1. FCC ID
  2. JUP
  3. JUP-R8S

FCC ID JUP-R8S

Bluetooth HCI Module

by Trimble, Inc.

Grantee Code: JUP   Product Code: R8S
Latest application date: 2020-10-16

FCC ID Device Details

FCC IDJUP-R8S
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeJUP
Product CodeR8S
Applicant BusinessTrimble, Inc. 🇺🇸
Related Domains trimble.com
Equipment ClassBluetooth HCI Module
Test FirmBureau Veritas Consumer Products Services, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-10-16
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-10-16
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: Z64-2564N Grant Date: 04/01/20142020-10-02
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: Z64-2564N Grant Date: 04/01/20142020-10-02

Exhibits

DocumentTypeAvailableFile
Internal Photos_20201012-162201_R8s Internal PhotosInternal Photos2020-10-16PDF 966.5 KB
Internal Photos_20200916-172858_Internal photoInternal Photos2020-10-02PDF 107.9 KB
External Photos_20201012-162157_External PhotoExternal Photos2020-10-16PDF 391.4 KB
External Photos_20200916-172859_External photoExternal Photos2020-10-02PDF 65.7 KB
Label_20200916-172858_Draft Label for moduleID Label/Location Info2020-10-02PDF 15.6 KB
Test Setup Photos_20201012-162157_Setup PhotoTest Setup Photos2020-10-16PDF 358.3 KB
Test Report_20201012-162159_FCC_IC_RF_SL20051301-TRB-015_Co-location Rev_3.0Test Report2020-10-16PDF 835.4 KB
Test Report_20201012-162159_FCC_RF_SL20051301-TRB-015_MPE Rev_2.0RF Exposure Info2020-10-16PDF 461.9 KB
Agency Agreement_20201012-162156_SCS-F18 Product Certification Representative AuCover Letter(s)2020-10-16PDF 141.6 KB
Cover Letter_20201012-162154_SCS-F159 FCC Class II Permissive Change Request LetCover Letter(s)2020-10-16PDF 169.8 KB
Agency Agreement_20200916-172858_SCS-F18 Product Certification Representative AuCover Letter(s)2020-10-02PDF 141.6 KB
Cover Letter_20200916-172855_SCS-F28 Change of ID Request letter (Ver 3.0) FCCCover Letter(s)2020-10-02PDF 218.8 KB
Cover Letter_20200916-172856_(new)_TI_authorization_letter_for_Trimble_to_submiCover Letter(s)2020-10-02PDF 376.5 KB
Cover Letter_20200916-172856_(new)_TI_authorization_letter_for_Trimble_to_submitCover Letter(s)2020-10-02PDF 376.5 KB

Application Information

Application IDyq0Ku4gZEsHtrUyUcuet8Q==
Final Action Date2020-10-16
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0005921291
Model-R8S
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionBluetooth HCI Module
Responsible PartyTony Phan, GNSS Regulatory Compliance Manager, tony_phan@trimble.com , 4084818491
Test FirmSarb Shelopal, Bureau Veritas Consumer Products Services, Inc., Sarbjit.Shelopal@bureauveritas.com , +1 925 963 4420
TCB Emailtcb@bureauveritas.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsC2PC to add host model R8s with copper monopole antenna, -4.6dBi maximum gain and co-locate with FCC ID: KEAXDLM. Power output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
yq0Ku4gZEsHtrUyUcuet8Q==2020-10-16Class II permissive change or modification of presently authorized equipment
CWt117sMNqh1bc1xaBPHVA==2020-10-16Class II permissive change or modification of presently authorized equipment
ITwVTkS0dYJKn4DdiRd7FQ==2020-10-02Change in identification of presently authorized equipment. Original FCC ID: Z64-2564N Grant Date: 04/01/2014
8dFNJjsfGJH4BsT7sIO8uw==2020-10-02Change in identification of presently authorized equipment. Original FCC ID: Z64-2564N Grant Date: 04/01/2014

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.019000015CCC
2402-2480 MHz0.014000015CCC

Grants

TCB Grant - Application yq0Ku4gZEsHtrUyUcuet8Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 10/16/2020

Application Dated: 10/16/2020
Trimble, Inc.
935 Stewart Drive
Sunnyvale, CA 94085
 
Attention: Tony Phan , GNSS Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JUP-R8S
Name of Grantee:  Trimble, Inc.
Equipment Class: Digital Transmission System
Notes: Bluetooth HCI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.014  

C2PC to add host model R8s with copper monopole antenna, -4.6dBi maximum gain and co-locate with FCC ID: KEAXDLM. Power output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application yq0Ku4gZEsHtrUyUcuet8Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Trimble, Inc.
935 Stewart Drive
Sunnyvale, CA 94085
United States 		  Date of Grant: 10/16/2020

Application Dated: 10/16/2020
 
Attention: Tony Phan , GNSS Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JUP-R8S
Name of Grantee:  Trimble, Inc.
Equipment Class: Digital Transmission System
Notes: Bluetooth HCI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.014  

C2PC to add host model R8s with copper monopole antenna, -4.6dBi maximum gain and co-locate with FCC ID: KEAXDLM. Power output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application ITwVTkS0dYJKn4DdiRd7FQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 10/02/2020

Application Dated: 10/02/2020
Trimble, Inc.
935 Stewart Drive
Sunnyvale, CA 94085
 
Attention: Tony Phan , GNSS Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JUP-R8S
Name of Grantee:  Trimble, Inc.
Equipment Class: Digital Transmission System
Notes: Bluetooth HCI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.014  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ITwVTkS0dYJKn4DdiRd7FQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Trimble, Inc.
935 Stewart Drive
Sunnyvale, CA 94085
United States 		  Date of Grant: 10/02/2020

Application Dated: 10/02/2020
 
Attention: Tony Phan , GNSS Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JUP-R8S
Name of Grantee:  Trimble, Inc.
Equipment Class: Digital Transmission System
Notes: Bluetooth HCI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.014  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application CWt117sMNqh1bc1xaBPHVA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 10/16/2020

Application Dated: 10/16/2020
Trimble, Inc.
935 Stewart Drive
Sunnyvale, CA 94085
 
Attention: Tony Phan , GNSS Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JUP-R8S
Name of Grantee:  Trimble, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth HCI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.019  

C2PC to add host model R8s with copper monopole antenna, -4.6dBi maximum gain and co-locate with FCC ID: KEAXDLM. Power output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application CWt117sMNqh1bc1xaBPHVA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Trimble, Inc.
935 Stewart Drive
Sunnyvale, CA 94085
United States 		  Date of Grant: 10/16/2020

Application Dated: 10/16/2020
 
Attention: Tony Phan , GNSS Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JUP-R8S
Name of Grantee:  Trimble, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth HCI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.019  

C2PC to add host model R8s with copper monopole antenna, -4.6dBi maximum gain and co-locate with FCC ID: KEAXDLM. Power output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 8dFNJjsfGJH4BsT7sIO8uw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
 Date of Grant: 10/02/2020

Application Dated: 10/02/2020
Trimble, Inc.
935 Stewart Drive
Sunnyvale, CA 94085
 
Attention: Tony Phan , GNSS Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JUP-R8S
Name of Grantee:  Trimble, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth HCI Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.019  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 8dFNJjsfGJH4BsT7sIO8uw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Trimble, Inc.
935 Stewart Drive
Sunnyvale, CA 94085
United States 		  Date of Grant: 10/02/2020

Application Dated: 10/02/2020
 
Attention: Tony Phan , GNSS Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JUP-R8S
Name of Grantee:  Trimble, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Bluetooth HCI Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.019  

Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: