FCC ID JQ6-SIGNO40V2

RFID Reader

by HID Global Corporation

Grantee Code: JQ6   Product Code: SIGNO40V2
Latest application date: 2025-07-08

FCC ID Device Details

FCC IDJQ6-SIGNO40V2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeJQ6
Product CodeSIGNO40V2
Applicant BusinessHID Global Corporation 🇺🇸
Related Domains hidglobal.com
Equipment ClassRFID Reader
Test FirmUL LLC

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
0.125 MHzOriginal Equipment2025-07-08
13.56 MHzOriginal Equipment2025-07-08
2402-2480 MHzOriginal Equipment2025-07-08

Exhibits

DocumentTypeAvailableFile
plt-03703-b.1-hid-signo-reader-install-guide-en-printUsers Manual2025-12-08PDF 746.3 KB
Internal photosInternal Photos2025-12-08PDF 770 KB
External photosExternal Photos2025-12-08PDF 1,024 KB
ART-03236_B.1_READER_PRODUCT_LABEL_40V2ID Label/Location Info2025-07-08PDF 75.4 KB
Label locationID Label/Location Info2025-07-08PDF 21.7 KB
R15701621-EP1c FCC IC BLE SETUP PHOTOS EXHBITTest Setup Photos2025-12-08PDF 870.6 KB
R15701621-EP3c 13.56 MHz SETUP PHOTOS EXHBITTest Setup Photos2025-12-08PDF 987.3 KB
R15701621-EP4d NFC RF EXPOSURE SETUP PHOTOS EXHIBITTest Setup Photos2025-12-08PDF 706.3 KB
R15701621-EP5d RFID RF EXPOSURE SETUP PHOTOS EXHIBITTest Setup Photos2025-12-08PDF 889.5 KB
R15701621-EP6c 125 kHz SETUP PHOTOS EXHBITTest Setup Photos2025-12-08PDF 861.9 KB
15783327-O3V1_HID_Signo Decor_40V2_Passive Antenna Test_ReportTest Report2025-07-08PDF 1.4 MB
40V2 Antenna SpecTest Report2025-07-08PDF 221.2 KB
R15701621-E3c v2 FCC BLE ReportTest Report2025-07-08PDF 3 MB
R15701621-E7c v2 FCC IC 13.56 MHz REPORTTest Report2025-07-08PDF 1.4 MB
R15701621-E9c v2 FCC IC 125kHz RFID REPORTTest Report2025-07-08PDF 1.1 MB
FCC 2.911[d][5] Attestation_40V2Attestation Statements2025-07-08PDF 121.5 KB
FCC Agent for service Attestation_40V2Attestation Statements2025-07-08PDF 122.5 KB
FCC Agent Auth Letter [UL LLC]_HID_SIGNEDCover Letter(s)2025-07-08PDF 124.9 KB
FCC Request for Confidentiality Letter_40V2Cover Letter(s)2025-07-08PDF 129.5 KB
R15701621-E13c v2 FCC IC 13.56 MHz RF EXPOSURE REPORTRF Exposure Info2025-07-08PDF 582.9 KB
R15701621-E14c v2 FCC 125kHz RF EXPOSURE REPORTRF Exposure Info2025-07-08PDF 440.1 KB
R15701621-E15c FCC IC SIMULTANEOUS MPE REPORTRF Exposure Info2025-07-08PDF 418 KB
Block diagram updated Metadata onlyBlock DiagramPDF 106.3 KB
FBD-08196 RevA FAB DWG Signo 40 [40K 40T] V2.1 Metadata onlySchematicsPDF 425.9 KB
SCH-00546 RevA.2 Schematic Signo 40 [40K 40T] V2.1 Metadata onlySchematicsPDF 1.9 MB
Signo 40V2 Operational Description or Theory of Operation_updated Metadata onlyOperational DescriptionPDF 605.4 KB

Application Information

Application IDydqBF7TTAvc1vAoR4vzC5A==
Final Action Date2025-07-08
Application PurposeOriginal Equipment
Applicant FRN0005004122
ModelSIGNO40V2
Frequency Range0.125 MHz
Equipment ClassDCD - Part 15 Low Power Transmitter Below 1705 kHz
Device DescriptionRFID Reader
Responsible PartySteven Peterson, Manager Product Regulatory and Compliance, rcresswell@hidglobal.com , 952-258-3411
Technical ContactLariah Sanders, UL LLC, lariah.sanders@ul.com , 9195490945
Test FirmSteven Thompson, UL LLC, steven.d.thompson@ul.com , 919 549 1430
TCB EmailLST.FRE.CertNotice@ul.com
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityYes
Short-Term Confidentiality Date12/08/2025
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThe antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions.

Applications

Application IDDatePurpose
ydqBF7TTAvc1vAoR4vzC5A==2025-07-08Original Equipment
ojZdgaLG3ytkrIpXxdiFiQ==2025-07-08Original Equipment
X1IiLegpytOpJwa5MKrVLg==2025-07-08Original Equipment

Equipment Authorization

FrequencyOutputGrant Notes
0.125 MHzCC
13.56 MHzCC
2402-2480 MHz0.0011400CC

Grants

TCB Grant - Application ydqBF7TTAvc1vAoR4vzC5A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 07/08/2025

Application Dated: 07/08/2025
HID Global Corporation
611 Center Ridge Dr.
Austin, TX 78753
 
Attention: Steven Peterson , Manager Product Regulatory and Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JQ6-SIGNO40V2
Name of Grantee:  HID Global Corporation
Equipment Class: Part 15 Low Power Transmitter Below 1705 kHz
Notes: RFID Reader
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 0.125  -  0.125  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application X1IiLegpytOpJwa5MKrVLg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 07/08/2025

Application Dated: 07/08/2025
HID Global Corporation
611 Center Ridge Dr.
Austin, TX 78753
 
Attention: Steven Peterson , Manager Product Regulatory and Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JQ6-SIGNO40V2
Name of Grantee:  HID Global Corporation
Equipment Class: Digital Transmission System
Notes: RFID Reader
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00114  

Power Output listed is Peak Conducted.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application ojZdgaLG3ytkrIpXxdiFiQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 07/08/2025

Application Dated: 07/08/2025
HID Global Corporation
611 Center Ridge Dr.
Austin, TX 78753
 
Attention: Steven Peterson , Manager Product Regulatory and Compliance

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JQ6-SIGNO40V2
Name of Grantee:  HID Global Corporation
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: RFID Reader
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 13.56  -  13.56  

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions.

CC: This device is certified pursuant to two different Part 15 rules sections.