FCC ID IWD-WINS-3900004

SMR800 / iDEN Pico-repeater

by Radio Frequency Systems Inc

Grantee Code: IWD   Product Code: WINS3900004
Latest application date: 2008-12-18

FCC ID Device Details

FCC IDIWD-WINS-3900004
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeIWD
Product CodeWINS3900004
Applicant BusinessRadio Frequency Systems Inc 🇺🇸
Related Domains rfsworld.com
Equipment ClassSMR800 / iDEN Pico-repeater
Test FirmCETECOM ICT Services GmbH

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
806-824 MHzOriginal Equipment2008-12-18

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2008-12-18PDF 649.9 KB
Internal PhotosInternal Photos2008-12-18PDF 382.7 KB
External PhotosExternal Photos2008-12-18PDF 282.2 KB
labelID Label/Location Info2008-12-18PDF 795.3 KB
Test Setup PhotosTest Setup Photos2008-12-18PDF 446.8 KB
Test Report including photos and formsTest Report2008-12-18PDF 1.9 MB
Confidentiality RequestCover Letter(s)2008-12-18PDF 22.8 KB
RF Exposure InfoRF Exposure Info2008-12-18PDF 111.4 KB

Application Information

Application IDYFWtUhXavWhVYybJBAstyw==
Final Action Date2008-12-18
Application PurposeOriginal Equipment
Applicant FRN0009012410
Model-WINS-3900004
Frequency Range806-824 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionSMR800 / iDEN Pico-repeater
Responsible PartyPaul Carney, Senior RF Engineer, paul.carney@rfsworld.com , 602-722-9684
Test FirmGerald Schmidt, CETECOM ICT Services GmbH, tcb@cetecom.com , 49-681-598-0
TCB Emailgerald.schmidt@ict.cetecom.de
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is peak conducted. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. Downlink (indoor) grant conditions. The antenna used for this transmitter is fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power must satisfy the MPE Categorical Exclusion Requirements of 2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3). Uplink/Downlink (outdoor) grant conditions. The antenna used for this transmitter is fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).

Applications

Application IDDatePurpose
YFWtUhXavWhVYybJBAstyw==2008-12-18Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
806-824 MHz0.036AmpDXW9
806-824 MHz0.037AmpGXW9
851-869 MHz0.039AmpDXW9
851-869 MHz0.035AmpGXW9

Grants

TCB Grant - Application YFWtUhXavWhVYybJBAstyw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany
Date of Grant: 12/18/2008

Application Dated: 12/18/2008
Radio Frequency Systems Inc
29 Research Parkway
Wallingford, CT 06492
 
Attention: Paul Carney , Senior RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  IWD-WINS-3900004
Name of Grantee:  Radio Frequency Systems Inc
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: SMR800 / iDEN Pico-repeater
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 806.0  -  824.0 0.036  Amp DXW
90 806.0  -  824.0 0.037  Amp GXW
90 851.0  -  869.0 0.039  Amp DXW
90 851.0  -  869.0 0.035  Amp GXW

Power listed is peak conducted. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

Downlink (indoor) grant conditions. The antenna used for this transmitter is fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power must satisfy the MPE Categorical Exclusion Requirements of 2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).

Uplink/Downlink (outdoor) grant conditions. The antenna used for this transmitter is fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).


EAS Grant - Application YFWtUhXavWhVYybJBAstyw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Radio Frequency Systems Inc
29 Research Parkway
Wallingford, CT 06492
United States
  Date of Grant: 12/18/2008

Application Dated: 12/18/2008
 
Attention: Paul Carney , Senior RF Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  IWD-WINS-3900004
Name of Grantee:  Radio Frequency Systems Inc
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: SMR800 / iDEN Pico-repeater
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 806.0  -  824.0 0.036  Amp DXW
90 806.0  -  824.0 0.037  Amp GXW
90 851.0  -  869.0 0.039  Amp DXW
90 851.0  -  869.0 0.035  Amp GXW

Power listed is peak conducted. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

Downlink (indoor) grant conditions. The antenna used for this transmitter is fixed-mounted on indoor permanent structures providing a separation distance of at least 20 cm from all persons during normal operation. The maximum radiated output power must satisfy the MPE Categorical Exclusion Requirements of 2.1091. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).

Uplink/Downlink (outdoor) grant conditions. The antenna used for this transmitter is fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3).



Mail To: