FCC ID J9CUNDP-1
UNDP-1 PCI Express Mini Card
by Qualcomm Technologies, Inc.
Grantee Code: J9C Product Code: UNDP1
Latest application date: 2009-06-26
FCC ID Device Details
| FCC ID | J9CUNDP-1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | J9C |
| Product Code | UNDP1 |
| Applicant Business | Qualcomm Technologies, Inc. 🇺🇸 |
| Related Domains |  qti.qualcomm.com |
| Equipment Class | UNDP-1 PCI Express Mini Card |
| Test Firm | SIEMIC, Inc. dba SIEMIC Laboratories |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 824.2-848.8 MHz | Class II permissive change or modification of presently authorized equipment | 2009-06-26 |
| 824.2-848.8 MHz | Original Equipment | 2008-01-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual Blocked | Users Manual | 2008-03-03 | PDF 223.6 KB |
| updated user guide Blocked | Users Manual | 2008-03-03 | PDF 674.6 KB |
| Internal Photos Blocked | Internal Photos | 2008-03-03 | PDF 185.1 KB |
| External Photos Blocked | External Photos | 2008-03-03 | PDF 153 KB |
| FCC ID location Blocked | External Photos | 2008-03-03 | PDF 45.4 KB |
| FCC ID info Blocked | ID Label/Location Info | 2008-01-18 | PDF 30.3 KB |
| Conducted Test Report Blocked | Test Report | 2008-03-03 | PDF 967.3 KB |
| Radiated Test Report Blocked | Test Report | 2008-03-03 | PDF 660.6 KB |
| FCC Auth Letter Blocked | Cover Letter(s) | 2009-06-26 | PDF 18.3 KB |
| PCII Cover Letter Blocked | Cover Letter(s) | 2009-06-26 | PDF 19.3 KB |
| Cover Letter Blocked | Cover Letter(s) | 2008-03-03 | PDF 14.5 KB |
| Response letter to 34608 Blocked | Cover Letter(s) | 2008-03-03 | PDF 134.5 KB |
| response letter Blocked | Cover Letter(s) | 2008-03-03 | PDF 222.7 KB |
| Confidentiality Request Blocked | Cover Letter(s) | 2008-01-18 | PDF 14.1 KB |
| Confidentiality request letter updated3 Blocked | Cover Letter(s) | 2008-01-18 | PDF 13.9 KB |
| response letter3 Blocked | Cover Letter(s) | 2008-01-18 | PDF 74.4 KB |
| updated confidentiality request Blocked | Cover Letter(s) | 2008-01-18 | PDF 14.2 KB |
| updated confidentiality request letter Blocked | Cover Letter(s) | 2008-01-18 | PDF 13.9 KB |
| MPE Analysis Report Blocked | RF Exposure Info | 2008-03-03 | PDF 79.3 KB |
| updated MPE report Blocked | RF Exposure Info | 2008-03-03 | PDF 79.4 KB |
Application Information
| Application ID | c+HYvA/cMyLdqo+0WXyeXA== |
|---|---|
| Final Action Date | 2009-06-26 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0022707111 |
| Model | UNDP-1 |
| Frequency Range | 824.2-848.8 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | UNDP-1 PCI Express Mini Card |
| Responsible Party | Paul Guckian, Vice President, Regulatory Engineering, pguckian@qti.qualcomm.com , 858-651-1547 |
| Test Firm | Leslie Bai, SIEMIC, Inc. dba SIEMIC Laboratories, leslie.bai@siemic.com  , 408-526-1188 |
| TCB Email | tcb@siemic.com |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive for co-locating with other transmitters (WLAN) in specific Mobile RF Exposure hosts as documented in this filing. Output power listed is conducted; highest radiated power measured in specific configurations shown in the original filing is Part 22 ERP 2.26 W, Part 24 EIRP 1.70 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters other then what is documented in this permissive change filing. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| c+HYvA/cMyLdqo+0WXyeXA== | 2009-06-26 | Class II permissive change or modification of presently authorized equipment |
| MydazfP2c9EQg5eW7JzGng== | 2008-01-18 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules |
|---|---|---|---|---|
| 824.2-848.8 MHz | 1.986 | 2.5ppm | 248KGXW | 22H |
| 824.2-848.8 MHz | 0.607 | 2.5ppm | 248KG7W | 22H |
| 824.7-848.31 MHz | 0.31 | 2.5ppm | 1M28F9W | 22H |
| 826.4-846.6 MHz | 0.277 | 2.5ppm | 4M18F9W | 22H |
| 1850.2-1909.8 MHz | 0.885 | 2.5ppm | 250KGXW | 24E |
| 1850.2-1909.8 MHz | 0.48 | 2.5ppm | 245KG7W | 24E |
| 1851.25-1908.75 MHz | 0.289 | 2.5ppm | 1M28F9W | 24E |
| 1852.4-1907.5 MHz | 0.286 | 2.5ppm | 4M19F9W | 24E |
Grants
TCB Grant - Application MydazfP2c9EQg5eW7JzGng==
EAS Grant - Application MydazfP2c9EQg5eW7JzGng==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Technologies, Inc. 5775 Morehouse Drive San Diego, CA 92121 United States |
Date of Grant: 01/18/2008 Application Dated: 11/07/2007 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | J9CUNDP-1 |
| Name of Grantee: | Qualcomm Technologies, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UNDP-1 PCI Express Mini Card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.986 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.607 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.277 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.31 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.885 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.48 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.286 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.289 | 2.5 PM | 1M28F9W |
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 2.26 W, Part 24 EIRP 1.70 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 06/26/2009 Application Dated: 06/19/2009 |
| Qualcomm Technologies, Inc. |
| 5775 Morehouse Drive |
| San Diego, CA 92121 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | J9CUNDP-1 |
| Name of Grantee: | Qualcomm Technologies, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UNDP-1 PCI Express Mini Card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.986 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.607 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.277 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.31 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.885 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.48 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.286 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.289 | 2.5 PM | 1M28F9W |
| Class II permissive for co-locating with other transmitters (WLAN) in specific Mobile RF Exposure hosts as documented in this filing. Output power listed is conducted; highest radiated power measured in specific configurations shown in the original filing is Part 22 ERP 2.26 W, Part 24 EIRP 1.70 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters other then what is documented in this permissive change filing. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application c+HYvA/cMyLdqo+0WXyeXA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Qualcomm Technologies, Inc. 5775 Morehouse Drive San Diego, CA 92121 United States |
Date of Grant: 06/26/2009 Application Dated: 06/19/2009 |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | J9CUNDP-1 |
| Name of Grantee: | Qualcomm Technologies, Inc. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | UNDP-1 PCI Express Mini Card |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.986 | 2.5 PM | 248KGXW | |
| 22H | 824.2 - 848.8 | 0.607 | 2.5 PM | 248KG7W | |
| 22H | 826.4 - 846.6 | 0.277 | 2.5 PM | 4M18F9W | |
| 22H | 824.7 - 848.31 | 0.31 | 2.5 PM | 1M28F9W | |
| 24E | 1850.2 - 1909.8 | 0.885 | 2.5 PM | 250KGXW | |
| 24E | 1850.2 - 1909.8 | 0.48 | 2.5 PM | 245KG7W | |
| 24E | 1852.4 - 1907.5 | 0.286 | 2.5 PM | 4M19F9W | |
| 24E | 1851.25 - 1908.75 | 0.289 | 2.5 PM | 1M28F9W |
| Class II permissive for co-locating with other transmitters (WLAN) in specific Mobile RF Exposure hosts as documented in this filing. Output power listed is conducted; highest radiated power measured in specific configurations shown in the original filing is Part 22 ERP 2.26 W, Part 24 EIRP 1.70 W. This device contains 900/1800 MHz and UTRA FDD I modes not operational in U.S. Territories. Limited modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed as documented in filing, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters other then what is documented in this permissive change filing. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |