FCC ID JUP-594006X-B1
R8 GNSS Receiver
by Trimble, Inc.
Grantee Code: JUP Product Code: 594006XB1
Latest application date: 2007-04-03
FCC ID Device Details
| FCC ID | JUP-594006X-B1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | JUP |
| Product Code | 594006XB1 |
| Applicant Business | Trimble, Inc. 🇺🇸 |
| Related Domains | |
| Equipment Class | R8 GNSS Receiver |
| Test Firm | Elliott Laboratories Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2007-04-03 |
| 410-470 MHz | Original Equipment | 2007-04-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| manual | Users Manual | 2007-04-03 | PDF 3.3 MB |
| int pix | Internal Photos | 2007-04-03 | PDF 387.3 KB |
| int pix | Internal Photos | 2007-04-03 | PDF 432.6 KB |
| ext pix | External Photos | 2007-04-03 | PDF 32.7 KB |
| label | ID Label/Location Info | 2007-04-03 | PDF 120.1 KB |
| setup pix | Test Setup Photos | 2007-04-03 | PDF 2.8 MB |
| tst rpt | Test Report | 2007-04-03 | PDF 1.2 MB |
| tst rpt 1 | Test Report | 2007-04-03 | PDF 1.3 MB |
| tst rpt 2 | Test Report | 2007-04-03 | PDF 3.8 MB |
| agent auth | Cover Letter(s) | 2007-04-03 | PDF 63.5 KB |
| agent ltr | Cover Letter(s) | 2007-04-03 | PDF 63.5 KB |
| conf req | Cover Letter(s) | 2007-04-03 | PDF 63.9 KB |
| prod desc | Cover Letter(s) | 2007-04-03 | PDF 18.9 KB |
| Co Lo MPE Calc | RF Exposure Info | 2007-04-03 | PDF 16 KB |
| tune up | Parts List/Tune Up Info | 2007-04-03 | PDF 58.1 KB |
Application Information
| Application ID | eMat3nRdVCJN4b70Rf+fXQ== |
|---|---|
| Final Action Date | 2007-04-03 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0016777377 |
| Model | -594006X-B1 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | R8 GNSS Receiver |
| Responsible Party | Gerardo A. Torres, Compliance Manager, gerardo_torres@trimble.com |
| Technical Contact | Juan Martinez, Elliott labs, doc@elliottlabs.com |
| Test Firm | David Bare, Elliott Laboratories Inc., dbare@elliottlabs.com |
| TCB Email | doc@elliottlabs.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output is Conducted. Device is approved for mobile operations only. Only the accompanying transmitter listed within this application is to be installed within the device shown in this filing; Use of other transmitter(s) is prohibited. Only the antennas documented in this filing, installed in the manner specified, can be used with this device. This device shall be used in such a manner as to provide a separation distance of at least 20cm between the antennas of the device and all persons in order to satisfy RF exposure requirements of 2.1091. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| eMat3nRdVCJN4b70Rf+fXQ== | 2007-04-03 | Original Equipment |
| SLMUco82rvLZI/1lS8p8Dw== | 2007-04-03 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application SLMUco82rvLZI/1lS8p8Dw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| National Technical Systems - Silicon Valley 41039 Boyce Road Fremont, CA 94538 | Date of Grant: 04/03/2007 Application Dated: 04/03/2007 |
| Trimble Navigation Ltd |
| 935 Stewart Drive |
| Sunnyvale, CA 94088-3642 |
| Attention: Gerardo Torres , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | JUP-594006X-B1 |
| Name of Grantee: | Trimble Navigation Ltd |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | R8 GNSS Receiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90.210 | 410.0 - 470.0 | 2.0 | 0E-10 Hz | 11K3G1D | |
| 90.210 | 410.0 - 470.0 | 0.4 | 0E-10 Hz | 11K3G1D | |
| 90 | 410.0 - 470.0 | 2.0 | 0E-10 Hz | 20KG1D | |
| 90 | 410.0 - 470.0 | 0.4 | 0E-10 Hz | 20KG1D |
| Power Output is Conducted. Device is approved for mobile operations only. Only the accompanying transmitter listed within this application is to be installed within the device shown in this filing; Use of other transmitter(s) is prohibited. Only the antennas documented in this filing, installed in the manner specified, can be used with this device. This device shall be used in such a manner as to provide a separation distance of at least 20cm between the antennas of the device and all persons in order to satisfy RF exposure requirements of 2.1091. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements.
|
EAS Grant - Application SLMUco82rvLZI/1lS8p8Dw==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Trimble Navigation Ltd 935 Stewart Drive Sunnyvale, CA 94088-3642 United States | Date of Grant: 04/03/2007 Application Dated: 04/03/2007 |
| Attention: Gerardo Torres , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | JUP-594006X-B1 |
| Name of Grantee: | Trimble Navigation Ltd |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | R8 GNSS Receiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90.210 | 410.0 - 470.0 | 2.0 | 0E-10 Hz | 11K3G1D | |
| 90.210 | 410.0 - 470.0 | 0.4 | 0E-10 Hz | 11K3G1D | |
| 90 | 410.0 - 470.0 | 2.0 | 0E-10 Hz | 20KG1D | |
| 90 | 410.0 - 470.0 | 0.4 | 0E-10 Hz | 20KG1D |
| Power Output is Conducted. Device is approved for mobile operations only. Only the accompanying transmitter listed within this application is to be installed within the device shown in this filing; Use of other transmitter(s) is prohibited. Only the antennas documented in this filing, installed in the manner specified, can be used with this device. This device shall be used in such a manner as to provide a separation distance of at least 20cm between the antennas of the device and all persons in order to satisfy RF exposure requirements of 2.1091. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements.
|
| Mail To: |
| EA650964 |
TCB Grant - Application eMat3nRdVCJN4b70Rf+fXQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| National Technical Systems - Silicon Valley 41039 Boyce Road Fremont, CA 94538 | Date of Grant: 04/03/2007 Application Dated: 04/03/2007 |
| Trimble Navigation Ltd |
| 935 Stewart Drive |
| Sunnyvale, CA 94088-3642 |
| Attention: Gerardo Torres , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | JUP-594006X-B1 |
| Name of Grantee: | Trimble Navigation Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | R8 GNSS Receiver |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00122 |
| Power Output is Conducted. Device is approved for mobile operations only. Only the accompanying transmitter listed within this application is to be installed within the device shown in this filing; Use of other transmitter(s) is prohibited. Only the antennas documented in this filing, installed in the manner specified, can be used with this device. This device shall be used in such a manner as to provide a separation distance of at least 20cm between the antennas of the device and all persons in order to satisfy RF exposure requirements of 2.1091. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements.
|
EAS Grant - Application eMat3nRdVCJN4b70Rf+fXQ==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Trimble Navigation Ltd 935 Stewart Drive Sunnyvale, CA 94088-3642 United States | Date of Grant: 04/03/2007 Application Dated: 04/03/2007 |
| Attention: Gerardo Torres , Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | JUP-594006X-B1 |
| Name of Grantee: | Trimble Navigation Ltd |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | R8 GNSS Receiver |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00122 |
| Power Output is Conducted. Device is approved for mobile operations only. Only the accompanying transmitter listed within this application is to be installed within the device shown in this filing; Use of other transmitter(s) is prohibited. Only the antennas documented in this filing, installed in the manner specified, can be used with this device. This device shall be used in such a manner as to provide a separation distance of at least 20cm between the antennas of the device and all persons in order to satisfy RF exposure requirements of 2.1091. End-users must be provided with operating instructions for satisfying RF exposure compliance requirements.
|
| Mail To: |
| EA876251 |