
| Attention: Willie Liang , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IR5DT13 |
| Name of Grantee: | MilDef Crete Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wireless-AC 9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.984 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.43 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.40W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 09/16/2019 Application Dated: 09/12/2019 |
| MilDef Crete Inc. |
| 7F, No. 250, Sec 3, Pei Shen Rd |
| Shen Keng District,New Taipei City, Taiwan |
| Attention: Willie Liang , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IR5DT13 |
| Name of Grantee: | MilDef Crete Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wireless-AC-9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| Permissive change II: This Class II Change is to a) incorporate/install the module into the dedicated host of Laptop Computer (DT13) as described in this filing. b) power decreasing via software. The highest reported SAR values for near-body, and simultaneous transmission use conditions are 0.24 W/kg, and 1.59 W/kg, respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 9d0vzAgAC7YXsyodjn8qdQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MilDef Crete Inc. 7F, No. 250, Sec 3, Pei Shen Rd Shen Keng District,New Taipei City, Taiwan |
Date of Grant: 09/16/2019 Application Dated: 09/12/2019 |
| Attention: Willie Liang , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IR5DT13 |
| Name of Grantee: | MilDef Crete Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wireless-AC-9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.014 |
| Permissive change II: This Class II Change is to a) incorporate/install the module into the dedicated host of Laptop Computer (DT13) as described in this filing. b) power decreasing via software. The highest reported SAR values for near-body, and simultaneous transmission use conditions are 0.24 W/kg, and 1.59 W/kg, respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 09/16/2019 Application Dated: 09/12/2019 |
| MilDef Crete Inc. |
| 7F, No. 250, Sec 3, Pei Shen Rd |
| Shen Keng District,New Taipei City, Taiwan |
| Attention: Willie Liang , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IR5DT13 |
| Name of Grantee: | MilDef Crete Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless-AC-9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.191 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.134 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.062 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.299 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.198 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.148 |
| Permissive change II: This Class II Change is to a) incorporate/install the module into the dedicated host of Laptop Computer (DT13) as described in this filing. b) power decreasing via software. The highest reported SAR values for near-body, and simultaneous transmission use conditions are 0.24 W/kg, and 1.59 W/kg, respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 5koGpATEIHug7rkvKlSu3Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MilDef Crete Inc. 7F, No. 250, Sec 3, Pei Shen Rd Shen Keng District,New Taipei City, Taiwan |
Date of Grant: 09/16/2019 Application Dated: 09/12/2019 |
| Attention: Willie Liang , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IR5DT13 |
| Name of Grantee: | MilDef Crete Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wireless-AC-9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.191 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.134 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.062 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.299 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.198 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.148 |
| Permissive change II: This Class II Change is to a) incorporate/install the module into the dedicated host of Laptop Computer (DT13) as described in this filing. b) power decreasing via software. The highest reported SAR values for near-body, and simultaneous transmission use conditions are 0.24 W/kg, and 1.59 W/kg, respectively. Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.03W/kg and 1.41W/kg respectively. This module is approved in portable/mobile configurations with antenna SkyCross reference Antenna, Type PIFA at 14mm minimum test separation distance. SAR testing was performed to demonstrate RF compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 09/16/2019 Application Dated: 09/12/2019 |
| MilDef Crete Inc. |
| 7F, No. 250, Sec 3, Pei Shen Rd |
| Shen Keng District,New Taipei City, Taiwan |
| Attention: Willie Liang , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IR5DT13 |
| Name of Grantee: | MilDef Crete Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Wireless-AC-9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| Permissive change II: This Class II Change is to a) incorporate/install the module into the dedicated host of Laptop Computer (DT13) as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 2cGa12ADAel37rypWm5+1Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MilDef Crete Inc. 7F, No. 250, Sec 3, Pei Shen Rd Shen Keng District,New Taipei City, Taiwan |
Date of Grant: 09/16/2019 Application Dated: 09/12/2019 |
| Attention: Willie Liang , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IR5DT13 |
| Name of Grantee: | MilDef Crete Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Wireless-AC-9260 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| Permissive change II: This Class II Change is to a) incorporate/install the module into the dedicated host of Laptop Computer (DT13) as described in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |