FCC ID JQU801531
RFM-S Transmitter
by KAPSCH TRAFFICCOM CANADA INC.
Grantee Code: JQU Product Code: 801531
Latest application date: 2008-09-12
FCC ID Device Details
| FCC ID | JQU801531 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | JQU |
| Product Code | 801531 |
| Applicant Business | KAPSCH TRAFFICCOM CANADA INC. 🇨🇦 |
| Related Domains |  kapsch.net  ivhs.com |
| Equipment Class | RFM-S Transmitter |
| Test Firm | Nemko Canada Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 915.75 MHz | Class II permissive change or modification of presently authorized equipment | 2008-09-12 |
| 915.75 MHz | Original Equipment | 2005-11-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Field Testing Guide | Users Manual | 2005-11-24 | PDF 29.7 KB |
| Internal photos | Internal Photos | 2005-11-24 | PDF 946 KB |
| External photos | External Photos | 2005-11-24 | PDF 352.6 KB |
| Label format | ID Label/Location Info | 2005-11-24 | PDF 67.8 KB |
| Label location | ID Label/Location Info | 2005-11-24 | PDF 79.7 KB |
| Test report | Test Report | 2005-11-24 | PDF 198.8 KB |
| Authority to act as agent | Attestation Statements | 2005-11-24 | PDF 55.6 KB |
| changes letter | Cover Letter(s) | 2008-09-12 | PDF 31.9 KB |
| Confidentiality request | Cover Letter(s) | 2005-11-24 | PDF 214.4 KB |
| MPE Calculation | RF Exposure Info | 2005-11-24 | PDF 71.1 KB |
| Safety Technical note | RF Exposure Info | 2005-11-24 | PDF 33.7 KB |
| Block diagram Metadata only | Block Diagram | PDF 33.7 KB | |
| Schematics Metadata only | Schematics | PDF 362.7 KB | |
| Operational description Metadata only | Operational Description | PDF 34.5 KB | |
| Parts list Metadata only | Parts List/Tune Up Info | PDF 883.2 KB | |
| Tune up procedure and DC voltages and current Metadata only | Parts List/Tune Up Info | PDF 21 KB |
Application Information
| Application ID | P/kggZUcbkzrnlNYM5qITg== |
|---|---|
| Final Action Date | 2008-09-12 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0021821640 |
| Model | 801531 |
| Frequency Range | 915.75 MHz |
| Equipment Class | LMS - Part 90 Location & Monitoring Transmitter |
| Device Description | RFM-S Transmitter |
| Responsible Party | RICHARD TURNOCK, CTO, RICHARD.TURNOCK@KAPSCH.NET , 905-624-3020 |
| Technical Contact | Japjeev Kohli, Mark IV Industries Corp, jkohli@ivhs.com , 905-624-3020 |
| Non-Technical Contact | Grace Siu, Mark IV Industries Corp, gsiui@ivhs.com , 905-624-3020 |
| Test Firm | Stuart Beck, Nemko Canada Inc., stuart.beck@nemko.com  , 613-737-9680 |
| TCB Email | stuart.beck@nemko.com |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is peak conducted power at the antenna terminal. The output power can be tuned from 21 dBm to 36 dBm in steps of 1 dB. RF cable loss and fixed attenuation (add inline or manual set with the dip switch from the module) is used to compensate for antenna gain so that the ERP is 30 watts or less. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna collocation requirements of 1.1307(b)(3). |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| P/kggZUcbkzrnlNYM5qITg== | 2008-09-12 | Class II permissive change or modification of presently authorized equipment |
| WcpZpXle8MLMOFsEg5QBfw== | 2005-11-24 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application WcpZpXle8MLMOFsEg5QBfw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 11/24/2005 Application Dated: 11/24/2005 |
| KAPSCH TRAFFICCOM CANADA INC. |
| 6020 AMBLER DRIVE |
| Mississauga, Ontario, L4W 2P1 Canada |
| Attention: Alastair Malarky , Chief Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | JQU801531 |
| Name of Grantee: | KAPSCH TRAFFICCOM CANADA INC. |
| Equipment Class: | Part 90 Location & Monitoring Transmitter |
| Notes: | RFM-S Transmitter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90.353 | 915.75 - 915.75 | 4.0 | 2.5 PM | 577KK1D |
| Power listed is peak conducted power at the antenna terminal. The output power can be tuned from 21 dBm to 36 dBm in steps of 1 dB. RF cable loss plus fixed attenuation (add inline or manual set with the dip switch from the module) is used to compensate for antenna gain so the EIRP is the same or less than RF power of the device, (36 dBm). The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3). |
EAS Grant - Application WcpZpXle8MLMOFsEg5QBfw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
KAPSCH TRAFFICCOM CANADA INC. 6020 AMBLER DRIVE Mississauga, Ontario, L4W 2P1 Canada |
Date of Grant: 11/24/2005 Application Dated: 11/24/2005 |
| Attention: Alastair Malarky , Chief Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | JQU801531 |
| Name of Grantee: | KAPSCH TRAFFICCOM CANADA INC. |
| Equipment Class: | Part 90 Location & Monitoring Transmitter |
| Notes: | RFM-S Transmitter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90.353 | 915.75 - 915.75 | 4.0 | 2.5 PM | 577KK1D |
| Power listed is peak conducted power at the antenna terminal. The output power can be tuned from 21 dBm to 36 dBm in steps of 1 dB. RF cable loss plus fixed attenuation (add inline or manual set with the dip switch from the module) is used to compensate for antenna gain so the EIRP is the same or less than RF power of the device, (36 dBm). The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko Canada Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 09/12/2008 Application Dated: 09/11/2008 |
| KAPSCH TRAFFICCOM CANADA INC. |
| 6020 AMBLER DRIVE |
| Mississauga, Ontario, L4W 2P1 Canada |
| Attention: RICHARD TURNOCK , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | JQU801531 |
| Name of Grantee: | KAPSCH TRAFFICCOM CANADA INC. |
| Equipment Class: | Part 90 Location & Monitoring Transmitter |
| Notes: | RFM-S Transmitter |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90.353 | 915.75 - 915.75 | 4.0 | 2.5 PM | 577KK1D |
| Power listed is peak conducted power at the antenna terminal. The output power can be tuned from 21 dBm to 36 dBm in steps of 1 dB. RF cable loss and fixed attenuation (add inline or manual set with the dip switch from the module) is used to compensate for antenna gain so that the ERP is 30 watts or less. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna collocation requirements of 1.1307(b)(3). |
EAS Grant - Application P/kggZUcbkzrnlNYM5qITg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
KAPSCH TRAFFICCOM CANADA INC. 6020 AMBLER DRIVE Mississauga, Ontario, L4W 2P1 Canada |
Date of Grant: 09/12/2008 Application Dated: 09/11/2008 |
| Attention: RICHARD TURNOCK , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | JQU801531 |
| Name of Grantee: | KAPSCH TRAFFICCOM CANADA INC. |
| Equipment Class: | Part 90 Location & Monitoring Transmitter |
| Notes: | RFM-S Transmitter |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90.353 | 915.75 - 915.75 | 4.0 | 2.5 PM | 577KK1D |
| Power listed is peak conducted power at the antenna terminal. The output power can be tuned from 21 dBm to 36 dBm in steps of 1 dB. RF cable loss and fixed attenuation (add inline or manual set with the dip switch from the module) is used to compensate for antenna gain so that the ERP is 30 watts or less. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna collocation requirements of 1.1307(b)(3). |
| Mail To: |