FCC ID JVPRX

Wireless Receiver

by Benq Corporation

Grantee Code: JVP   Product Code: RX
Latest application date: 2013-05-20

FCC ID Device Details

FCC IDJVPRX
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeJVP
Product CodeRX
Applicant BusinessBenq Corporation 🇹🇼
Related Domains benq.com
Equipment ClassWireless Receiver
Test FirmBureau Veritas CPS (H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5745-5805 MHzOriginal Equipment2013-05-20
5180-5240 MHzOriginal Equipment2013-05-20

Exhibits

DocumentTypeAvailableFile
User Manual.pdfUsers Manual2013-05-20PDF 1.9 MB
Internal Photos.pdfInternal Photos2013-05-20PDF 1.4 MB
External Photos.pdfExternal Photos2013-05-20PDF 660.1 KB
Label and Location.pdfID Label/Location Info2013-05-20PDF 47.7 KB
Operational Description.pdfOperational Description2013-05-20PDF 40.3 KB
Test Setup Photos.pdfTest Setup Photos2013-05-20PDF 349.4 KB
Test Report DTS.pdfTest Report2013-05-20PDF 499.4 KB
Test Report NII.pdfTest Report2013-05-20PDF 435.9 KB
Attestation (Channel and Mode Declaration).pdfAttestation Statements2013-05-20PDF 163.3 KB
Confidentiality Request.pdfCover Letter(s)2013-05-20PDF 127.4 KB
Cover Letter (Agent Authorization).pdfCover Letter(s)2013-05-20PDF 140.2 KB
Cover Letter (Modular Approval Request).pdfCover Letter(s)2013-05-20PDF 41.5 KB
RF Exposure Info.pdfRF Exposure Info2013-05-20PDF 39.3 KB

Application Information

Application IDtEYN2VM3hlgnYIt6oRTuTA==
Final Action Date2013-05-20
Application PurposeOriginal Equipment
Applicant FRN0006817563
ModelRX
Frequency Range5745-5805 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless Receiver
Responsible PartyDerek Tseng, Sr. Manager, Products Regulatory, Derek.Tseng@benq.com , +886-2-2658-8800
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@tw.bureauveritas.com , 886-3-3183232
TCB Emailcertification@curtis-straus.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

Applications

Application IDDatePurpose
tEYN2VM3hlgnYIt6oRTuTA==2013-05-20Original Equipment
9Es4hijqbkddnLU+SmKGtQ==2013-05-20Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
5180-5240 MHz0.026000015E20, CC
5745-5805 MHz0.155000015C20, CC

Grants

TCB Grant - Application tEYN2VM3hlgnYIt6oRTuTA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 05/20/2013

Application Dated: 05/20/2013
Benq Corporation
16 Jihu Road, Neihu, Taipei 114, Taiwan
Taipei, 114
Taiwan
 
Attention: Derek Tseng , Sr. Manager, Products Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JVPRX
Name of Grantee:  Benq Corporation
Equipment Class: Digital Transmission System
Notes: Wireless Receiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 CC 15C 5745.0  -  5805.0 0.155  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application tEYN2VM3hlgnYIt6oRTuTA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Benq Corporation
16 Jihu Road, Neihu, Taipei 114, Taiwan
Taipei, 114
Taiwan
  Date of Grant: 05/20/2013

Application Dated: 05/20/2013
 
Attention: Derek Tseng , Sr. Manager, Products Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JVPRX
Name of Grantee:  Benq Corporation
Equipment Class: Digital Transmission System
Notes: Wireless Receiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 CC 15C 5745.0  -  5805.0 0.155  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 9Es4hijqbkddnLU+SmKGtQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Curtis-Straus LLC
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 05/20/2013

Application Dated: 05/20/2013
Benq Corporation
16 Jihu Road, Neihu, Taipei 114, Taiwan
Taipei, 114
Taiwan
 
Attention: Derek Tseng , Sr. Manager, Products Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JVPRX
Name of Grantee:  Benq Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Receiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 CC 15E 5180.0  -  5240.0 0.026  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 9Es4hijqbkddnLU+SmKGtQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Benq Corporation
16 Jihu Road, Neihu, Taipei 114, Taiwan
Taipei, 114
Taiwan
  Date of Grant: 05/20/2013

Application Dated: 05/20/2013
 
Attention: Derek Tseng , Sr. Manager, Products Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JVPRX
Name of Grantee:  Benq Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Receiver
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
20 CC 15E 5180.0  -  5240.0 0.026  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.


20: All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: