- FCC ID1
- J9C2
- J9CWMD1X3
FCC ID J9CWMD1X
Tracking Module
Grantee Code: J9C Product Code: WMD1X
Latest application date: 2010-04-21
Documents for this grantee are blocked from local display. Public filing metadata and document detail pages remain available, with links to the FCC attachment forwarder and document sources.
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|
| 824.7-848.31 MHz | Original Equipment | 2010-04-21 |
Applications
| Application ID | Date | Purpose |
|---|
| +0xQuUCka5yxNPK/l+HIgg== | 2010-04-21 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules |
|---|
| 824.7-848.31 MHz | 0.288 | 2.5ppm | 1M28F9W | 22H |
| 1851.25-1908.75 MHz | 0.269 | 2.5ppm | 1M28F9W | 24E |
Grants
TCB Grant - Application +0xQuUCka5yxNPK/l+HIgg==
| TCB |
GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
|
Date of Grant: 04/21/2010
Application Dated: 04/21/2010
|
| Qualcomm Technologies, Inc. |
| 5775 Morehouse Drive |
San Diego, CA 92121
|
| |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
J9CWMD1X |
|
|
| Name of Grantee: |
Qualcomm Technologies, Inc. |
|
|
| Equipment Class: |
PCS Licensed Transmitter |
| Notes: |
Tracking Module |
| Modular Type: |
Single Modular |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
|
22H |
824.7
-
848.31
|
0.288
|
2.5
PM
|
1M28F9W
|
|
24E |
1851.25
-
1908.75
|
0.269
|
2.5
PM
|
1M28F9W
|
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.39 W, Part 24 EIRP 1.06 W. Modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed 7 dBi in cellular band and 4 dBi in PCS band, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application +0xQuUCka5yxNPK/l+HIgg==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
Qualcomm Technologies, Inc.
5775 Morehouse Drive
San Diego, CA 92121
United States
|
|
Date of Grant: 04/21/2010
Application Dated: 04/21/2010
|
| |
| Attention: Paul Guckian , Vice President, Regulatory Engineering |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
J9CWMD1X |
|
|
| Name of Grantee: |
Qualcomm Technologies, Inc. |
|
|
| Equipment Class: |
PCS Licensed Transmitter |
| Notes: |
Tracking Module |
| Modular Type: |
Single Modular |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
|
22H |
824.7
-
848.31
|
0.288
|
2.5
PM
|
1M28F9W
|
|
24E |
1851.25
-
1908.75
|
0.269
|
2.5
PM
|
1M28F9W
|
| Output power listed is conducted; highest radiated power measured in specific configurations shown in filing is Part 22 ERP 0.39 W, Part 24 EIRP 1.06 W. Modular approval for use as a module in only mobile or fixed exposure conditions; antenna gain including cable loss must not exceed 7 dBi in cellular band and 4 dBi in PCS band, for purposes of 2.1043 and 2.1091; the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons, and must not be co-located or operating in conjunction with other antennas or transmitters. Compliance of this device in all final product configurations is the responsibility of the Grantee; installation of this device into specific final products requires the submission of a Class II permissive change application where appropriate containing data demonstrating compliance for SAR, spurious emissions, ERP/EIRP, and host / module authentication, or new application if appropriate. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |