FCC ID JVPCF61

GSM Flip Camera Phone with Bluetooth

by Benq Corporation

Grantee Code: JVP   Product Code: CF61
Latest application date: 2006-05-16

FCC ID Device Details

FCC IDJVPCF61
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeJVP
Product CodeCF61
Applicant BusinessBenq Corporation 🇹🇼
Related Domains benq.com
Equipment ClassGSM Flip Camera Phone with Bluetooth
Test FirmSPORTON International Inc

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2006-05-16
1850.2-1909.8 MHzOriginal Equipment2006-05-16

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2006-05-16PDF 1.2 MB
Int PhotoInternal Photos2006-05-16PDF 1.7 MB
Internal PicsInternal Photos2006-05-16PDF 1.7 MB
Ext PhotoExternal Photos2006-05-16PDF 1.2 MB
External PicsExternal Photos2006-05-16PDF 1.2 MB
Label and LocationID Label/Location Info2006-05-16PDF 57.5 KB
Test SetupTest Setup Photos2006-05-16PDF 348.5 KB
BT ReportTest Report2006-05-16PDF 2.2 MB
GSM Test ReportTest Report2006-05-16PDF 2.2 MB
ATCB CommentsCover Letter(s)2006-05-16PDF 46.9 KB
Confid RequestCover Letter(s)2006-05-16PDF 226.1 KB
Cover LetterCover Letter(s)2006-05-16PDF 226.1 KB
SAR ReportRF Exposure Info2006-05-16PDF 3.3 MB
Block Metadata onlyBlock DiagramPDF 187.9 KB
Schema Metadata onlySchematicsPDF 274.7 KB
BT Op Description Metadata onlyOperational DescriptionPDF 29.9 KB
GSM Op Descript Metadata onlyOperational DescriptionPDF 10.9 KB
Parts Metadata onlyParts List/Tune Up InfoPDF 47.5 KB
Tune Up Metadata onlyParts List/Tune Up InfoPDF 10.8 KB

Application Information

Application IDmfimLg4Swd98Pl0Ci9vXng==
Final Action Date2006-05-16
Application PurposeOriginal Equipment
Applicant FRN0006817563
ModelCF61
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionGSM Flip Camera Phone with Bluetooth
Responsible PartyWenny Lan, Sr. Director, System & Product Regulatory, Wenny.Lan@BenQ.com , +886-2-2658-8800
Technical ContactDaniel Lee, Sporton International, daniel@sporton.com.tw , +886 3 327 3456
Test FirmKathy Lin, SPORTON International Inc, kathylin@sporton.com.tw , 886-2-2696-2468
TCB Emailhotline@atcb.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted. The antenna used for this transmitter is co-located with a Part 24 GSM transceiver. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
mfimLg4Swd98Pl0Ci9vXng==2006-05-16Original Equipment
IKyKjI83GpvugBZmgyKmIA==2006-05-16Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
1850.2-1909.8 MHz1.74000000.0200000000ppm300KGXW24EBC
2402-2480 MHz0.001000015C

Grants

TCB Grant - Application mfimLg4Swd98Pl0Ci9vXng==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/16/2006

Application Dated: 05/14/2006
Benq Corporation
16 Jihu Road, Neihu, Taipei 114, Taiwan
Taipei, 114
Taiwan
 
Attention: Wenny Lan , Sr. Director, System & Product Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JVPCF61
Name of Grantee:  Benq Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: GSM Flip Camera Phone with Bluetooth
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.001  

Power Output listed is Conducted. The antenna used for this transmitter is co-located with a Part 24 GSM transceiver. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application mfimLg4Swd98Pl0Ci9vXng==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Benq Corporation
16 Jihu Road, Neihu, Taipei 114, Taiwan
Taipei, 114
Taiwan
  Date of Grant: 05/16/2006

Application Dated: 05/14/2006
 
Attention: Wenny Lan , Sr. Director, System & Product Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JVPCF61
Name of Grantee:  Benq Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: GSM Flip Camera Phone with Bluetooth
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.001  

Power Output listed is Conducted. The antenna used for this transmitter is co-located with a Part 24 GSM transceiver. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application IKyKjI83GpvugBZmgyKmIA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 05/16/2006

Application Dated: 05/14/2006
Benq Corporation
16 Jihu Road, Neihu, Taipei 114, Taiwan
Taipei, 114
Taiwan
 
Attention: Wenny Lan , Sr. Director, System & Product Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JVPCF61
Name of Grantee:  Benq Corporation
Equipment Class: PCS Licensed Transmitter held to ear
Notes: GSM Flip Camera Phone with Bluetooth
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 24E 1850.2  -  1909.8 1.74 0.02  PM 300KGXW

This device contains 900 MHz GSM and 1800 MHz DCS functions that are not operational in U.S. Territories. This filing is only applicable for 1900 MHz Licensed PCS operations.

Power Output is EIRP. SAR compliance for body-worn operating conditions is limited to the specific configuration tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 15mm separation between the device and the user’s body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Head: 1.08W/kg; Body-worn: 0.97W/kg


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

EAS Grant - Application IKyKjI83GpvugBZmgyKmIA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Benq Corporation
16 Jihu Road, Neihu, Taipei 114, Taiwan
Taipei, 114
Taiwan
  Date of Grant: 05/16/2006

Application Dated: 05/14/2006
 
Attention: Wenny Lan , Sr. Director, System & Product Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JVPCF61
Name of Grantee:  Benq Corporation
Equipment Class: PCS Licensed Transmitter held to ear
Notes: GSM Flip Camera Phone with Bluetooth
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 24E 1850.2  -  1909.8 1.74 0.02  PM 300KGXW

This device contains 900 MHz GSM and 1800 MHz DCS functions that are not operational in U.S. Territories. This filing is only applicable for 1900 MHz Licensed PCS operations.

Power Output is EIRP. SAR compliance for body-worn operating conditions is limited to the specific configuration tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 15mm separation between the device and the user’s body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Head: 1.08W/kg; Body-worn: 0.97W/kg


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To: