1. FCC ID
  2. J9C
  3. J9CIEMHSDPA

FCC ID J9CIEMHSDPA

IEM6270 Part 22/24 GSM/GPRS/EDGE/UMTS/HSDPA Module

by Qualcomm Technologies, Inc.

Grantee Code: J9C   Product Code: IEMHSDPA
Latest application date: 2011-08-12
Documents for this grantee are blocked from local display. Public filing metadata and document detail pages remain available, with links to the FCC attachment forwarder and document sources.

FCC ID Device Details

FCC IDJ9CIEMHSDPA
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeJ9C
Product CodeIEMHSDPA
Applicant BusinessQualcomm Technologies, Inc. 🇺🇸
Related Domains qti.qualcomm.com
Equipment ClassIEM6270 Part 22/24 GSM/GPRS/EDGE/UMTS/HSDPA Module
Test FirmCompliance Certification Services

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.2-848.8 MHzOriginal Equipment2011-08-12

Exhibits

DocumentTypeAvailableFile
Regulatory Manual BlockedUsers Manual2011-08-12PDF 128.3 KB
Internal Photos BlockedInternal Photos2011-08-12PDF 160.8 KB
External Photos BlockedExternal Photos2011-08-12PDF 107.8 KB
Label & Location BlockedID Label/Location Info2011-08-12PDF 78.5 KB
Test Setup photos BlockedTest Setup Photos2011-08-12PDF 1.5 MB
Antenna Info BlockedTest Report2011-08-12PDF 194.2 KB
Test Report Pt 22 BlockedTest Report2011-08-12PDF 4.2 MB
Test Report Pt 24 BlockedTest Report2011-08-12PDF 4 MB
Authorization 1 BlockedCover Letter(s)2011-08-12PDF 19.2 KB
Authorization 2 BlockedCover Letter(s)2011-08-12PDF 20.9 KB
Confidentiality BlockedCover Letter(s)2011-08-12PDF 25.7 KB
Cover Letter BlockedCover Letter(s)2011-08-12PDF 22.7 KB
Modular Cover BlockedCover Letter(s)2011-08-12PDF 16.8 KB
MPE Report BlockedRF Exposure Info2011-08-12PDF 156.9 KB

Application Information

Application ID6EexEoqIZ10kmCQI9ONFuQ==
Final Action Date2011-08-12
Application PurposeOriginal Equipment
Applicant FRN0022707111
ModelIEMHSDPA
Frequency Range824.2-848.8 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionIEM6270 Part 22/24 GSM/GPRS/EDGE/UMTS/HSDPA Module
Responsible PartyPaul Guckian, Vice President, Regulatory Engineering, pguckian@qti.qualcomm.com , 858-651-1547
Test FirmThu Chan, Compliance Certification Services, thu.chan@ccsemc.com , 510-771-1122
TCB Emailcertnotice@ccsemc.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is peak conducted. Modular Approval for use as a module in only mobile or fixed exposure conditions and restricted to OEM Installations. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category devices requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains modes not operational in U.S. Territories.

Applications

Application IDDatePurpose
6EexEoqIZ10kmCQI9ONFuQ==2011-08-12Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.2-848.8 MHz2.5942.5ppm251KGXW22H
824.2-848.8 MHz1.1172.5ppm247KG7W22H
826.4-846.6 MHz1.0592.5ppm4M19F9W22H
1850.2-1909.8 MHz1.1592.5ppm249KGXW24E
1850.2-1909.8 MHz1.0282.5ppm247KG7W24E
1852.4-1907.6 MHz1.1352.5ppm4M19F9W24E

Grants

TCB Grant - Application 6EexEoqIZ10kmCQI9ONFuQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 08/12/2011

Application Dated: 08/12/2011
Qualcomm Technologies, Inc.
5775 Morehouse Drive
San Diego, CA 92121
 
Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  J9CIEMHSDPA
Name of Grantee:  Qualcomm Technologies, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: IEM6270 Part 22/24 GSM/GPRS/EDGE/UMTS/HSDPA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 2.594 2.5  PM 251KGXW
22H 824.2  -  848.8 1.117 2.5  PM 247KG7W
22H 826.4  -  846.6 1.059 2.5  PM 4M19F9W
24E 1850.2  -  1909.8 1.159 2.5  PM 249KGXW
24E 1850.2  -  1909.8 1.028 2.5  PM 247KG7W
24E 1852.4  -  1907.6 1.135 2.5  PM 4M19F9W

Output power listed is peak conducted. Modular Approval for use as a module in only mobile or fixed exposure conditions and restricted to OEM Installations. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category devices requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains modes not operational in U.S. Territories.

EAS Grant - Application 6EexEoqIZ10kmCQI9ONFuQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Qualcomm Technologies, Inc.
5775 Morehouse Drive
San Diego, CA 92121
United States 		  Date of Grant: 08/12/2011

Application Dated: 08/12/2011
 
Attention: Paul Guckian , Vice President, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  J9CIEMHSDPA
Name of Grantee:  Qualcomm Technologies, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: IEM6270 Part 22/24 GSM/GPRS/EDGE/UMTS/HSDPA Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 2.594 2.5  PM 251KGXW
22H 824.2  -  848.8 1.117 2.5  PM 247KG7W
22H 826.4  -  846.6 1.059 2.5  PM 4M19F9W
24E 1850.2  -  1909.8 1.159 2.5  PM 249KGXW
24E 1850.2  -  1909.8 1.028 2.5  PM 247KG7W
24E 1852.4  -  1907.6 1.135 2.5  PM 4M19F9W

Output power listed is peak conducted. Modular Approval for use as a module in only mobile or fixed exposure conditions and restricted to OEM Installations. Antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category devices requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains modes not operational in U.S. Territories.



Mail To: