1. FCC ID
  2. J9C
  3. J9CGOBI2000-S

FCC ID J9CGOBI2000-S

Gobi2000 PCI Express Mini Card

by Qualcomm Technologies, Inc.

Grantee Code: J9C   Product Code: GOBI2000S
Latest application date: 2009-10-15
Documents for this grantee are blocked from local display. Public filing metadata and document detail pages remain available, with links to the FCC attachment forwarder and document sources.

FCC ID Device Details

FCC IDJ9CGOBI2000-S
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeJ9C
Product CodeGOBI2000S
Applicant BusinessQualcomm Technologies, Inc. 🇺🇸
Related Domains qti.qualcomm.com
Equipment ClassGobi2000 PCI Express Mini Card
Test FirmCompliance Certification Services

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.2-848.8 MHzChange in identification of presently authorized equipment. Original FCC ID: J9CGOBI2000 Grant Date: 01/06/20092009-10-15

Exhibits

DocumentTypeAvailableFile
External photos BlockedExternal Photos2009-10-15PDF 1.3 MB
Label format and location BlockedID Label/Location Info2009-10-15PDF 137.1 KB
Agent authorization BlockedCover Letter(s)2009-10-15PDF 20.9 KB
Multiple listing request letter BlockedCover Letter(s)2009-10-15PDF 154 KB

Application Information

Application IDKIJelldG0/TS/Yj0Zuslhg==
Final Action Date2009-10-15
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: J9CGOBI2000 Grant Date: 01/06/2009
Applicant FRN0022707111
ModelGOBI2000-S
Frequency Range824.2-848.8 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionGobi2000 PCI Express Mini Card
Responsible PartyPaul Guckian, Vice President, Regulatory Engineering, pguckian@qti.qualcomm.com , 858-651-1547
Test FirmBarbara Judge, Compliance Certification Services, barbara.judge@ccsemc.com , 510-771-1104
TCB Emailmike.kuo@ccsemc.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
KIJelldG0/TS/Yj0Zuslhg==2009-10-15Change in identification of presently authorized equipment. Original FCC ID: J9CGOBI2000 Grant Date: 01/06/2009

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.2-848.8 MHz1.9192.5ppm248KGXW22H
824.2-848.8 MHz0.5552.5ppm248KG7W22H
824.7-848.31 MHz0.292.5ppm1M28F9W22H
826.4-846.6 MHz0.2622.5ppm4M18F9W22H
1850.2-1909.8 MHz0.8742.5ppm250KGXW24E
1850.2-1909.8 MHz0.3962.5ppm245KG7W24E
1851.25-1908.75 MHz0.2912.5ppm1M28F9W24E
1852.4-1907.5 MHz0.2562.5ppm4M19F9W24E

Grants

TCB Grant - Application KIJelldG0/TS/Yj0Zuslhg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 10/15/2009

Application Dated: 10/15/2009
Qualcomm Technologies, Inc.
5775 Morehouse Drive
San Diego, CA 92121
 
Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  J9CGOBI2000-S
Name of Grantee:  Qualcomm Technologies, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Gobi2000 PCI Express Mini Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.919 2.5  PM 248KGXW
22H 824.2  -  848.8 0.555 2.5  PM 248KG7W
22H 826.4  -  846.6 0.262 2.5  PM 4M18F9W
22H 824.7  -  848.31 0.29 2.5  PM 1M28F9W
24E 1850.2  -  1909.8 0.874 2.5  PM 250KGXW
24E 1850.2  -  1909.8 0.396 2.5  PM 245KG7W
24E 1852.4  -  1907.5 0.256 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.291 2.5  PM 1M28F9W

Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application KIJelldG0/TS/Yj0Zuslhg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Qualcomm Technologies, Inc.
5775 Morehouse Drive
San Diego, CA 92121
United States 		  Date of Grant: 10/15/2009

Application Dated: 10/15/2009
 
Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  J9CGOBI2000-S
Name of Grantee:  Qualcomm Technologies, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Gobi2000 PCI Express Mini Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.919 2.5  PM 248KGXW
22H 824.2  -  848.8 0.555 2.5  PM 248KG7W
22H 826.4  -  846.6 0.262 2.5  PM 4M18F9W
22H 824.7  -  848.31 0.29 2.5  PM 1M28F9W
24E 1850.2  -  1909.8 0.874 2.5  PM 250KGXW
24E 1850.2  -  1909.8 0.396 2.5  PM 245KG7W
24E 1852.4  -  1907.5 0.256 2.5  PM 4M19F9W
24E 1851.25  -  1908.75 0.291 2.5  PM 1M28F9W

Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 1.21 W, Part 24 EIRP 1.18 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: