FCC ID JUP-R580
Trimble Designed GNSS System, R580
by Trimble, Inc.
Grantee Code: JUP Product Code: R580
Latest application date: 2023-07-25
FCC ID Device Details
| FCC ID | JUP-R580 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | JUP |
| Product Code | R580 |
| Applicant Business | Trimble, Inc. 🇺🇸 |
| Related Domains |  trimble.com |
| Equipment Class | Trimble Designed GNSS System, R580 |
| Test Firm | CETECOM Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-07-25 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2023-07-25 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: SQG-LWBPLUS Grant Date: 12/21/2021 | 2023-07-24 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: SQG-LWBPLUS Grant Date: 12/21/2021 | 2023-07-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2023-07-24 | PDF 81.7 KB |
| Label | ID Label/Location Info | 2023-07-24 | PDF 207.1 KB |
| Test setup photos | Test Setup Photos | 2024-01-21 | PDF 4 MB |
| Test Report | Test Report | 2023-07-25 | PDF 1.2 MB |
| antenna information | Test Report | 2023-07-25 | PDF 1.1 MB |
| test report | Test Report | 2023-07-25 | PDF 1 MB |
| Attestation letter | Attestation Statements | 2023-07-25 | PDF 135.6 KB |
| Attestation letter 2.911(D)(5) | Attestation Statements | 2023-07-25 | PDF 210 KB |
| Attestation letter 2.911(D)(7) | Attestation Statements | 2023-07-25 | PDF 244.7 KB |
| Attestation letter 2.911(D)(7) | Attestation Statements | 2023-07-24 | PDF 66.1 KB |
| C2PC request | Cover Letter(s) | 2023-07-25 | PDF 236.1 KB |
| Confidentiality short term | Cover Letter(s) | 2023-07-25 | PDF 282.8 KB |
| cover letter | Cover Letter(s) | 2023-07-24 | PDF 819.8 KB |
| RF Exposure report | RF Exposure Info | 2023-07-25 | PDF 467.5 KB |
Application Information
| Application ID | sO90e2vPF9oUV1GLlHhnMQ== |
|---|---|
| Final Action Date | 2023-07-25 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0005921291 |
| Model | R580 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Trimble Designed GNSS System, R580 |
| Responsible Party | Tony Phan, GNSS Regulatory Compliance Manager, tony_phan@trimble.com , 4084818491 |
| Test Firm | Meinolf Glunz, CETECOM Inc., meinolf.glunz@cetecom.com  , 408-586-6301 |
| TCB Email | jeff.klinger@cetecom.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 01/21/2024 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC to add additional antenna as described in the filing. Professional Installation. Output power listed is conducted. This grant is valid only when installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| sO90e2vPF9oUV1GLlHhnMQ== | 2023-07-25 | Class II permissive change or modification of presently authorized equipment |
| XyybrTKb5xFfpZhTj+YOAg== | 2023-07-25 | Class II permissive change or modification of presently authorized equipment |
| yiy3wDhvTy/OYyUwqX5zig== | 2023-07-24 | Change in identification of presently authorized equipment. Original FCC ID: SQG-LWBPLUS Grant Date: 12/21/2021 |
| /DjeCDIOEFxdBUXnWpa9QQ== | 2023-07-24 | Change in identification of presently authorized equipment. Original FCC ID: SQG-LWBPLUS Grant Date: 12/21/2021 |
Equipment Authorization
Grants
TCB Grant - Application yiy3wDhvTy/OYyUwqX5zig==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 |
Date of Grant: 07/24/2023 Application Dated: 07/24/2023 |
| Trimble, Inc. |
| 935 Stewart Drive |
| Sunnyvale, CA 94085 |
| Attention: Tony Phan , GNSS Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | JUP-R580 |
| Name of Grantee: | Trimble, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11n 2.4GHz + BT5.2 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.004 | |||
| 15C | 2412.0 - 2462.0 | 0.428 |
| Professional Installation. Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode. |
EAS Grant - Application yiy3wDhvTy/OYyUwqX5zig==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Trimble, Inc. 935 Stewart Drive Sunnyvale, CA 94085 United States |
Date of Grant: 07/24/2023 Application Dated: 07/24/2023 |
| Attention: Tony Phan , GNSS Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | JUP-R580 |
| Name of Grantee: | Trimble, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11n 2.4GHz + BT5.2 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.004 | |||
| 15C | 2412.0 - 2462.0 | 0.428 |
| Professional Installation. Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 |
Date of Grant: 07/25/2023 Application Dated: 07/25/2023 |
| Trimble, Inc. |
| 935 Stewart Drive |
| Sunnyvale, CA 94085 |
| Attention: Tony Phan , GNSS Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | JUP-R580 |
| Name of Grantee: | Trimble, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Trimble Designed GNSS System, R580 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.428 |
| C2PC to add additional antenna as described in the filing and to reduce the grant frequency range listed on the grant. Professional Installation. Output power listed is conducted. This grant is valid only when installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode. |
EAS Grant - Application XyybrTKb5xFfpZhTj+YOAg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Trimble, Inc. 935 Stewart Drive Sunnyvale, CA 94085 United States |
Date of Grant: 07/25/2023 Application Dated: 07/25/2023 |
| Attention: Tony Phan , GNSS Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | JUP-R580 |
| Name of Grantee: | Trimble, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Trimble Designed GNSS System, R580 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.428 |
| C2PC to add additional antenna as described in the filing and to reduce the grant frequency range listed on the grant. Professional Installation. Output power listed is conducted. This grant is valid only when installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz bandwidth mode. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 |
Date of Grant: 07/25/2023 Application Dated: 07/25/2023 |
| Trimble, Inc. |
| 935 Stewart Drive |
| Sunnyvale, CA 94085 |
| Attention: Tony Phan , GNSS Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | JUP-R580 |
| Name of Grantee: | Trimble, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Trimble Designed GNSS System, R580 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.005 |
| C2PC to add additional antenna as described in the filing. Professional Installation. Output power listed is conducted. This grant is valid only when installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application sO90e2vPF9oUV1GLlHhnMQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Trimble, Inc. 935 Stewart Drive Sunnyvale, CA 94085 United States |
Date of Grant: 07/25/2023 Application Dated: 07/25/2023 |
| Attention: Tony Phan , GNSS Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | JUP-R580 |
| Name of Grantee: | Trimble, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Trimble Designed GNSS System, R580 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.005 |
| C2PC to add additional antenna as described in the filing. Professional Installation. Output power listed is conducted. This grant is valid only when installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM Inc. 411 Dixon Landing Road Milpitas, CA 95035 |
Date of Grant: 07/24/2023 Application Dated: 07/24/2023 |
| Trimble, Inc. |
| 935 Stewart Drive |
| Sunnyvale, CA 94085 |
| Attention: Tony Phan , GNSS Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | JUP-R580 |
| Name of Grantee: | Trimble, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11n 2.4GHz + BT5.2 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.005 |
| Professional Installation. Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application /DjeCDIOEFxdBUXnWpa9QQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Trimble, Inc. 935 Stewart Drive Sunnyvale, CA 94085 United States |
Date of Grant: 07/24/2023 Application Dated: 07/24/2023 |
| Attention: Tony Phan , GNSS Regulatory Compliance Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | JUP-R580 |
| Name of Grantee: | Trimble, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11n 2.4GHz + BT5.2 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.005 |
| Professional Installation. Modular Approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna's as listed in this application must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter procedures. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |