FCC ID JQU802870

Non-multilateration LMS Tranceiver

by KAPSCH TRAFFICCOM CANADA INC.

Grantee Code: JQU   Product Code: 802870
Latest application date: 2023-03-01

FCC ID Device Details

FCC IDJQU802870
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeJQU
Product Code802870
Applicant BusinessKAPSCH TRAFFICCOM CANADA INC. 🇨🇦
Related Domains kapsch.net
Equipment ClassNon-multilateration LMS Tranceiver
Test FirmTUV SUD CANADA (Gormley)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.5-903.5 MHzClass II permissive change or modification of presently authorized equipment2023-03-01
902.5-903.5 MHzOriginal Equipment2021-04-20

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2021-04-20PDF 5.5 MB
Internal PhotosInternal Photos2023-08-28PDF 1.1 MB
Internal PhotosInternal Photos2021-10-13PDF 1.2 MB
External PhotosExternal Photos2023-03-01PDF 1.4 MB
External PhotosExternal Photos2021-04-20PDF 290.3 KB
Label InformationID Label/Location Info2021-04-20PDF 86.8 KB
Test Setup PhotosTest Setup Photos2023-03-01PDF 5 MB
Test Setup PhotosTest Setup Photos2021-04-20PDF 586.2 KB
Test ReportTest Report2023-03-01PDF 1.3 MB
Test ReportTest Report2021-04-20PDF 3.5 MB
Attestation Letter without FRNAttestation Statements2023-03-01PDF 184.8 KB
Attestation Statements US agentAttestation Statements2023-03-01PDF 188.2 KB
Covered equipment attestationAttestation Statements2023-03-01PDF 135.8 KB
Agents LetterCover Letter(s)2023-03-01PDF 363 KB
C2PC LetterCover Letter(s)2023-03-01PDF 52.8 KB
Confidentiality LetterCover Letter(s)2023-03-01PDF 94.9 KB
Agency AgreementCover Letter(s)2021-04-20PDF 361.3 KB
Confidentiality RequestCover Letter(s)2021-04-20PDF 496.6 KB
RF ExposureRF Exposure Info2021-04-20PDF 248.8 KB
Block Diagram Metadata onlyBlock DiagramPDF 154.3 KB
Schematics Metadata onlySchematicsPDF 120.2 KB
Schematics Metadata onlySchematicsPDF 403.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 324.8 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 115.2 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 890.1 KB
Parts List and Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 114.6 KB

Application Information

Application IDfBGUwZJXwjgbf+Wri8CMmw==
Final Action Date2023-03-01
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0021821640
Model802870
Frequency Range902.5-903.5 MHz
Equipment ClassLMS - Part 90 Location & Monitoring Transmitter
Device DescriptionNon-multilateration LMS Tranceiver
Responsible PartyAlastair Malarky, Chief Engineer, alastair.malarky@KAPSCH.NET , 905-624-3020
Test FirmWilliam (Mac) Elliott, TUV SUD CANADA (Gormley), william.elliott@tuvsud.com , 813-284-2736
TCB Emailandy.zhang@tuvsud.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityYes
Short-Term Confidentiality Date08/28/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsC2PC as described in this filing. Power listed is conducted. This device must be professionally installed. The peak radiated output power, including antenna gain and cable loss, must not exceed 30 W ERP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 100 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The maximum antenna height above ground for non-multilateration LMS systems is 15 meters. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
fBGUwZJXwjgbf+Wri8CMmw==2023-03-01Class II permissive change or modification of presently authorized equipment
HiQKkLHALELMbRnnj5LtQw==2021-04-20Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
902.5-903.5 MHz4.980.201ppm7K46N0N90.353
903 MHz5.010.201ppm243KK1D90.353
903 MHz5.20.201ppm439KK1D90.353
910-921.5 MHz4.880.201ppm15K2N0N90.353
910.5-920.5 MHz4.760.201ppm255KK1D90.353
910.5-920.5 MHz5.960.201ppm426KK1D90.353
911-920 MHz5.080.201ppm478KK1D90.353
915.75 MHz5.40.201ppm3M01K1D90.353
915.75 MHz5.40.201ppm3M10K1D90.353

Grants

TCB Grant - Application HiQKkLHALELMbRnnj5LtQw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
Date of Grant: 04/20/2021

Application Dated: 04/16/2021
KAPSCH TRAFFICCOM CANADA INC.
6020 AMBLER DRIVE
Mississauga, Ontario, L4W 2P1
Canada
 
Attention: Alastair Malarky , Chief Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JQU802870
Name of Grantee:  KAPSCH TRAFFICCOM CANADA INC.
Equipment Class: Part 90 Location & Monitoring Transmitter
Notes: Non-multilateration LMS Tranceiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90.353 902.5  -  903.5 4.98 0.201  PM 7K46N0N
90.353 910.0  -  921.5 4.88 0.201  PM 15K2N0N
90.353 903.0  -  903.0 5.01 0.201  PM 243KK1D
90.353 910.5  -  920.5 4.76 0.201  PM 255KK1D
90.353 903.0  -  903.0 5.2 0.201  PM 439KK1D
90.353 910.5  -  920.5 5.96 0.201  PM 426KK1D
90.353 911.0  -  920.0 5.08 0.201  PM 478KK1D
90.353 915.75  -  915.75 5.4 0.201  PM 3M10K1D

Power listed is conducted. This device must be professionally installed. The peak radiated output power, including antenna gain and cable loss, must not exceed 30 W ERP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 100 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The maximum antenna height above ground for non-multilateration LMS systems is 15 meters. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application HiQKkLHALELMbRnnj5LtQw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

KAPSCH TRAFFICCOM CANADA INC.
6020 AMBLER DRIVE
Mississauga, Ontario, L4W 2P1
Canada
  Date of Grant: 04/20/2021

Application Dated: 04/16/2021
 
Attention: Alastair Malarky , Chief Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JQU802870
Name of Grantee:  KAPSCH TRAFFICCOM CANADA INC.
Equipment Class: Part 90 Location & Monitoring Transmitter
Notes: Non-multilateration LMS Tranceiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90.353 902.5  -  903.5 4.98 0.201  PM 7K46N0N
90.353 910.0  -  921.5 4.88 0.201  PM 15K2N0N
90.353 903.0  -  903.0 5.01 0.201  PM 243KK1D
90.353 910.5  -  920.5 4.76 0.201  PM 255KK1D
90.353 903.0  -  903.0 5.2 0.201  PM 439KK1D
90.353 910.5  -  920.5 5.96 0.201  PM 426KK1D
90.353 911.0  -  920.0 5.08 0.201  PM 478KK1D
90.353 915.75  -  915.75 5.4 0.201  PM 3M10K1D

Power listed is conducted. This device must be professionally installed. The peak radiated output power, including antenna gain and cable loss, must not exceed 30 W ERP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 100 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The maximum antenna height above ground for non-multilateration LMS systems is 15 meters. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application fBGUwZJXwjgbf+Wri8CMmw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV SUD America Inc.
401 Edgewater Place Suite #500
Wakefield, MA 01880
Date of Grant: 03/01/2023

Application Dated: 03/01/2023
KAPSCH TRAFFICCOM CANADA INC.
6020 AMBLER DRIVE
Mississauga, Ontario, L4W 2P1
Canada
 
Attention: Alastair Malarky , Chief Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JQU802870
Name of Grantee:  KAPSCH TRAFFICCOM CANADA INC.
Equipment Class: Part 90 Location & Monitoring Transmitter
Notes: Non-multilateration LMS Tranceiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90.353 902.5  -  903.5 4.98 0.201  PM 7K46N0N
90.353 910.0  -  921.5 4.88 0.201  PM 15K2N0N
90.353 903.0  -  903.0 5.01 0.201  PM 243KK1D
90.353 910.5  -  920.5 4.76 0.201  PM 255KK1D
90.353 903.0  -  903.0 5.2 0.201  PM 439KK1D
90.353 910.5  -  920.5 5.96 0.201  PM 426KK1D
90.353 911.0  -  920.0 5.08 0.201  PM 478KK1D
90.353 915.75  -  915.75 5.4 0.201  PM 3M01K1D

C2PC as described in this filing. Power listed is conducted. This device must be professionally installed. The peak radiated output power, including antenna gain and cable loss, must not exceed 30 W ERP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 100 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The maximum antenna height above ground for non-multilateration LMS systems is 15 meters. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application fBGUwZJXwjgbf+Wri8CMmw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

KAPSCH TRAFFICCOM CANADA INC.
6020 AMBLER DRIVE
Mississauga, Ontario, L4W 2P1
Canada
  Date of Grant: 03/01/2023

Application Dated: 03/01/2023
 
Attention: Alastair Malarky , Chief Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JQU802870
Name of Grantee:  KAPSCH TRAFFICCOM CANADA INC.
Equipment Class: Part 90 Location & Monitoring Transmitter
Notes: Non-multilateration LMS Tranceiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90.353 902.5  -  903.5 4.98 0.201  PM 7K46N0N
90.353 910.0  -  921.5 4.88 0.201  PM 15K2N0N
90.353 903.0  -  903.0 5.01 0.201  PM 243KK1D
90.353 910.5  -  920.5 4.76 0.201  PM 255KK1D
90.353 903.0  -  903.0 5.2 0.201  PM 439KK1D
90.353 910.5  -  920.5 5.96 0.201  PM 426KK1D
90.353 911.0  -  920.0 5.08 0.201  PM 478KK1D
90.353 915.75  -  915.75 5.4 0.201  PM 3M01K1D

C2PC as described in this filing. Power listed is conducted. This device must be professionally installed. The peak radiated output power, including antenna gain and cable loss, must not exceed 30 W ERP. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 100 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The maximum antenna height above ground for non-multilateration LMS systems is 15 meters. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: