FCC ID J9CGOBI2000-D
Gobi2000 PCI Express Mini Card
by Qualcomm Technologies, Inc.
Grantee Code: J9C Product Code: GOBI2000D
Latest application date: 2009-12-08
Documents for this grantee are blocked from local display. Public filing metadata and document detail pages remain available, with links to the FCC attachment forwarder and document sources.
FCC ID Device Details
| FCC ID | J9CGOBI2000-D |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | J9C |
| Product Code | GOBI2000D |
| Applicant Business | Qualcomm Technologies, Inc. 🇺🇸 |
| Related Domains |  qti.qualcomm.com |
| Equipment Class | Gobi2000 PCI Express Mini Card |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2009-12-08 |
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2009-11-04 |
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2009-09-08 |
| 824.2-848.8 MHz | Change in identification of presently authorized equipment. Original FCC ID: J9CGOBI2000 Grant Date: 01/06/2009 | 2009-06-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Host Manual Blocked | Users Manual | 2010-06-02 | PDF 452.8 KB |
| Installation guide Blocked | Users Manual | 2010-06-02 | PDF 1.5 MB |
| OEM Instruction and co location Requirements Blocked | Users Manual | 2010-06-02 | PDF 1.3 MB |
| Manual Blocked | Users Manual | 2009-12-19 | PDF 21.4 KB |
| Users Manual Blocked | Users Manual | 2009-10-19 | PDF 533 KB |
| Internal Photos Blocked | Internal Photos | 2009-12-19 | PDF 119.6 KB |
| internal photos Blocked | Internal Photos | 2009-10-19 | PDF 119.6 KB |
| External Photos Blocked | External Photos | 2009-12-19 | PDF 83.6 KB |
| External Photos Blocked | External Photos | 2009-10-19 | PDF 83.6 KB |
| External photos Blocked | External Photos | 2009-06-24 | PDF 239.7 KB |
| Host Label format Blocked | ID Label/Location Info | 2009-12-08 | PDF 248.7 KB |
| Label Blocked | ID Label/Location Info | 2009-11-04 | PDF 40.4 KB |
| label Blocked | ID Label/Location Info | 2009-09-08 | PDF 247.3 KB |
| Label format Blocked | ID Label/Location Info | 2009-06-24 | PDF 239.7 KB |
| Part 22 24 Test Setup Photos Blocked | Test Setup Photos | 2010-06-02 | PDF 193.1 KB |
| SAR Test Setup Photos Blocked | Test Setup Photos | 2010-06-02 | PDF 694.1 KB |
| SAR Photos Blocked | Test Setup Photos | 2009-12-19 | PDF 2.9 MB |
| SAR Test Photos Blocked | Test Setup Photos | 2009-10-19 | PDF 795.3 KB |
| Part 22 24 Test Report Blocked | Test Report | 2009-12-08 | PDF 409.7 KB |
| SAR Test Report Blocked | RF Exposure Info | 2009-12-08 | PDF 691.3 KB |
| Collocated RF Analysis Blocked | Test Report | 2009-11-04 | PDF 1.5 MB |
| Agent authorization letter Blocked | Cover Letter(s) | 2009-12-08 | PDF 20.9 KB |
| Class II permissive change cover letter Blocked | Cover Letter(s) | 2009-12-08 | PDF 83.5 KB |
| Permissive change compliance history Blocked | Cover Letter(s) | 2009-12-08 | PDF 192.7 KB |
| Request for confidentiality letter Blocked | Cover Letter(s) | 2009-12-08 | PDF 78.4 KB |
| Authorization Letter Blocked | Cover Letter(s) | 2009-11-04 | PDF 20.9 KB |
| C2PC Letter Blocked | Cover Letter(s) | 2009-11-04 | PDF 65.5 KB |
| Confidentiality Letter Blocked | Cover Letter(s) | 2009-11-04 | PDF 67.4 KB |
| Auth letter Blocked | Cover Letter(s) | 2009-09-08 | PDF 20.9 KB |
| C2PC Cover Blocked | Cover Letter(s) | 2009-09-08 | PDF 65.2 KB |
| Confidentiality request Blocked | Cover Letter(s) | 2009-09-08 | PDF 67.2 KB |
| Authorization letter Blocked | Cover Letter(s) | 2009-06-24 | PDF 20.9 KB |
| Multiple listing request letter Blocked | Cover Letter(s) | 2009-06-24 | PDF 76.8 KB |
| SAR Calibration Certificates Blocked | RF Exposure Info | 2009-12-08 | PDF 1.5 MB |
| SAR Plots Blocked | RF Exposure Info | 2009-12-08 | PDF 644.4 KB |
| SAR Report Blocked | RF Exposure Info | 2009-11-04 | PDF 3.6 MB |
| SAR attachment 1 Blocked | RF Exposure Info | 2009-11-04 | PDF 1.9 MB |
| SAR attachment 2 Blocked | RF Exposure Info | 2009-11-04 | PDF 151.6 KB |
| MPE report Blocked | RF Exposure Info | 2009-09-08 | PDF 289.6 KB |
| SAR Calibrations Blocked | RF Exposure Info | 2009-09-08 | PDF 2.2 MB |
| SAR Report Blocked | RF Exposure Info | 2009-09-08 | PDF 509.9 KB |
Application Information
| Application ID | 5M7B9uG5T51ZQfo2KBP7wQ== |
|---|---|
| Final Action Date | 2009-12-08 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0022707111 |
| Model | GOBI2000-D |
| Frequency Range | 824.2-848.8 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | Gobi2000 PCI Express Mini Card |
| Responsible Party | Paul Guckian, Vice President, Regulatory Engineering, pguckian@qti.qualcomm.com , 858-651-1547 |
| TCB Email | mike.kuo@ccsemc.com  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 06/02/2010 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add two-way authentication for user installation and establish the most conservative antenna-to-user separation distance of 8.1 cm for Netbook/Notebook/Laptop PC; antenna-to-user separation distance of 2.1 cm for Tablet PC. When the module is used in the tablet platform, WWAN TX function must be disabled via firmware when the screen is rotated in secondary landscape viewing position. Output power listed is conducted; highest radiated power measured in specific configurations shown under this FCC ID number is Part 22 ERP 1.21 W, Part 24 EIRP 1.622 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Antenna gain including cable loss must not exceed values as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Installation in other portable/mobile host products is allowed in accordance with FCC notebook/module procedures. Simultaneous transmitters are allowed in portable/mobile products in accordance with FCC multi-transmitter product procedures within the limitations of the installation guidelines document in the permissive change filing.. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products may require the submission of a permissive change application, where appropriate, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each individual transmitter they choose to incorporate into a host product. The highest measured body SAR values @ 2.1 cm antenna-to-user separation distance in tablet PC are: Part 22: 0.313 W/kg; Part 24:0.6 W/kg. The highest measured body SAR value @ 8.1 cm antenna-to-user separation distance in Netbook/Notebook/Laptop PC platform are: Part 22:0.054 W/kg; Part 24:0.117 W/kg. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 5M7B9uG5T51ZQfo2KBP7wQ== | 2009-12-08 | Class II permissive change or modification of presently authorized equipment |
| x3pd3nmTUuWmasblkxWkBQ== | 2009-11-04 | Class II permissive change or modification of presently authorized equipment |
| 7klccS0QVMFW6t4FfY8eXQ== | 2009-09-08 | Class II permissive change or modification of presently authorized equipment |
| wbqP63U05Ajpe0JcdmVk6g== | 2009-06-24 | Change in identification of presently authorized equipment. Original FCC ID: J9CGOBI2000 Grant Date: 01/06/2009 |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules |
|---|---|---|---|---|
| 824.2-848.8 MHz | 1.919 | 2.5ppm | 248KGXW | 22H |
| 824.2-848.8 MHz | 0.555 | 2.5ppm | 248KG7W | 22H |
| 824.7-848.31 MHz | 0.29 | 2.5ppm | 1M28F9W | 22H |
| 826.4-846.6 MHz | 0.262 | 2.5ppm | 4M18F9W | 22H |
| 1850.2-1909.8 MHz | 0.874 | 2.5ppm | 250KGXW | 24E |
| 1850.2-1909.8 MHz | 0.396 | 2.5ppm | 245KG7W | 24E |
| 1851.25-1908.75 MHz | 0.291 | 2.5ppm | 1M28F9W | 24E |
| 1852.4-1907.5 MHz | 0.256 | 2.5ppm | 4M19F9W | 24E |
Grants
TCB Grant - Application x3pd3nmTUuWmasblkxWkBQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/04/2009 Application Dated: 11/04/2009 |
| Qualcomm Technologies, Inc. |
| 5775 Morehouse Drive |
| San Diego, CA 92121 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | J9CGOBI2000-D |
| Name of Grantee: | Qualcomm Technologies, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Gobi2000 PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.919 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.555 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.262 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.29 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.874 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.396 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.256 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.291 | 2.5 PM | 1M28F9W |
| Class II Permissive Change to allow co-located transmitters in Mobile and specific Portable RF Exposure hosts, including two-way authentication for user installation. Output power listed is conducted; highest radiated power measured in specific configurations shown in filing are Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR value is 0.117 W/kg. |
EAS Grant - Application x3pd3nmTUuWmasblkxWkBQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Technologies, Inc. 5775 Morehouse Drive San Diego, CA 92121 United States |
Date of Grant: 11/04/2009 Application Dated: 11/04/2009 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | J9CGOBI2000-D |
| Name of Grantee: | Qualcomm Technologies, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Gobi2000 PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.919 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.555 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.262 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.29 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.874 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.396 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.256 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.291 | 2.5 PM | 1M28F9W |
| Class II Permissive Change to allow co-located transmitters in Mobile and specific Portable RF Exposure hosts, including two-way authentication for user installation. Output power listed is conducted; highest radiated power measured in specific configurations shown in filing are Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR value is 0.117 W/kg. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/24/2009 Application Dated: 06/24/2009 |
| Qualcomm Technologies, Inc. |
| 5775 Morehouse Drive |
| San Diego, CA 92121 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | J9CGOBI2000-D |
| Name of Grantee: | Qualcomm Technologies, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Gobi2000 PCI Express Mini Card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.919 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.555 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.262 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.29 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.874 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.396 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.256 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.291 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application wbqP63U05Ajpe0JcdmVk6g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Technologies, Inc. 5775 Morehouse Drive San Diego, CA 92121 United States |
Date of Grant: 06/24/2009 Application Dated: 06/24/2009 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | J9CGOBI2000-D |
| Name of Grantee: | Qualcomm Technologies, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Gobi2000 PCI Express Mini Card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.919 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.555 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.262 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.29 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.874 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.396 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.256 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.291 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 09/08/2009 Application Dated: 09/04/2009 |
| Qualcomm Technologies, Inc. |
| 5775 Morehouse Drive |
| San Diego, CA 92121 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | J9CGOBI2000-D |
| Name of Grantee: | Qualcomm Technologies, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Gobi2000 PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.919 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.555 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.262 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.29 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.874 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.396 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.256 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.291 | 2.5 PM | 1M28F9W |
| Class II Permissive Change to allow co-located transmitters in Mobile and specific Portable RF Exposure hosts, including two-way authentication for user installation. Output power listed is conducted; highest radiated power measured in specific configurations shown in filing are Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR value is 0.0269 W/kg. |
EAS Grant - Application 7klccS0QVMFW6t4FfY8eXQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Technologies, Inc. 5775 Morehouse Drive San Diego, CA 92121 United States |
Date of Grant: 09/08/2009 Application Dated: 09/04/2009 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | J9CGOBI2000-D |
| Name of Grantee: | Qualcomm Technologies, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Gobi2000 PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.919 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.555 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.262 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.29 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.874 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.396 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.256 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.291 | 2.5 PM | 1M28F9W |
| Class II Permissive Change to allow co-located transmitters in Mobile and specific Portable RF Exposure hosts, including two-way authentication for user installation. Output power listed is conducted; highest radiated power measured in specific configurations shown in filing are Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR value is 0.0269 W/kg. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 12/08/2009 Application Dated: 12/08/2009 |
| Qualcomm Technologies, Inc. |
| 5775 Morehouse Drive |
| San Diego, CA 92121 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | J9CGOBI2000-D |
| Name of Grantee: | Qualcomm Technologies, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Gobi2000 PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.919 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.555 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.262 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.29 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.874 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.396 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.256 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.291 | 2.5 PM | 1M28F9W |
| Class II Permissive Change to add two-way authentication for user installation and establish the most conservative antenna-to-user separation distance of 8.1 cm for Netbook/Notebook/Laptop PC; antenna-to-user separation distance of 2.1 cm for Tablet PC. When the module is used in the tablet platform, WWAN TX function must be disabled via firmware when the screen is rotated in secondary landscape viewing position. Output power listed is conducted; highest radiated power measured in specific configurations shown under this FCC ID number is Part 22 ERP 1.21 W, Part 24 EIRP 1.622 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Antenna gain including cable loss must not exceed values as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Installation in other portable/mobile host products is allowed in accordance with FCC notebook/module procedures. Simultaneous transmitters are allowed in portable/mobile products in accordance with FCC multi-transmitter product procedures within the limitations of the installation guidelines document in the permissive change filing.. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products may require the submission of a permissive change application, where appropriate, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each individual transmitter they choose to incorporate into a host product. The highest measured body SAR values @ 2.1 cm antenna-to-user separation distance in tablet PC are: Part 22: 0.313 W/kg; Part 24:0.6 W/kg. The highest measured body SAR value @ 8.1 cm antenna-to-user separation distance in Netbook/Notebook/Laptop PC platform are: Part 22:0.054 W/kg; Part 24:0.117 W/kg. |
EAS Grant - Application 5M7B9uG5T51ZQfo2KBP7wQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Technologies, Inc. 5775 Morehouse Drive San Diego, CA 92121 United States |
Date of Grant: 12/08/2009 Application Dated: 12/08/2009 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | J9CGOBI2000-D |
| Name of Grantee: | Qualcomm Technologies, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Gobi2000 PCI Express Mini Card |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.919 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.555 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.262 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.29 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.874 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.396 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.256 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.291 | 2.5 PM | 1M28F9W |
| Class II Permissive Change to add two-way authentication for user installation and establish the most conservative antenna-to-user separation distance of 8.1 cm for Netbook/Notebook/Laptop PC; antenna-to-user separation distance of 2.1 cm for Tablet PC. When the module is used in the tablet platform, WWAN TX function must be disabled via firmware when the screen is rotated in secondary landscape viewing position. Output power listed is conducted; highest radiated power measured in specific configurations shown under this FCC ID number is Part 22 ERP 1.21 W, Part 24 EIRP 1.622 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Antenna gain including cable loss must not exceed values as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Installation in other portable/mobile host products is allowed in accordance with FCC notebook/module procedures. Simultaneous transmitters are allowed in portable/mobile products in accordance with FCC multi-transmitter product procedures within the limitations of the installation guidelines document in the permissive change filing.. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products may require the submission of a permissive change application, where appropriate, containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each individual transmitter they choose to incorporate into a host product. The highest measured body SAR values @ 2.1 cm antenna-to-user separation distance in tablet PC are: Part 22: 0.313 W/kg; Part 24:0.6 W/kg. The highest measured body SAR value @ 8.1 cm antenna-to-user separation distance in Netbook/Notebook/Laptop PC platform are: Part 22:0.054 W/kg; Part 24:0.117 W/kg. |
| Mail To: |