FCC ID JQ6-SIGNO20KV2

RFID Reader

by HID Global Corporation

Grantee Code: JQ6   Product Code: SIGNO20KV2
Latest application date: 2025-07-03

FCC ID Device Details

FCC IDJQ6-SIGNO20KV2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeJQ6
Product CodeSIGNO20KV2
Applicant BusinessHID Global Corporation 🇺🇸
Related Domains hidglobal.com
Equipment ClassRFID Reader
Test FirmUL LLC

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2025-07-03
13.56 MHzOriginal Equipment2025-07-03
0.125 MHzOriginal Equipment2025-07-03

Exhibits

DocumentTypeAvailableFile
plt-03703-b.1-hid-signo-reader-install-guide-en-printUsers Manual2025-12-12PDF 746.3 KB
Internal photosInternal Photos2025-12-12PDF 1.9 MB
External photosExternal Photos2025-12-12PDF 574.4 KB
ART-03236_B.1_READER_PRODUCT_LABEL_20KV2ID Label/Location Info2025-07-03PDF 75 KB
Label locationID Label/Location Info2025-07-03PDF 21.9 KB
R15701621-EP1b FCC IC LP0002 NFC BLE SETUP PHOTOS EXHBITTest Setup Photos2025-12-12PDF 1.2 MB
R15701621-EP2b v2 FCC IC 13.56 MHz and 125kHz RFID RF EXPOSURE SETUP PHOTOS EXHITest Setup Photos2025-12-12PDF 1.5 MB
20KV2 Antenna SpecTest Setup Photos2025-07-03PDF 232.3 KB
15783327-O2V1_HID_Signo Decor_20KV2_Passive Antenna Test_ReportTest Report2025-07-03PDF 1.4 MB
R15701621-E1b v2 FCC IC BLE REPORTTest Report2025-07-03PDF 3.1 MB
R15701621-E2b v2 FCC IC NFC REPORTTest Report2025-07-03PDF 1 MB
R15701621-E4b v2 FCC IC NFC 125kHz REPORTTest Report2025-07-03PDF 983.9 KB
FCC 2.911[d][5] Attestation_20KV2Attestation Statements2025-07-03PDF 121.5 KB
FCC Agent for service Attestation_20KV2Attestation Statements2025-07-03PDF 122.9 KB
FCC Agent Auth Letter [UL LLC]_HID_SIGNEDCover Letter(s)2025-07-03PDF 124.9 KB
FCC Request for Confidentiality Letter_20KV2Cover Letter(s)2025-07-03PDF 130.2 KB
R15701621-E20b v2 FCC IC 125kHz RF EXPOSURE REPORTRF Exposure Info2025-07-03PDF 439.6 KB
R15701621-E3b v2 FCC IC MPE REPORTRF Exposure Info2025-07-03PDF 422.2 KB
R15701621-E5b v3 FCC IC 13.56MHz RF EXPOSURE REPORTRF Exposure Info2025-07-03PDF 596.2 KB
Block diagram updated Metadata onlyBlock DiagramPDF 106.3 KB
FBD-05265 REV B Signo20K Capacitive Keypad FAB DRAWING Metadata onlySchematicsPDF 114.4 KB
FBD-07987 RevA FAB DWG Signo 20 V2.1 Metadata onlySchematicsPDF 320.1 KB
SCH-00291 RevB.1 Schematic SIGNO 20K Capacitive Keypad Metadata onlySchematicsPDF 277.2 KB
SCH-00533 RevA.2 Schematic Signo 20 [20K] V2.1 Metadata onlySchematicsPDF 1.8 MB
Signo 20KV2 Operational Description or Theory of Operation_updated Metadata onlyOperational DescriptionPDF 449.6 KB

Application Information

Application IDXJwUaLqU2Ovfb839A5XAXA==
Final Action Date2025-07-03
Application PurposeOriginal Equipment
Applicant FRN0005004122
ModelSIGNO20KV2
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionRFID Reader
Responsible PartySteven Peterson, Manager Product Regulatory and Compliance, rcresswell@hidglobal.com , 952-258-3411
Technical ContactLariah Sanders, UL LLC, lariah.sanders@ul.com , 9195490945
Test FirmSteven Thompson, UL LLC, steven.d.thompson@ul.com , 919 549 1430
TCB EmailLST.FRE.CertNotice@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date12/12/2025
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Peak Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions.

Applications

Application IDDatePurpose
XJwUaLqU2Ovfb839A5XAXA==2025-07-03Original Equipment
Vqgkn4S1/BgTyMz8yVC8NA==2025-07-03Original Equipment
Upb4kiFw/km1MgehpSj3Pg==2025-07-03Original Equipment

Equipment Authorization

FrequencyOutputGrant Notes
0.125 MHzCC
13.56 MHzCC
2402-2480 MHz0.0009000CC

Grants

TCB Grant - Application XJwUaLqU2Ovfb839A5XAXA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 07/03/2025

Application Dated: 07/03/2025
HID Global Corporation
611 Center Ridge Dr.
Austin, TX 78753
 
Attention: Steven Peterson , Manager Product Regulatory and Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JQ6-SIGNO20KV2
Name of Grantee:  HID Global Corporation
Equipment Class: Digital Transmission System
Notes: RFID Reader
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0009  

Power Output listed is Peak Conducted.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Vqgkn4S1/BgTyMz8yVC8NA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 07/03/2025

Application Dated: 07/03/2025
HID Global Corporation
611 Center Ridge Dr.
Austin, TX 78753
 
Attention: Steven Peterson , Manager Product Regulatory and Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JQ6-SIGNO20KV2
Name of Grantee:  HID Global Corporation
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: RFID Reader
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 13.56  -  13.56  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Upb4kiFw/km1MgehpSj3Pg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 07/03/2025

Application Dated: 07/03/2025
HID Global Corporation
611 Center Ridge Dr.
Austin, TX 78753
 
Attention: Steven Peterson , Manager Product Regulatory and Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JQ6-SIGNO20KV2
Name of Grantee:  HID Global Corporation
Equipment Class: Part 15 Low Power Transmitter Below 1705 kHz
Notes: RFID Reader
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 0.125  -  0.125  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions.

CC: This device is certified pursuant to two different Part 15 rules sections.