FCC ID J9CCASTRAWOZB

Tracking Module

by Qualcomm Technologies, Inc.

Grantee Code: J9C   Product Code: CASTRAWOZB
Latest application date: 2011-01-06
Documents for this grantee are blocked from local display. Public filing metadata and document detail pages remain available, with links to the FCC attachment forwarder and document sources.

FCC ID Device Details

FCC IDJ9CCASTRAWOZB
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeJ9C
Product CodeCASTRAWOZB
Applicant BusinessQualcomm Technologies, Inc. 🇺🇸
Related Domains qti.qualcomm.com
Equipment ClassTracking Module

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
1851.25-1908.75 MHzClass II permissive change or modification of presently authorized equipment2011-01-06
824.7-848.31 MHzOriginal Equipment2009-07-07

Exhibits

DocumentTypeAvailableFile
Users Manual BlockedUsers Manual2009-08-21PDF 647.2 KB
Internal Photos BlockedInternal Photos2009-08-21PDF 280.9 KB
External Photos BlockedExternal Photos2009-08-21PDF 202.2 KB
ID Label BlockedID Label/Location Info2009-07-07PDF 75.2 KB
Block Diagram BlockedBlock Diagram2009-07-07PDF 16.7 KB
Operational Description BlockedOperational Description2009-07-07PDF 460.9 KB
Setup Photos BlockedTest Setup Photos2009-07-07PDF 547.3 KB
FCC Certification Part 24 BlockedTest Report2011-01-06PDF 136.1 KB
Test Report 1 BlockedTest Report2009-07-07PDF 533.3 KB
Test Report 2 BlockedTest Report2009-07-07PDF 163 KB
Test Report 3 BlockedTest Report2009-07-07PDF 450.2 KB
FCC Agent Authorization BlockedCover Letter(s)2011-01-06PDF 20.5 KB
FCC Class II Permissive Change Letter BlockedCover Letter(s)2011-01-06PDF 49.1 KB
Authorization Letter BlockedCover Letter(s)2009-07-07PDF 20.9 KB
Modular Approval Letter BlockedCover Letter(s)2009-07-07PDF 26.9 KB
Request for Confidentiality BlockedCover Letter(s)2009-07-07PDF 22.9 KB
MPE Report BlockedRF Exposure Info2011-01-06PDF 136.6 KB
Antenna Specification BlockedParts List/Tune Up Info2009-07-07PDF 84.1 KB
MPE BlockedRF Exposure Info2009-07-07PDF 78.8 KB

Application Information

Application IDqVUWAqUgR2pziUO8ldio/Q==
Final Action Date2011-01-06
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0022707111
ModelCASTRAWOZB
Frequency Range1851.25-1908.75 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionTracking Module
Responsible PartyPaul Guckian, Vice President, Regulatory Engineering, pguckian@qti.qualcomm.com , 858-651-1547
TCB Emailkarens@compliancetesting.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change for use in PCS-1900 band in specific Mobile RF Exposure host with collocation as documented in the filing. Output Power listed is Conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.31W, Part 24 EIRP 0.76W. Limited modular approval for use as a module in mobile or fixed exposure conditions; antenna gain, including cable loss, must not exceed 7dBi for 850MHz/Cellular band and 4dBi for 1900MHz/PCS band, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation.

Applications

Application IDDatePurpose
qVUWAqUgR2pziUO8ldio/Q==2011-01-06Class II permissive change or modification of presently authorized equipment
X8ctCO50mpZ9yB/wBRco8w==2009-07-07Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.7-848.31 MHz0.252.5ppm1M28F9W22H
1851.25-1908.75 MHz0.29800002.5000000000ppm1M28F9W24E
1851.25-1908.75 MHz0.2982.5ppm1M28F9W24E

Grants

TCB Grant - Application X8ctCO50mpZ9yB/wBRco8w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 07/07/2009

Application Dated: 07/07/2009
Qualcomm Technologies, Inc.
5775 Morehouse Drive
San Diego, CA 92121
 
Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  J9CCASTRAWOZB
Name of Grantee:  Qualcomm Technologies, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: TRACKING MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.25 2.5  PM 1M28F9W
24E 1851.25  -  1908.75 0.298 2.5  PM 1M28F9W

Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.31W, Part 24 EIRP 0.76W. Limited modular approval for use as a module in mobile or fixed exposure conditions; antenna gain, including cable loss, must not exceed 7dBi for 850MHz/Cellular band and 4dBi for 1900MHz/PCS band, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation.

EAS Grant - Application X8ctCO50mpZ9yB/wBRco8w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Qualcomm Technologies, Inc.
5775 Morehouse Drive
San Diego, CA 92121
United States
  Date of Grant: 07/07/2009

Application Dated: 07/07/2009
 
Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  J9CCASTRAWOZB
Name of Grantee:  Qualcomm Technologies, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: TRACKING MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.7  -  848.31 0.25 2.5  PM 1M28F9W
24E 1851.25  -  1908.75 0.298 2.5  PM 1M28F9W

Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.31W, Part 24 EIRP 0.76W. Limited modular approval for use as a module in mobile or fixed exposure conditions; antenna gain, including cable loss, must not exceed 7dBi for 850MHz/Cellular band and 4dBi for 1900MHz/PCS band, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation.



TCB Grant - Application qVUWAqUgR2pziUO8ldio/Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compliance Testing, LLC
1724 S. Nevada Way
Mesa, AZ 85204
Date of Grant: 01/06/2011

Application Dated: 01/05/2011
Qualcomm Technologies, Inc.
5775 Morehouse Drive
San Diego, CA 92121
 
Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  J9CCASTRAWOZB
Name of Grantee:  Qualcomm Technologies, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Tracking Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1851.25  -  1908.75 0.298 2.5  PM 1M28F9W

Class II Permissive Change for use in PCS-1900 band in specific Mobile RF Exposure host with collocation as documented in the filing. Output Power listed is Conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.31W, Part 24 EIRP 0.76W. Limited modular approval for use as a module in mobile or fixed exposure conditions; antenna gain, including cable loss, must not exceed 7dBi for 850MHz/Cellular band and 4dBi for 1900MHz/PCS band, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation.

EAS Grant - Application qVUWAqUgR2pziUO8ldio/Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Qualcomm Technologies, Inc.
5775 Morehouse Drive
San Diego, CA 92121
United States
  Date of Grant: 01/06/2011

Application Dated: 01/05/2011
 
Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  J9CCASTRAWOZB
Name of Grantee:  Qualcomm Technologies, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Tracking Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1851.25  -  1908.75 0.298 2.5  PM 1M28F9W

Class II Permissive Change for use in PCS-1900 band in specific Mobile RF Exposure host with collocation as documented in the filing. Output Power listed is Conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.31W, Part 24 EIRP 0.76W. Limited modular approval for use as a module in mobile or fixed exposure conditions; antenna gain, including cable loss, must not exceed 7dBi for 850MHz/Cellular band and 4dBi for 1900MHz/PCS band, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee. This transmitter is approved for use in configurations specified in the application filing. Operating and installation requirements must be provided. Additional equipment authorization is required for changes that result in the need for SAR evaluation.



Mail To: