FCC ID JVPTDY31

Wireless USB Adapter

by Benq Corporation

Grantee Code: JVP   Product Code: TDY31
Latest application date: 2022-02-11

FCC ID Device Details

FCC IDJVPTDY31
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeJVP
Product CodeTDY31
Applicant BusinessBenq Corporation 🇹🇼
Related Domains benq.com
Equipment ClassWireless USB Adapter
Test FirmBureau Veritas Shenzhen Co., Ltd. Dongguan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2022-02-11
5180-5240 MHzOriginal Equipment2022-02-11

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2022-07-28PDF 4.9 MB
Internal photosInternal Photos2022-07-28PDF 798.5 KB
External PhotosExternal Photos2022-07-28PDF 565.5 KB
Label and locationID Label/Location Info2022-02-11PDF 785 KB
RF Test set-up photosTest Setup Photos2022-07-28PDF 425.2 KB
DFS Test ReportTest Report2022-02-11PDF 585.5 KB
RF Test Report Metadata onlyTest Report2022-02-11PDF 1.7 MB
RF Test Report rev1Test Report2022-02-11PDF 1.7 MB
RF Test Report-NIITest Report2022-02-11PDF 2.7 MB
DFS U-NII Device Declaration LetterCover Letter(s)2022-02-11PDF 536 KB
LTC/STC LetterCover Letter(s)2022-02-11PDF 120 KB
WIFI Channel 12&13 Description letterCover Letter(s)2022-02-11PDF 81.7 KB
RF Exposure reportRF Exposure Info2022-02-11PDF 256.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 214.5 KB
Schematics Metadata onlySchematicsPDF 772.9 KB
Operational Description Metadata onlyOperational DescriptionPDF 44.1 KB
Operational description Metadata onlyOperational DescriptionPDF 44.1 KB
Ops Description Metadata onlyOperational DescriptionPDF 17.8 KB
SW Declaration Letter Metadata onlyOperational DescriptionPDF 161.5 KB

Application Information

Application IDvMCJXq4nJJD4AfYc7eHwww==
Final Action Date2022-02-11
Application PurposeOriginal Equipment
Applicant FRN0006817563
ModelTDY31
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless USB Adapter
Responsible PartyWenny Lan, Sr. Director, System & Product Regulatory, Wenny.Lan@BenQ.com , +886-2-2658-8800
Test FirmEdwin Ye, Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch, edwin.ye@bureauveritas.com , 86-20-8714 8549
TCB Emailcertification@bureauveritas.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date07/28/2022
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsRF output power is conducted. Device is 2X2 MIMO Device contains 20 and 40 MHz signal bandwidth. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
vMCJXq4nJJD4AfYc7eHwww==2022-02-11Original Equipment
MFj9X6ptpjtBJI8V7PH6fg==2022-02-11Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.216531015CCC, MO
5180-5240 MHz0.07180715ECC, MO
5260-5320 MHz0.05496315ECC, MO, ND
5500-5700 MHz0.03628815ECC, MO, ND
5745-5825 MHz0.04895715ECC, MO

Grants

TCB Grant - Application vMCJXq4nJJD4AfYc7eHwww==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 02/11/2022

Application Dated: 01/28/2022
Benq Corporation
16 Jihu Road, Neihu, Taipei 114, Taiwan
Taipei, 114
Taiwan
 
Attention: Wenny Lan , Sr. Director, System & Product Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JVPTDY31
Name of Grantee:  Benq Corporation
Equipment Class: Digital Transmission System
Notes: Wireless USB Adapter
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.216531  

RF output power is conducted. Device is 2X2 MIMO Device contains 20 and 40 MHz signal bandwidth. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application vMCJXq4nJJD4AfYc7eHwww==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Benq Corporation
16 Jihu Road, Neihu, Taipei 114, Taiwan
Taipei, 114
Taiwan
  Date of Grant: 02/11/2022

Application Dated: 01/28/2022
 
Attention: Wenny Lan , Sr. Director, System & Product Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JVPTDY31
Name of Grantee:  Benq Corporation
Equipment Class: Digital Transmission System
Notes: Wireless USB Adapter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.216531  

RF output power is conducted. Device is 2X2 MIMO Device contains 20 and 40 MHz signal bandwidth. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application MFj9X6ptpjtBJI8V7PH6fg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 02/11/2022

Application Dated: 01/28/2022
Benq Corporation
16 Jihu Road, Neihu, Taipei 114, Taiwan
Taipei, 114
Taiwan
 
Attention: Wenny Lan , Sr. Director, System & Product Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JVPTDY31
Name of Grantee:  Benq Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless USB Adapter
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.071807  
CC MO ND 15E 5260.0  -  5320.0 0.054963  
CC MO ND 15E 5500.0  -  5700.0 0.036288  
CC MO 15E 5745.0  -  5825.0 0.048957  

RF output power is conducted. Device contains 20/40/80 MHz signal bandwidth. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Device is 2X2 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application MFj9X6ptpjtBJI8V7PH6fg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Benq Corporation
16 Jihu Road, Neihu, Taipei 114, Taiwan
Taipei, 114
Taiwan
  Date of Grant: 02/11/2022

Application Dated: 01/28/2022
 
Attention: Wenny Lan , Sr. Director, System & Product Regulatory

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  JVPTDY31
Name of Grantee:  Benq Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless USB Adapter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.071807  
CC MO ND 15E 5260.0  -  5320.0 0.054963  
CC MO ND 15E 5500.0  -  5700.0 0.036288  
CC MO 15E 5745.0  -  5825.0 0.048957  

RF output power is conducted. Device contains 20/40/80 MHz signal bandwidth. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. Device is 2X2 MIMO. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: