FCC ID J9C-DC544D3

DC544D_3 PCIe DAUGHTER CARD 2.4/5G AP APPS

by Qualcomm Technologies, Inc.

Grantee Code: J9C   Product Code: DC544D3
Latest application date: 2010-05-24
Documents for this grantee are blocked from local display. Public filing metadata and document detail pages remain available, with links to the FCC attachment forwarder and document sources.

FCC ID Device Details

FCC IDJ9C-DC544D3
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeJ9C
Product CodeDC544D3
Applicant BusinessQualcomm Technologies, Inc. 🇺🇸
Related Domains qti.qualcomm.com ccsemc.com
Equipment ClassDC544D_3 PCIe DAUGHTER CARD 2.4/5G AP APPS
Test FirmCompliance Certification Services

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2010-05-24
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2010-05-24
2412-2462 MHzOriginal Equipment2009-11-24
5180-5240 MHzOriginal Equipment2009-11-24

Exhibits

DocumentTypeAvailableFile
Manaul 1 Privacy/DMCA removedUsers Manual2010-05-23PDF 351.7 KB
Manaul 2 BlockedUsers Manual2010-05-23PDF 371.1 KB
Manaul 3 BlockedUsers Manual2010-05-23PDF 234.8 KB
Manual 1 BlockedUsers Manual2010-05-23PDF 351.7 KB
Manual 2 BlockedUsers Manual2010-05-23PDF 371.1 KB
Manual 3 BlockedUsers Manual2010-05-23PDF 234.8 KB
Internal Photos BlockedInternal Photos2010-11-16PDF 252.1 KB
Internal Photos BlockedInternal Photos2010-05-23PDF 197.1 KB
External Photos BlockedExternal Photos2010-11-16PDF 234.3 KB
External Photos BlockedExternal Photos2010-05-23PDF 334 KB
Label BlockedID Label/Location Info2009-11-24PDF 63.2 KB
Setup Photos BlockedTest Setup Photos2010-11-16PDF 270.8 KB
Setup Photos BlockedTest Setup Photos2010-11-16PDF 241.7 KB
Setup Photos BlockedTest Setup Photos2010-05-23PDF 268.9 KB
Setup Photos BlockedTest Setup Photos2010-05-23PDF 269.7 KB
Test Report BlockedTest Report2010-05-24PDF 3.2 MB
Test Report BlockedTest Report2010-05-24PDF 1.4 MB
Report BlockedTest Report2009-11-24PDF 3.2 MB
UNII Report BlockedTest Report2009-11-24PDF 1.4 MB
Authorization Letter BlockedCover Letter(s)2010-05-24PDF 20.9 KB
C2PC Letter BlockedCover Letter(s)2010-05-24PDF 204 KB
Confidentiality Letter BlockedCover Letter(s)2010-05-24PDF 72.6 KB
Confidentiality Letter BlockedCover Letter(s)2009-11-24PDF 92.3 KB
Cover Letter BlockedCover Letter(s)2009-11-24PDF 116.3 KB
Modular Approval Letter BlockedCover Letter(s)2009-11-24PDF 79 KB
non-DFS Approval Letter BlockedCover Letter(s)2009-11-24PDF 20.6 KB
UNII MPE BlockedRF Exposure Info2009-11-24PDF 122.9 KB

Application Information

Application IDvOhCVbV5L4re9AJZSTPNzg==
Final Action Date2010-05-24
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0022707111
Model-DC544D3
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionDC544D_3 PCIe DAUGHTER CARD 2.4/5G AP APPS
Responsible PartyPaul Guckian, Vice President, Regulatory Engineering, pguckian@qti.qualcomm.com , 858-651-1547
Technical ContactThu Chan, COMPLIANCE CERTIFICATION SERVICES, Thu.Chan@CCSEMC.COM , (510) 771-1000
Non-Technical ContactThu Chan, COMPLIANCE CERTIFICATION SERVICES, Thu.Chan@CCSEMC.COM , (510) 771-1000
Test FirmBarbara Judge, Compliance Certification Services, barbara.judge@ccsemc.com , 510-771-1104
TCB Emailmike.kuo@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date11/16/2010
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change. Power listed is the maximum combined conducted output power. Device is an Ethernet Adapter Card operating in a 4x4 Spatial Multiplexing MIMO and legacy modes as described in this filing. Approval is for OEM installation into Mobile RF exposure condition devices only. Installation in Portable RF exposure devices requires additional certification. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. This transmitter is restricted to indoor-only use within the 5.15-5.25 GHz band. Approval is for operation as a client only device without radar detection.

Applications

Application IDDatePurpose
vOhCVbV5L4re9AJZSTPNzg==2010-05-24Class II permissive change or modification of presently authorized equipment
bPWpIwDot0ZvhmizRuYVvQ==2010-05-24Class II permissive change or modification of presently authorized equipment
fqXhoVGQy1m8n4L3JJn5yw==2009-11-24Original Equipment
0WM9935dAP67Y9kaR/eqMw==2009-11-24Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.4168715CCC, MO
2412-2462 MHz0.412115CCC, MO
2422-2452 MHz0.4027215CCC, MO
5180-5240 MHz0.0165215ECC, MO
5180-5240 MHz0.0210415ECC, MO
5190-5230 MHz0.0464515ECC, MO
5745-5825 MHz0.3273415CCC, MO
5745-5825 MHz0.334215CCC, MO
5755-5795 MHz0.3198915CCC, MO

Grants

TCB Grant - Application vOhCVbV5L4re9AJZSTPNzg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/24/2010

Application Dated: 05/21/2010
Qualcomm Technologies, Inc.
5775 Morehouse Drive
San Diego, CA 92121
 
Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  J9C-DC544D3
Name of Grantee:  Qualcomm Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: DC544D_3 PCIe DAUGHTER CARD 2.4/5G AP APPS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.41687  
CC MO 15C 2412.0  -  2462.0 0.4121  
CC MO 15C 2422.0  -  2452.0 0.40272  
CC MO 15C 5745.0  -  5825.0 0.32734  
CC MO 15C 5745.0  -  5825.0 0.3342  
CC MO 15C 5755.0  -  5795.0 0.31989  

Class II Permissive Change. Power listed is the maximum combined conducted output power. Device is an Ethernet Adapter Card operating in a 4x4 Spatial Multiplexing MIMO and legacy modes as described in this filing. Approval is for OEM installation into Mobile RF exposure condition devices only. Installation in Portable RF exposure devices requires additional certification. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. This transmitter is restricted to indoor-only use within the 5.15-5.25 GHz band. Approval is for operation as a client only device without radar detection.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application vOhCVbV5L4re9AJZSTPNzg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Qualcomm Technologies, Inc.
5775 Morehouse Drive
San Diego, CA 92121
United States
  Date of Grant: 05/24/2010

Application Dated: 05/21/2010
 
Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  J9C-DC544D3
Name of Grantee:  Qualcomm Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: DC544D_3 PCIe DAUGHTER CARD 2.4/5G AP APPS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.41687  
CC MO 15C 2412.0  -  2462.0 0.4121  
CC MO 15C 2422.0  -  2452.0 0.40272  
CC MO 15C 5745.0  -  5825.0 0.32734  
CC MO 15C 5745.0  -  5825.0 0.3342  
CC MO 15C 5755.0  -  5795.0 0.31989  

Class II Permissive Change. Power listed is the maximum combined conducted output power. Device is an Ethernet Adapter Card operating in a 4x4 Spatial Multiplexing MIMO and legacy modes as described in this filing. Approval is for OEM installation into Mobile RF exposure condition devices only. Installation in Portable RF exposure devices requires additional certification. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. This transmitter is restricted to indoor-only use within the 5.15-5.25 GHz band. Approval is for operation as a client only device without radar detection.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application fqXhoVGQy1m8n4L3JJn5yw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 11/24/2009

Application Dated: 11/24/2009
Qualcomm Technologies, Inc.
5775 Morehouse Drive
San Diego, CA 92121
 
Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  J9C-DC544D3
Name of Grantee:  Qualcomm Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: DC544D_3 PCIe DAUGHTER CARD 2.4/5G AP APPS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.41687  
CC MO 15C 2412.0  -  2462.0 0.4121  
CC MO 15C 2422.0  -  2452.0 0.40272  
CC MO 15C 5745.0  -  5825.0 0.32734  
CC MO 15C 5745.0  -  5825.0 0.3342  
CC MO 15C 5755.0  -  5795.0 0.31989  

Power listed is the maximum combined conducted output power. Device is an Ethernet Adapter Card operating in a 4x4 Spatial Multiplexing MIMO and legacy modes as described in this filing. Approval is for OEM installation into Mobile RF exposure condition devices only. Installation in Portable RF exposure devices requires additional certification. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application fqXhoVGQy1m8n4L3JJn5yw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Qualcomm Technologies, Inc.
5775 Morehouse Drive
San Diego, CA 92121
United States
  Date of Grant: 11/24/2009

Application Dated: 11/24/2009
 
Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  J9C-DC544D3
Name of Grantee:  Qualcomm Technologies, Inc.
Equipment Class: Digital Transmission System
Notes: DC544D_3 PCIe DAUGHTER CARD 2.4/5G AP APPS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.41687  
CC MO 15C 2412.0  -  2462.0 0.4121  
CC MO 15C 2422.0  -  2452.0 0.40272  
CC MO 15C 5745.0  -  5825.0 0.32734  
CC MO 15C 5745.0  -  5825.0 0.3342  
CC MO 15C 5755.0  -  5795.0 0.31989  

Power listed is the maximum combined conducted output power. Device is an Ethernet Adapter Card operating in a 4x4 Spatial Multiplexing MIMO and legacy modes as described in this filing. Approval is for OEM installation into Mobile RF exposure condition devices only. Installation in Portable RF exposure devices requires additional certification. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application bPWpIwDot0ZvhmizRuYVvQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 05/24/2010

Application Dated: 05/21/2010
Qualcomm Technologies, Inc.
5775 Morehouse Drive
San Diego, CA 92121
 
Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  J9C-DC544D3
Name of Grantee:  Qualcomm Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: DC544D_3 PCIe DAUGHTER CARD 2.4/5G AP APPS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.01652  
CC MO 15E 5180.0  -  5240.0 0.02104  
CC MO 15E 5190.0  -  5230.0 0.04645  

Class II Permissive Change. Power listed is the maximum combined conducted output power. Device is an Ethernet Adapter Card operating in a 4x4 Spatial Multiplexing MIMO and legacy modes as described in this filing. Approval is for OEM installation into Mobile RF exposure condition devices only. Installation in Portable RF exposure devices requires additional certification. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. This transmitter is restricted to indoor-only use within the 5.15-5.25 GHz band.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application bPWpIwDot0ZvhmizRuYVvQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Qualcomm Technologies, Inc.
5775 Morehouse Drive
San Diego, CA 92121
United States
  Date of Grant: 05/24/2010

Application Dated: 05/21/2010
 
Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  J9C-DC544D3
Name of Grantee:  Qualcomm Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: DC544D_3 PCIe DAUGHTER CARD 2.4/5G AP APPS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.01652  
CC MO 15E 5180.0  -  5240.0 0.02104  
CC MO 15E 5190.0  -  5230.0 0.04645  

Class II Permissive Change. Power listed is the maximum combined conducted output power. Device is an Ethernet Adapter Card operating in a 4x4 Spatial Multiplexing MIMO and legacy modes as described in this filing. Approval is for OEM installation into Mobile RF exposure condition devices only. Installation in Portable RF exposure devices requires additional certification. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. This transmitter is restricted to indoor-only use within the 5.15-5.25 GHz band.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 0WM9935dAP67Y9kaR/eqMw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 11/24/2009

Application Dated: 11/24/2009
Qualcomm Technologies, Inc.
5775 Morehouse Drive
San Diego, CA 92121
 
Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  J9C-DC544D3
Name of Grantee:  Qualcomm Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: DC544D_3 PCIe DAUGHTER CARD 2.4/5G AP APPS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.01652  
CC MO 15E 5180.0  -  5240.0 0.02104  
CC MO 15E 5190.0  -  5230.0 0.04645  

Power listed is the maximum combined conducted output power. Device is an Ethernet Adapter Card operating in a 4x4 Spatial Multiplexing MIMO and legacy modes as described in this filing. Approval is for OEM installation into Mobile RF exposure condition devices only. Installation in Portable RF exposure devices requires additional certification. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. This transmitter is restricted to indoor-only use within the 5.15-5.25 GHz band.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 0WM9935dAP67Y9kaR/eqMw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Qualcomm Technologies, Inc.
5775 Morehouse Drive
San Diego, CA 92121
United States
  Date of Grant: 11/24/2009

Application Dated: 11/24/2009
 
Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  J9C-DC544D3
Name of Grantee:  Qualcomm Technologies, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: DC544D_3 PCIe DAUGHTER CARD 2.4/5G AP APPS
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.01652  
CC MO 15E 5180.0  -  5240.0 0.02104  
CC MO 15E 5190.0  -  5230.0 0.04645  

Power listed is the maximum combined conducted output power. Device is an Ethernet Adapter Card operating in a 4x4 Spatial Multiplexing MIMO and legacy modes as described in this filing. Approval is for OEM installation into Mobile RF exposure condition devices only. Installation in Portable RF exposure devices requires additional certification. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. This transmitter is restricted to indoor-only use within the 5.15-5.25 GHz band.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: